Free tools Windows power users keep installed
One-click scans. No signup required.
Turn the robot off before cleaning, then follow its manual for removing parts and identifying safe cleaning methods. Clear hair from brushes and wheels, gently dust the filter, wipe sensors with a dry microfiber cloth, and clean the dock only as its instructions allow. A part that is washable on one model—or a dock with a removable, washable base—may not be safe to rinse on another.
Before you start
- Switch the robot off. Roborock recommends turning its vacuum off before maintenance; consult your own model’s manual for the exact shutdown and access steps. See Roborock’s maintenance guidance.
- Check the manual for each part. Find out how to remove brushes and filters, where sensors are located, whether the filter can be washed, how to clean charging contacts, and whether dock components can be removed or rinsed.
- Use gentle tools. A dry microfiber cloth and a soft-bristle brush are useful for routine dust and debris. Do not apply cleaning solution to sensor covers or use water on a component unless the manufacturer specifically permits it.
Clean the main and side brushes
Remove hair and debris
Remove the roller brush and side brush according to the manual. Pull away hair, thread, and other debris, then clear the brush cavity and guard before reinstalling the parts. Check the brush axles too: hair wrapped around an axle can interfere with movement even when the visible brush looks clear.
As an Amazon Associate I earn from qualifying purchases.
Inspect for wear
Look for damaged bristles, a worn rubber strip on the brush guard, or other damage. Replace a part when its condition calls for it, using one listed as compatible with your exact robot model. Roborock says its rollers should be replaced every 6 to 12 months, but that is Roborock’s guidance—not a universal interval for other models. Its article also recommends replacing guards when the rubber strip wears down and side brushes when damaged. See Roborock’s maintenance article.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Clean the filter without damaging it
- Remove and empty the dustbin as directed by the manual.
- Tap loose dust from the filter over a bin. Roborock’s maintenance article also suggests a soft-bristle brush for particles that remain.
- Check the manual before washing. Wash the filter only if that exact model’s instructions say it is washable; if you wash an approved filter, let it dry completely before reinstalling it.
Filter instructions are model-specific. For example, Roborock’s Q7 Max+ product page describes that model’s E11-rated filter as washable; that does not establish that filters in other Roborock models—or other brands—can be rinsed. See the Roborock Q7 Max+ product page.
#1 Best Overall
- Hepa filters for Ilife Vacuum model V3, V3s V3s pro V5 V5s V5s Pro Vacuum Cleaning Robot. Ilife Filter Replacement.
- ILIFE V3s pro Filters, Made of high quality efficient filter material.
- 100% Compatible with Original Ilife Filters. ILIFE V3s Replacement Filters, ILIFE V3s pro Filters
- Package include: 10 pcs Replacement Filters
- Good quality level of our ILIFE Robot Vacuum Replacement Parts/ ILIFE Hepa Filter, full money back for any quality problem within 2 months
Wipe the sensors gently
Use a clean, dry microfiber cloth to wipe sensor surfaces gently. Roborock cautions that abrasive cleaners can damage sensor coverings and advises against cleaning solutions. Sensor locations vary, so use the manual to find them rather than assuming every robot has sensors in the same places. Roborock notes that its sensors are on the sides and bottom of the machine; see its sensor and maintenance guidance.
Check wheels and charging contacts
Remove hair and thread from the wheels and axles, then check that the wheels turn freely. Keep charging contacts free of grime, using the cleaning method specified in your model’s manual. Roborock’s troubleshooting guidance says dirty contacts can cause charging problems and recommends wiping them with a dry cloth. Because that page is in German and concerns Roborock, check your own manufacturer’s instructions rather than applying its advice automatically to another brand. See Roborock’s troubleshooting page.
Rank #2
- 【𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 𝐌𝐨𝐝𝐞𝐥𝐬】Our BR151 robot vacuum replacement parts perfectly fits for iMartine BR151, for XIEBro Life BR151, for MAMNV BR151, for ZCWA BR151, for ONSON BR151, for MANVN BR151, for ZC WAS BR151, for GOOVI BR151, for GTTVO BR151,for Tuya BR151, for bObsweep Leaf 000-BR-150, for bObsweep Charlotte, for Kilgone G20, for MANVINS G20. NOT compatible with other models. Please double-check your model before ordering
- 【𝐕𝐚𝐥𝐮𝐚𝐛𝐥𝐞 𝐏𝐚𝐜𝐤𝐚𝐠𝐞】The package includes 4 x BR151 robot vacuum filters, 4 x BR151 robot vacuum mop pads, 6 x BR151 robot vacuum brushes, and 1 x cleaning tool. Our BR151 accessory set is designed to save you the trouble of frequently purchasing individual accessories. Everything you need is in one set to keep your vacuum cleaner running smoothly and performing at a high level
- 【𝐒𝐮𝐩𝐞𝐫𝐢𝐨𝐫 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】These BR151 replacement filters can attach 99.97% of particles as small as 0.3 microns, including dust, pollen, dirt, pet dander, hair, and more. The BR151 mop pads are made from premium microfiber material with high absorbency, effectively wiping away stubborn stains. The durable seam design ensures they withstand daily wear and tear. The 3-arm spin BR151 side brushes feature soft bristles that efficiently clean dirt, dust, and debris from corners and edges
- 【𝐃𝐢𝐬𝐭𝐢𝐧𝐠𝐮𝐢𝐬𝐡 𝐒𝐢𝐝𝐞 𝐁𝐫𝐮𝐬𝐡】Our BR151 robot vacuum side brushes are marked with "L" or "R" for easy identification, making replacement simple while ensuring efficient performance comparable to the original brushes. To maintain your robot vacuum cleaner at peak performance, we recommend replacing the brushes based on frequency of use
- 【𝐋𝐨𝐧𝐠-𝐋𝐚𝐬𝐭𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞】Our BR151 robot vacuum accessories are made from durable materials for easy installation and effective cleaning on all floor types. To maintain optimal performance, we recommend replacing them every 3 months - this extends your device's lifespan and ensures a cleaner home
Clean the dock according to its design
Wipe accessible dust and debris from the dock and its charging surfaces using the method in the manual. Roborock recommends keeping its charging dock in a cool, dry place away from direct sunlight. Do not assume the dock or its parts are safe to rinse: construction and cleaning instructions differ by model.
For example, Roborock describes a detachable, washable base on the Qrevo Slim. That feature applies to that product, not to every robot-vacuum dock. Check the instructions for your dock before removing components or using water. See the Roborock Qrevo Slim product page.
Rank #3
- Compatible Models: These accessories compatible for MAMNV BR151, for ZCWA BR151, for MANVINS G20, for Kilgone G20, for ONSON BR151, for GOOVI BR151, for MANVN BR151, for ZC WAS BR151, for iMartine BR151, for XIEBro Life BR151, for bObsweep Leaf 000-BR-150, for bObsweep Charlotte, for GTTVO BR151,for Tuya BR151 Robot Vacuum and Mop Combo
- Worthwhile Package: Great value br151 robot vacuum replacement parts. The package includes 6 x br151 robot vacuum brushes, 4 x br151 robot vacuum filters, 4 x br151 robot vacuum mop pads, 1 x Cleaning Tools
- Our accessories are designed to enhance cleaning efficiency and fit various models.Made from high-quality materials for durability, they are easy to install. Help your vacuum cleaner maintain peak performance.
- To ensure your vacuum cleaner maintains optimal performance, we recommend replacing the accessories every three months. Regular replacement can extend the device's lifespan, improve cleaning efficiency, and keep your home environment cleaner.
- Long-Lasting Performance: High-quality replacement parts help your vacuum perform like new, reducing wear and the need for frequent replacements. Designed to deliver thorough cleaning on all floor types, helping you save money while keeping your home fresh and tidy.
How often to clean or replace parts
Use the schedule in your model’s manual or app, including any remaining-part-life indicators. Roborock’s older general guidance gives a weekly upkeep routine for the S5 as an example. Another Roborock maintenance article cites replacing filters every two months and rollers every 6 to 12 months; those are manufacturer recommendations, not universal schedules. Cleaning needs and replacement timing depend on the model and the part’s condition. See Roborock’s general maintenance guidance and its additional maintenance guidance.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Choosing replacement brushes or filters
Replace a brush or filter when the manual, app, or inspection indicates it is due. Before ordering, match the replacement to the robot’s exact model; parts that look similar may not be compatible. Confirm whether a replacement filter is washable from that model’s instructions rather than inferring it from another product’s specifications.
Quick Recap
Best Value
- ※IMPORTANT※ Many models of Shark R101AE Self-empty Base are introduced. There are also several versions of the height of the foam filter. The height of this filter is 3.7 inch, which is the highest of all models at present. It can be used in other low style foam filters.The pre-motor filters compatible with Shark IQ Robot Vacuum RV1001AE UR1005AE Self-Empty Base.
- □Compare to Part # 106KY1000AE.
- □Easy to Replace. Keeping the filters clean in base helps to extend the working life of the motor.
- □Package Details: 4×Foam & Felt Filters.
- □SATISFACTION GUARANTEED: If dissatisfied with the item, just claim a return/refund to get full money back. Order now and buy risk-free.
Rank #4
- The replacement parts filters fit for MAMNV BR150/BR151, for ZCWA BR150/BR151, for GTTVO BR150/BR151, for ONSON BR150/BR151, for MANVN BR151, for ZC WAS BR151, for iMartine BR151, for Kilgone G20, for MANVINS G20 Robot Vacuum.
- This replacement filters can attach 99.97% particles as small as 0.3-micron in size, such as dust, dirt, pet dander, hair and etc.
- To ensure your vacuum cleaner maintains optimal performance, we recommend replacing the filter every 2-3 months. Regular replacement can extend the device's lifespan, improve cleaning efficiency, and keep your home environment cleaner.
- It is easy to be replaced and installed on br151 robot vacuums, Snap into place for quick and effortless routine replacement without tools.
- Package Include: 8 x br151 robot vacuum filters.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problems
