Yes, Linux can run on a jailbroken PS5. The public ps5-linux project lists support for PS5 Phat and Slim consoles on firmware versions from 3.00 through 7.61, including the July 2026-era 7.60 and 7.61 releases. Firmware 8.00 and newer is currently outside that project’s supported range. This is a repeatable soft-mod boot, not a permanent dual-boot installation, and PC-game compatibility remains dependent on Linux drivers, Proton and each individual title.
Which PS5 firmware versions support Linux?
The ps5-linux project’s current README lists the following supported firmware versions. The list applies to both PS5 Phat and Slim hardware; the project does not present the console revisions as separate firmware-eligibility tiers.
As an Amazon Associate I earn from qualifying purchases.
| Firmware group | Versions listed as supported |
|---|---|
| 3.xx–5.xx | 3.00, 3.10, 3.20, 3.21, 4.00, 4.02, 4.03, 4.50, 4.51, 5.00, 5.02, 5.10, 5.50 |
| 6.xx–7.61 | 6.00, 6.02, 6.50, 7.00, 7.01, 7.20, 7.40, 7.60, 7.61 |
| 8.00 and newer | Not supported by the project’s listed compatibility range |
Because exploit availability is tied to specific vulnerabilities, updating a console can remove eligibility. The support list is therefore a firmware requirement, not a guarantee that every installation path will remain unchanged as Sony updates system software.
How the Linux jailbreak boot works
This method is a soft mod. Linux is loaded only after the console’s exploit and loader sequence has been run; there is no permanent boot menu that survives a normal reboot.
#1 Best Overall
- Model Number CFI-2000
- Includes DualSense Wireless Controller, 1TB SSD, 2 Horizontal Stand Feet, HDMI Cable, AC power cord, USB cable, printed materials, ASTRO’s PLAYROOM (Pre-installed game)
- Vertical Stand sold seperately
- Prepare the Linux image. The project requires a bootable image on a USB drive.
- Use the exploit matching the firmware. For firmware 3.00–5.50, the README documents a fake-DNS and user-manual route using umtx2. For 6.00–7.61, it documents Y2JB followed by a kernel-exploit payload.
- Send the ps5-linux loader payload. This hands control to the Linux environment after the exploit succeeds.
- Power-cycle into Linux. The FAQ states that the exploit must be run again after a reboot if you want to return to Linux.
These procedures are version-sensitive. An exploit page, DNS route or payload that works on one firmware should not be assumed to work on another, and Sony patches can change the practical procedure even when a version remains listed by the project.
What hardware is required?
| Component | Status | What the project specifies |
|---|---|---|
| USB storage | Required | At least 64GB; an external SSD is recommended for better convenience and endurance |
| Keyboard and mouse | Required | USB models are supported, including devices using wireless dongles |
| Internal M.2 SSD | Optional | Can provide dedicated Linux storage if it is compatible with the PS5 |
| USB WLAN adapter | Optional | Useful when the chosen Linux setup needs an external wireless interface |
| Bluetooth dongle | Optional | Available for setups that need Bluetooth connectivity |
The README advertises HDMI output up to 4K at 60 frames per second, audio, USB peripherals, Ethernet and Bluetooth support. It describes the system as an eight-core, 16-thread CPU running at 3.5GHz with a 2.23GHz GPU. Those are the project’s platform specifications, not a promise that every Linux distribution or game will use every feature without driver configuration.
USB drive or M.2 SSD: which storage approach makes sense?
USB storage
A 64GB USB drive is the minimum listed requirement and is the simplest way to meet the boot requirement. An external SSD is the project’s preferred option, especially if you expect to install a desktop environment, updates, emulators or large games. USB storage is removable, so the console can retain its normal internal game-storage arrangement.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Dedicated M.2 storage
A compatible PS5 M.2 SSD can be assigned to Linux, giving the operating system faster, internal storage. The important limitation is exclusivity: the project says an M.2 used for Linux cannot simultaneously be used as PS5 game storage. Choosing this route means giving up that drive’s normal console-game role while Linux is installed on it.
Rank #2
- CPU: x86-64-AMD Ryzen Zen 8 Cores / 16 Threads at 3.5GHz.GPU: AMD Radeon RDNA 2-based graphics engine.
- 16GB GDDR6/256-bit Memory; 825GB SSD Storage Capacity
- Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T), IEEE 802.11 a/b/g/n/ac/ax, Bluetooth 5.1
- HDR technology, 8K output, 4K TV gaming, Up to 120 fps with 120Hz output, Tempest 3D AudioTech
- What's Included: Sony PlayStation 5 Disc Version; Wireless controller; USB cable, HDMI cable, AC power cord. Nogtox PVT HDMI_cable
| Choice | Main advantage | Main trade-off |
|---|---|---|
| USB drive or external SSD | Lowest commitment and removable storage | Performance and capacity depend on the external device and USB connection |
| PS5-compatible M.2 SSD | Dedicated internal Linux storage | The drive is exclusive to Linux, not PS5 game storage |
Can a Linux-enabled PS5 play PC games?
The project README claims that the hardware is capable of running Steam games and emulators. In practice, each title depends on Linux graphics drivers, the game’s compatibility with Proton and its own anti-cheat or launcher requirements. “The PS5 runs PC games” is therefore too broad: Linux can provide a PC-like environment, but compatibility must be checked game by game.
Steam and Proton
Steam games that already work well with the relevant Linux driver stack and Proton version are the most plausible candidates. A title can still fail because of unsupported graphics features, launchers, anti-cheat, controller handling or performance limits. The ps5-linux project does not establish a universal compatibility list.
Prosper and PS5-binary experiments
Prosper is a separate experimental project aimed at running PS5 binaries on Linux, Windows and macOS. Its documentation says it reimplements the PS5 operating system, application binary interface and GPU stack; it is not a conventional CPU emulator and is “not a general-purpose game runner yet.” Its title results remain incomplete, so it should not be treated as a way to install an arbitrary PS5 library on Linux.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsAnyPS5 progress
Tom’s Hardware reported on 10 October 2026 that AnyPS5’s tracker showed all 1,166 of 1,166 tracked AMD RDNA shader instructions recognized. That metric is an implementation milestone, not proof of complete GPU support. The same report listed 2,578 of 3,044 declared system-library functions implemented, or 84.69%, and only one verified playable title. Those figures describe project progress rather than broad PS5-game compatibility on a PC.
Rank #3
- 🚀 CPU: 3.5GHz, 8-core AMD Zen 2
- 🚀 Storage: Custom 825GB SSD
- 🚀 RAM: 16GB GDDR6
- 🚀 GPU: 10.3 teraflop RDNA 2 GPU
Mihawk OS/PP
A Windows Central report dated 10 October 2026 described Mihawk OS/PP, also called PS5 Proton, as an in-development layer for 32-bit and 64-bit Windows games on a jailbroken PS5. The report said broader performance and compatibility were still unknown. Demonstrations should therefore be understood as experimental bring-up, not as a supported Windows-console replacement.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Phat versus Slim, and the practical trade-offs
| Question | What is established |
|---|---|
| Firmware eligibility | The public project lists the same 3.00–7.61 range for PS5 Phat and Slim consoles |
| Linux boot persistence | Neither model receives a permanent dual boot; the exploit must be rerun after reboot |
| Basic peripherals | USB keyboard and mouse are required; dongles are supported |
| Storage choice | USB storage is removable; an M.2 offers internal Linux storage but cannot also store PS5 games |
| Game compatibility | Depends on drivers, Proton and the title; no model-wide compatibility guarantee is stated |
Legal and online-service risks
Sony’s PS5 software licence prohibits unauthorised or modified hardware and software, bypassing PS5 encryption, security or authentication, and downgrading system software. Using a jailbreak can therefore conflict with the licence and may affect access to online services. Before modifying a console, read the current licence for your region and understand that service eligibility is not assured.
The practical answer
If your PS5 is on one of the listed versions through 7.61, a Linux installation is publicly documented for both Phat and Slim systems. Plan on a 64GB-or-larger USB drive, an external SSD if possible, and a USB keyboard and mouse. Add an M.2 only if you accept that it becomes Linux-only storage. Linux can make the console useful as an experimental PC and may run selected Steam games or emulators, but PS5-binary and Windows-game projects are still incomplete, title-specific and unsupported as general-purpose solutions. Consoles on firmware 8.00 or newer are outside the project’s stated range, and every user must weigh the soft-mod workflow against Sony’s licence and possible online-service consequences.
Recommended Free Tools
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
