If one AirPod won’t charge, first check its individual battery status, then confirm the case has power and the earbud is seated correctly. Charge both AirPods in the case, clean visible debris safely, and reset only if those checks do not help. If the same AirPod still shows no charge, contact Apple Support for service.
Check whether the AirPod or the case is the problem
Open the case near your paired iPhone or iPad and check the battery display for the left and right AirPods separately. Apple recommends confirming that both are charging in the device’s status display; the case light alone may not identify which earbud is affected. Its color and location vary by case model, but Apple describes green as fully charged and amber as less than one full charge remaining. Apple’s charging guide explains how to check charge status.
As an Amazon Associate I earn from qualifying purchases.
If both earbuds appear low, or the case itself shows little or no charge, start with the case and its power connection. If only one remains low after charging, focus on reseating that AirPod and checking its charging well.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Make sure the case is getting power
AirPods and AirPods Pro charge inside their case with the lid closed. The cable connector and wireless-charging support depend on the exact case model, so identify your case before choosing a cable or placing it on a wireless charger. Apple’s charging troubleshooting guide recommends charging the AirPods and case for at least 15 minutes.
#1 Best Overall
- 【Perfect Replacement】Wireless OLEBAND Charging Replacement Case is designed to charge Airpods 4th Generation and will only work with Airpods 4th Generation. If you lose your original charging case, this is the good choice for you.(Note: Earbuds are not included, only compatible with original headphones.)
- 【Easy to Pair】Just put your airpods 4 earbuds into this replacement OLEBAND charging case,Then long press sync button in the front. Then connect your airpods 4 to you iPhone,It will work
- 【620mAh Built-in battery】Replacement wireless charging case supports airpod 4 charging technology for fast charging in 20 minutes. You can listen to up to 3 hours of music in just 15-20 minutes of charging time. The replacement wireless OLEBAND charging case is perfectly compatible with Airpods 4th headphones. Never worry about your charging case running low again.
- 【Wireless and Type-c Wired Charging】Wireless OLEBAND charging case can be charged wirelessly by a Qi-compatible charging mat.It provides a faster wireless Charge to your device,you can also Charge through Type-c cable.
- 【Great After-sales service】If there is any problem with OLEBAND charging case,Please contact us: find your order in the order history, clicking "View order details" and "Ask Product Question"
- Put both AirPods in the case and close the lid.
- Connect the case to power using a cable compatible with that case.
- Check that the cable is firmly connected to the case and power adapter, and that the adapter is plugged into a working outlet.
- Leave the case charging for at least 15 minutes, then check the battery status for each AirPod again.
If your case supports wireless charging, position it according to Apple’s instructions for that model. If it does not appear to charge, reposition it or try a compatible cable connection.
Reseat the AirPod and inspect the charging well
Take the affected AirPod out, then place both earbuds back in the case. Close the lid and wait 30 seconds before checking on your iPhone or iPad whether each one is charging. This is Apple’s suggested check for a left- or right-side charging problem. Apple’s left or right AirPod troubleshooting covers that status check.
Rank #2
- Only for Air Pods 4th Gen: This Yitonglian charging case ensures a perfect fit for the 4/5th generation earbuds. Please note: It is not compatible with 1st, 2nd, pro or 3rd generation models
- Superior Battery Life & Rapid Charging: Equipped with a 450mAh battery, this Yitonglian air pods 4/5th case fully recharges in just 2.5 hours. It provides up to 3 additional full charges for your earbuds, and can quickly power up your earbuds to 100% in approximately 30 minutes for all-day listening
- Dual Wireless & Wired Charging：This Yitonglian charger case for air pod 4/5 can use the built-in USB-C port for a wired connection or place it on any Qi-certified wireless charger. For added convenience, it's also compatible with watch charger. (Note: earbuds and Type-C charging cable are not included)
- One-Touch Bluetooth Pairing: Effortlessly sync the Yitonglian replacement charging case with your phone. A simple button press activates Bluetooth pairing, allowing your phone to instantly recognize the case and display its battery status
- Clear LED Power Indicator: Stay informed of your power levels at a glance. The intuitive LED indicator light clearly shows the remaining battery capacity of the Yitonglian charging case, so you'll always know when it's time to recharge
If you can see debris in the case’s charging port, Apple says: “Remove any debris from the charging port with a clean, dry, soft-bristled brush.” Use the brush gently to lift away visible debris. Do not put objects into the charging ports, scrape the contacts, use abrasives, or let liquid enter the port. Cleaning may clear an obstruction, but it cannot fix a defective battery or damaged hardware. See Apple’s AirPods cleaning instructions for its safety guidance.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallReset only after the basic checks
If the case has power, the AirPod is seated, and cleaning has not helped, try resetting the AirPods. Resetting returns custom settings to their defaults, and the procedure differs by model. Follow Apple’s model-specific reset instructions rather than applying a sequence intended for a different generation.
Rank #3
- 【Practical Replacement Case】This is a wireless charging case only for AirPod Pro 2nd/1st Gen Type-C port. Provides a great replacement for lost or damaged original charging case. (Compatible with models A2083, A2084, A2931, A2699, A2698, A3047, A3048, A3049; Earphones not included)
- 【Dual Charging Convenience】Enjoy a flexible charging solution for your AirPods Pro 2/1. The charging case compatible with Qi wireless charging mats and also features a USB-C port for a reliable wired charging connection, allowing you to switch between methods seamlessly
- 【One-Step Bluetooth Sync】For first-time pairing, ensure the case and AirPods Pro 2 are charged (recommended above 30%). Hold the sync button until the light flashes white, then select your AirPods in your device's Bluetooth settings. After setup, opening the case typically allows automatic reconnection to your device
- 【High-Capacity & Efficient Charging】This 660mAh wireless case charges in around 2 hours. It is designed to give your AirPods Pro 1st/2nd generation about 3 complete recharges, usually within 25 minutes per charge.This helps maintain steady listening during daily use and travel
- 【Help & Support】If pairing is not successful on the first attempt, please recharge the wireless charging case and earbuds, then repeat the sync process. For any questions regarding product performance, you may reach out to our support team. Note: This charging case is not equipped with Find My or device tracking functions
When to contact Apple Support
If the same AirPod still does not charge after these checks, contact Apple Support or arrange service. Apple says a damaged AirPod may be replaceable, but coverage, service options, and any out-of-warranty charge depend on your device, warranty status, AppleCare+, location, and applicable consumer law. Check directly with Apple for the terms that apply to your model and region.
Quick Recap
Best Value
- Dual Charging Methods: This AirPods 2 charging case supports both wired charging via lightning cable and QI Certified wireless charging. The LED indicator turns red when it needs to be charged and green when fully charged, keeping you informed of the battery status.
- Bluetooth Sync Button for Fast Pairing: Equipped with a Bluetooth pairing sync button, this AirPod 1 charging case ensures easy pairing with your AirPods 1st/2nd generation. Once paired, the case will automatically reconnect when you use it again, offering seamless connectivity.
- Quick & Efficient Charging: Featuring a 450mAh built-in battery, this replacement charging case for AirPods 1st/2nd Gen charges your AirPods in just 20 minutes, offering up to 5 full recharges to keep your AirPods powered throughout the day.
- Portable & Durable Design: This AirPod charging case replacement is lightweight and compact, making it easy to carry. It provides high-quality shell protection to ensure your AirPods 1st generation or AirPods 2nd generation are safe from damage during daily use.
- Comprehensive Compatibility & Support: This AirPods 1/2 charging case replacement is compatible with AirPods 1st/2nd Generation (A1722, A1523, A2031, A2032). Our customer support team is available to assist you with any issues, and please note: the case does not support Find My or magnetic charging.
Rank #4
- Designed as a Premium Replacement for AirPod Pro 2nd & 1st Gen: This airpod charging case made specifically for airpod pro 1st and 2nd generation earbuds. It works flawlessly with one or both earbuds. You can easily turn audio alerts on or off by pressing and holding the button for 5 seconds. Important: This is a charging case only — earbuds are not included.
- Charge with Flexibility – USB-C or Wireless: Whether you prefer a wired connection or cord-free convenience, this case has you covered. Use any Qi-certified wireless charger or plug in via the built-in Type-C port. The smart LED indicator keeps you informed: Red light means 0–10% battery (needs charging), Green means 100% (fully charged).
- Instant Pairing & Auto Reconnect: Setup is simple — just press the sync button to pair, and the case will automatically reconnect to your device every time you open the lid. For first-time use, make sure both the case and earbuds have at least 30% charge, hold the button until the white light flashes, then tap “Connect” on your device.
- Long-Lasting Power in a Compact Design: Powered by a 660mAh battery, this replacement case fully charges in about 3 hours and provides up to 3 full charges for your AirPod Pro earbuds — giving you over 7 hours of total playback. Need a quick boost? Your earbuds can be recharged in just 25 minutes.
- Built to Protect, Easy to Carry: Engineered with multi-layer safety protection, this case delivers reliable everyday performance. Its compact size (2.36 × 0.97 × 1.77 inches) makes it highly portable, and the built-in lanyard hole helps keep it secure. Whether you're looking for a dependable AirPod Pro charging case or a durable airpod case replacement, this is your go-to companion.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
