The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →The HUAWEI × DJI Osmo Pocket 4 can automatically transfer photos and videos to a Huawei phone or tablet, but Huawei’s China product page says the feature requires specific software versions—and the camera firmware needed for it is expected to roll out progressively from mid-October 2026. As of October 3, Huawei has not promised a single release day or said every camera will receive the update at once.
What the mid-October update changes
Huawei advertises an automatic camera-to-phone transfer workflow for the HUAWEI × DJI Osmo Pocket 4. Once paired, photos can transfer after capture and videos after the camera is closed; Huawei also says 4K material can sync to a Huawei phone’s gallery. These are capabilities described by Huawei, not independently tested results. Huawei’s China product page says the required camera firmware is expected to be pushed out progressively from mid-October 2026. That is an expected rollout window, not a guaranteed date for every unit.
The announcement is specifically about Huawei’s China-market collaboration. It does not establish equivalent availability, pricing, software wording or bundle contents in other regions. Huawei’s official HUAWEI × DJI Osmo Pocket 4 product page is the source for the feature and its prerequisites.
Requirements for automatic transfer
Huawei says every condition below must be met:
- A Huawei phone or tablet upgraded to HarmonyOS 7.0.0.107 SP6.
- DJI Mimo app V1.7.0 (14000170).
- Camera firmware V01.04.12.14 or later.
- More than 15% battery remaining on the camera.
- Phone storage above the threshold set on the phone.
Huawei says automatic transfer is supported only on Huawei phones and tablets. Having the camera, app and phone paired does not by itself satisfy the listed version and battery requirements; the camera must also receive the specified firmware.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
How the related Huawei features differ
| Feature | What Huawei says | Key distinction |
|---|---|---|
| Automatic camera-to-phone transfer | Requires HarmonyOS 7.0.0.107 SP6, DJI Mimo V1.7.0 (14000170), camera firmware V01.04.12.14 or later, camera battery above 15%, and phone storage above its preset threshold. | Specific to Huawei phones and tablets, with the camera firmware expected to roll out progressively from mid-October 2026. |
| All-scenario sharing | Huawei lists support on Huawei devices running HarmonyOS 6.1 or later. | This is a separate sharing feature; it does not replace the stricter automatic-transfer requirements. |
| Huawei Cloud upload | Bind Huawei Cloud in DJI Mimo to upload footage manually or automatically. Automatic upload is described while the camera is powered off and charging, with battery above 20% and Wi-Fi connected; uploads use the user’s subscribed cloud storage. | This is an upload-to-cloud workflow, not the same as automatic transfer to the phone gallery. |
| Livestreaming and audio | Huawei advertises use of the camera as a distributed camera with a paired Huawei phone. It also says the full-kit microphone can connect directly to Huawei phones for audio. | Huawei does not state that these features use the automatic-transfer prerequisites. |
What to check before relying on the feature
- Check the phone: confirm it is a Huawei phone or tablet and is running HarmonyOS 7.0.0.107 SP6 for automatic transfer.
- Check DJI Mimo: verify the installed app is V1.7.0 (14000170).
- Check the camera firmware: look for V01.04.12.14 or later. If it is not installed, Huawei’s stated expectation is a progressive rollout beginning in mid-October 2026; the page does not give a universal arrival date.
- Meet the transfer conditions: keep the camera above 15% battery and make sure phone storage exceeds its preset threshold.
DJI’s release-note PDF documents an earlier snapshot dated April 16, 2026: firmware V01.01.32.02 and DJI Mimo V2.8.1. Those earlier versions do not establish whether a particular camera has received Huawei’s later collaboration firmware. DJI Osmo Pocket 4 release notes.
Camera price, kit and advertised specifications
Huawei’s China page lists the camera starting at ¥2,999, while warning that the displayed price is indicative and may differ from the current Huawei Mall listing. Its full kit includes a microphone, gimbal clamp, 1/4-inch threaded handle, wrist strap, carrying bag and USB-C PD fast-charge cable. Check the local listing for current price and exact bundle contents before buying; the China page does not establish regional availability.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Huawei advertises a 1-inch CMOS sensor, built-in 107 GB storage, three-axis mechanical stabilization and a rotating screen. Its listed 4K/240 fps capability applies only in slow-motion mode; 10-bit D-Log applies only in normal video mode. Huawei lists up to 14 stops of dynamic range in normal or D-Log color modes and says slow-motion recording may be lower. The claimed maximum export speed of 800 MB/s is attributed to DJI lab data and requires the supplied USB-C to USB-C PD USB 3.1 cable or another compliant cable; Huawei cautions that actual results vary. These are manufacturer specifications, not independent measurements.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Who should wait for the update?
If automatic gallery transfer is central to your purchase or workflow, treat the camera firmware as a prerequisite that may not be available on day one. A Huawei device on the required HarmonyOS version, the specified DJI Mimo build, adequate camera charge and sufficient phone storage are all needed. If you do not use a Huawei phone or tablet, Huawei says this automatic-transfer feature is not supported on your device. The separate sharing, cloud-upload and livestreaming descriptions should not be read as substitutes for that specific workflow.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteQuick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
