The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →The reliable setup is straightforward: connect the left and right satellites to the matching ports on the subwoofer, wake the system from the right satellite, then select one input. Use USB-C for a computer, 3.5 mm AUX for any device with an analog audio output, or Bluetooth where the source supports Bluetooth speakers. The source LED confirms which connection is active: white for USB, green for AUX, and blue for Bluetooth.
What you need before connecting the Lumina system
The ProMedia 2.1 Lumina has two satellite speakers and a powered subwoofer. The satellites are not interchangeable: each cable must go into the matching left or right socket on the back of the subwoofer. For computer USB audio, use a USB-C cable that carries data, not a charge-only cable. For analog sources, use a 3.5 mm (1/8-inch TRS) stereo cable. Bluetooth requires no audio cable, but the source device must allow the Lumina to be paired as a Bluetooth speaker.
As an Amazon Associate I earn from qualifying purchases.
- Place the subwoofer on a stable surface with room around it and put the satellites on the left and right sides of your listening position.
- Keep the right satellite accessible because its buttons select the input, wake the system, and control power.
- Identify the two subwoofer satellite sockets before plugging anything in: the black socket is left (L), and the blue socket is right (R).
Complete the first-time hardware setup
- Place the subwoofer and both satellites where you want them.
- Plug the satellite marked L into the black L port on the subwoofer.
- Plug the satellite marked R into the blue R port on the subwoofer.
- Connect the subwoofer to power.
- Tap any button on the right satellite to wake and turn on the system.
Klipsch’s setup instruction is to connect each satellite to its corresponding spot on the back of the subwoofer. If the system does not wake, check those two plugs first; a satellite in the wrong port is the most basic wiring error to eliminate.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesTo turn the system off manually, hold the multifunction button on top of the right satellite for five seconds. During normal use, the speakers enter standby after 15 minutes without an audio signal. They normally wake when a signal returns, so a brief pause after playback resumes can be expected.
#1 Best Overall
- Spacious Design: Measuring 21.1" wide and 14.1" deep, our lap desk comfortably fits most laptops up to 15.6". Extra room for accessories ensures convenience.
- Enhanced Functionality: Packed with handy features, including a 5x9" precision tracking mouse pad and a built-in phone slot for seamless work or video calls. Plus, enjoy ergonomic support with the integrated cushioned wrist rest.
- Cool Comfort: Enjoy a stable surface with our lap desk's dual bolster cushion, designed for comfort and airflow, keeping your lap cool during extended use.
- Durable Surface: Work with confidence on our lap desk's solid surface, featuring a sleek black carbon color, ensuring optimal air circulation to prevent your laptop from overheating.
- On-the-Go Convenience: With an integrated handle and lightweight design (2.8 lbs), our lap desk is portable for travel or moving around the house, offering flexibility in any space.
Choose the right input for your device
| Connection | Source LED | What you connect | Best fit | Important condition |
|---|---|---|---|---|
| USB computer audio | White | USB-C cable from the subwoofer to a computer | Windows PC or Mac | Select ProMedia Lumina as the computer’s playback device |
| 3.5 mm AUX | Green | 3.5 mm (1/8-inch TRS) cable from the device’s headphone or line output | Computer, Mac, monitor, or console with an analog output | The source must send audio through that 3.5 mm jack |
| Bluetooth | Blue | Wireless Bluetooth pairing | Bluetooth-enabled computer, phone, tablet, or supported console | The source device must permit Bluetooth speaker audio |
The official setup material gives the connection procedures but does not publish measured latency, frequency-response figures, or a console-by-console compatibility list. Choose based on the outputs your device actually provides and whether you need the headset passthrough.
Set up USB audio on Windows
USB is the direct computer connection. It carries the computer’s audio digitally to the Lumina, and the operating system should expose the speakers as a playback device.
- With the Lumina powered on, connect a data-capable USB-C cable to the USB-C port on the subwoofer and the other end to the PC.
- Tap the right satellite’s utility button until the front source LED is white. White indicates USB computer mode.
- Open Settings > System > Sound in Windows.
- Under the output device list, select ProMedia Lumina.
- Raise the Windows output volume and start playback.
If a particular game or media application has its own output selector, set that selector to the same system output or to ProMedia Lumina. An application can continue sending sound to a previously selected headset, monitor, or internal speakers even after Windows changes its default output.
The Lumina USB instructions do not call for a separate driver download. Start with the operating system’s built-in sound device selection. If the device does not appear, reseat both ends of the cable, confirm that the cable supports data, and cycle the source button back to white.
Rank #2
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Set up USB audio on a Mac
- Connect the subwoofer’s USB-C port to the Mac with a data-capable USB-C cable. If the Mac has only another connector, use an adapter that supports USB data.
- Tap the utility button on the right satellite until the LED is white.
- Open Apple menu > System Settings > Sound.
- In the output list, choose ProMedia Lumina.
- Set the Mac’s output volume to an audible level and play a test sound.
Klipsch’s computer instruction is to select ProMedia Lumina as the audio playback device in the computer’s sound settings. If the Mac shows the device but an application remains silent, check that application’s own audio output and volume controls rather than changing cables first.
Connect a PC, Mac, monitor, or console with 3.5 mm AUX
AUX is the practical choice when the source exposes a headphone or line-level 3.5 mm output. It is also the usual way to feed the Lumina from a monitor or a console that provides an analog jack.
- Plug one end of a 3.5 mm (1/8-inch TRS) stereo cable into the source device’s headphone or line output.
- Plug the other end into the Lumina AUX input.
- Tap the right satellite’s utility button until the LED is green. Green indicates AUX mode.
- Set the source device to use the connected analog output, then raise its volume gradually.
- Play audio and adjust the Lumina volume with the right satellite controls.
On a computer, the analog output may be labeled Headphones, Line out, or a headset jack. On a monitor, it may be labeled Audio out or Headphone out. The key check is that the device is actively routing sound to the jack where the cable is connected.
A console that offers only HDMI or optical audio cannot plug directly into the Lumina AUX input. In that situation, an appropriate audio extractor or DAC may be needed to create a 3.5 mm analog signal. The official Lumina instructions do not specify a particular adapter, so verify the extractor’s input, output, and console support before buying one.
Rank #3
- Note: Not suitable for MacBooks released after 2023 or devices with a protruding front camera; Not applicable to full-screen or notch-style tempered glass screen protectors; Do not use on the rear camera of the phone.
- 💻 Why Do You Need a Webcam Cover Slide? — Safeguard your privacy by covering your webcam with our reliable webcam cover when not in use. Don't let anyone secretly watch you. Stay protected!
- ✅ Thin & Stylish — Enhance your laptop's functionality and aesthetics with our 0.027" ultra-thin webcam covers. Seamlessly close your laptop while adding a touch of sophistication.
- ✅ Fits Most Devices — Compatible with laptops, phones, tablets, desktops! Keep your privacy intact on Ap/ple, Mac/Book, iPh/one, iP/ad, H/P, L/novo, De/ll, Ac/er, As/us, Sa/msung devices.
- ✅ 365 Days Protection — Our upgraded 3.0 adhesive ensures a strong hold that won't damage your equipment. Experience reliable, long-term privacy protection day in and day out.
Pair the Lumina over Bluetooth
- Wake the speakers by tapping a right-satellite button.
- Tap the utility button until the front LED is blue.
- Hold the utility button for one to two seconds to enter Bluetooth pairing mode.
- Open the source device’s Bluetooth settings and choose ProMedia Lumina.
- Start playback after the device reports that it is connected.
The blue source is the Bluetooth input; the short utility-button hold is the pairing action. If the source has previously connected to another speaker or headset, select ProMedia Lumina explicitly in its Bluetooth list before testing audio.
Bluetooth use with a gaming console depends on that console allowing Bluetooth speaker audio. Klipsch documents how to pair the Lumina but does not publish compatibility tables for individual consoles. If a console rejects Bluetooth speakers, use its 3.5 mm analog output or convert HDMI or optical audio to analog with suitable hardware.
Use the Lumina with PS5, Xbox, Switch, and a monitor
When the console or monitor has a 3.5 mm output
Connect the output directly to AUX, select the green source, and set the console or monitor to send sound through that jack. This avoids relying on a console’s Bluetooth policy and requires only the stereo 3.5 mm cable.
When the source has HDMI only
The Lumina does not accept HDMI directly. An HDMI audio extractor with a 3.5 mm analog output, or another suitable DAC path, is required between the source and the speakers. Choose a device whose input matches the console or monitor and whose output is a standard stereo 3.5 mm signal.
Rank #4
- Anti-Slip Surface - Transform your laptop into a mobile workstation with the AboveTEK portable laptop lap desk. The anti-slip surface provides a strong grip for laptops up to 15.6 inches(Diagonal), while the double rubber strip on the bottom ensures a stable display or typing experience on your lap, couch, or bed.
- Retractable Mouse Pad - Retractable laptop mouse pad extends on both directions for the left/right handed with elevation along the edges for stopping mouse from falling off. The size of laptop tray is 14" X 9.7" and the size of mouse pad is 7.4" X 6.1".
- Effective Heat Shield - The effective heat shield made of sturdy and thick material protects your laptop from overheating. Prioritizes your comfort and safety, an ideal lap pad or board for working anywhere.
- EASY to Carry and Store - With an ergonomic and simplistic design, the lap desk is portable to store in a backpack. Only 15" in size, 2.2 lb of weight and with slim 0.6 inch thickness, it is ready to be easily carried around.
- Widely Applicable - The smooth platform accommodates laptops and tablets up to 15.6 inches(Diagonal), making it a versatile accessory and one of the best gifts for mom, dad, students and professionals. Perfect for use as a laptop bed tray or tablet holder anywhere at home, library, or park.
When the source has optical output
Optical audio also needs conversion before it can feed AUX. Use an optical-to-analog DAC that provides a 3.5 mm stereo output, then select green AUX mode on the Lumina.
When you want wireless console audio
Try Bluetooth only if the console explicitly supports Bluetooth audio speakers. Pairing steps on the Lumina remain the same—blue source, one- to two-second utility-button hold, then select ProMedia Lumina—but the console determines whether that connection is allowed.
For PS5, Xbox, and Switch, do not assume that a USB port, HDMI port, or Bluetooth menu guarantees speaker compatibility. Check which audio outputs the particular console configuration exposes, and use AUX when a supported analog output is available.
Free tools Windows power users keep installed
One-click scans. No signup required.
Switch between speakers and a gaming headset
The left satellite has a headset passthrough input. It accepts a headset with a male TRRS 3.5 mm plug, the four-contact connector commonly used for combined headphone and microphone headsets.
Best Value
- Spacious Design: Measuring 21.1" wide and 12" deep, our lap desk comfortably fits most laptops up to 15.6". Extra room for accessories ensures convenience.
- Enhanced Functionality: Packed with handy features, including a 5x9" precision tracking mouse pad and a built-in phone slot for seamless work or video calls. Plus, enjoy laptop support with the integrated device ledge.
- Cool Comfort: Enjoy a stable surface with our lap desk's dual bolster cushion, designed for comfort and airflow, keeping your lap cool during extended use.
- Durable Surface: Work with confidence on our lap desk's solid surface, featuring a blush pink color, ensuring optimal air circulation to prevent your laptop from overheating.
- On-the-Go Convenience: With an integrated handle and lightweight design (2.14 lbs), our lap desk is portable for travel or moving around the house, offering flexibility in any space.
- Insert the headset’s male TRRS 3.5 mm plug into the female AUX connector on the back of the left satellite.
- Press the right satellite’s volume-plus and volume-minus buttons at the same time.
- Watch for a brief purple LED flash, which indicates that audio has been routed to the headset.
- Press both volume buttons together again to return audio to the satellites.
A three-contact stereo plug is not the specified headset connection for this passthrough; use a TRRS headset. If there is no headset audio, fully insert the plug and repeat the two-button toggle.
Understand the buttons and source LEDs
| Action or indication | How to use it | Result |
|---|---|---|
| Wake or power on | Tap any button on the right satellite | The system wakes from standby or turns on |
| Turn off | Hold the top multifunction button on the right satellite for five seconds | The system powers off |
| USB source | Tap the utility button until the LED is white | USB computer mode is selected |
| AUX source | Tap the utility button until the LED is green | 3.5 mm analog mode is selected |
| Bluetooth source | Tap the utility button until the LED is blue | Bluetooth mode is selected |
| Bluetooth pairing | Hold the utility button for one to two seconds while blue | Pairing mode starts |
| Headset output | Press volume + and volume − together | Output toggles; a purple flash confirms headset routing |
Troubleshoot a silent or missing output
No power or no response
- Confirm that the satellite marked L is in the black L port and the satellite marked R is in the blue R port.
- Tap a button on the right satellite rather than waiting for the system to wake automatically.
- If you intentionally powered the system off, hold the top multifunction button for five seconds only to turn it off; use a brief tap to wake it.
The computer does not show ProMedia Lumina
- Reconnect the USB-C cable at both ends and verify that it is data-capable.
- Cycle the source until the LED is white.
- In Windows Sound settings or macOS Sound settings, select ProMedia Lumina as the output device.
- Check the application’s own output selector and volume. The operating system and the application must be sending audio to the same output.
USB is selected but there is no sound
Confirm that the computer volume is raised, the application is not muted, and the LED is white rather than green or blue. If the operating system lists several outputs, reselect ProMedia Lumina and start playback again.
AUX is silent
- Make sure the cable is fully inserted into both the source’s headphone or line output and the Lumina AUX input.
- Tap the utility button until the LED is green.
- Set the source device to output through the connected 3.5 mm jack and raise its volume.
- If the source has only HDMI or optical, use an appropriate audio extractor or DAC; those outputs cannot connect directly to AUX.
Bluetooth will not play
- Select the blue source, then hold the utility button for one to two seconds to start pairing.
- In the source device’s Bluetooth settings, choose ProMedia Lumina rather than merely turning Bluetooth on.
- For consoles, verify that the console permits Bluetooth speaker audio. If it does not, use a supported analog output or an HDMI/optical-to-analog conversion path.
The headset has no audio
- Use a headset with a male TRRS 3.5 mm plug.
- Insert it into the female AUX connector on the back of the left satellite.
- Press volume + and volume − together to toggle output, and look for the purple confirmation flash.
Which connection should you choose?
- Choose USB when you are connecting a Windows PC or Mac and want the computer to recognize the Lumina as a dedicated playback device.
- Choose AUX when the computer, monitor, or console already provides a 3.5 mm analog output, or when you are using an HDMI or optical audio converter.
- Choose Bluetooth when you want a cable-free connection and the source explicitly supports Bluetooth speaker audio.
- Plan around the headset passthrough if you switch frequently between speakers and a gaming headset; the headset must be TRRS and the toggle is performed with both volume buttons.
Once the satellites are in their matching ports and the LED matches the connection you intend to use, most setup problems reduce to selecting the same output in the source device and in the application that is playing audio.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
