To set up a Hatch Restore 3, keep the clock plugged in, install the Hatch Sleep app, connect the device to 2.4 GHz Wi‑Fi with Bluetooth enabled on your phone or tablet, and complete the in-app setup. You can then build separate Unwind, Sleep and Alarm routines, schedule a gradual sunrise, and run the finished bedtime routine from the Restore 3 itself without keeping your phone nearby.
What you need before setup
- A Hatch Restore 3 and its power cable connected to a wall outlet. Hatch says the device should remain plugged in at all times.
- A phone or tablet with Bluetooth enabled.
- A 2.4 GHz Wi‑Fi network. The Restore 3 control guide specifies 2.4 GHz wireless internet for setup.
- The Hatch Sleep app, installed from the Apple App Store or Google Play Store.
No extra accessory, replacement part, consumable or physical media is required by Hatch’s setup instructions. The clock is intended to stay connected to power, so plan its permanent location near an outlet rather than treating it as a portable alarm.
As an Amazon Associate I earn from qualifying purchases.
The app is required for first-time connection and for creating or changing routines and alarms. Once those are saved, the buttons on the Restore 3 handle everyday operation. That division matters if you want to keep your phone out of the bedroom: do the design work in the app, then use the clock’s controls at night and in the morning.
Connect the Restore 3 to the Hatch Sleep app
- Connect the Restore 3 power cable and plug it into an outlet. Leave it connected; the clock is designed to stay powered rather than operate as a portable battery device.
- Install and open Hatch Sleep on your phone or tablet from the Apple App Store or Google Play Store.
- Follow the setup prompts in the app to add the Restore 3. Keep Bluetooth enabled and select a 2.4 GHz Wi‑Fi network when the app asks for wireless access.
- Allow the app to finish pairing and loading the device controls before creating a routine or alarm.
If setup cannot find the clock, first verify that the Restore 3 is powered and still plugged in, that Bluetooth is on, and that the network being selected is 2.4 GHz. A phone connected only to a 5 GHz network may need to switch to the 2.4 GHz band during setup. Complete the on-screen pairing process before troubleshooting routines; an unfinished connection can leave the editor unavailable or prevent saved settings from reaching the clock.
#1 Best Overall
- 𝗖𝗿𝗲𝗮𝘁𝗲 𝗵𝗲𝗮𝗹𝘁𝗵𝘆 𝘀𝗹𝗲𝗲𝗽 𝗵𝗮𝗯𝗶𝘁𝘀: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝟥 𝗂𝗌 𝖽𝖾𝗌𝗂𝗀𝗇𝖾𝖽 𝗍𝗈 𝗁𝖾𝗅𝗉 𝗒𝗈𝗎 𝖻𝗎𝗂𝗅𝖽 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗍𝗁𝖺𝗍 𝗊𝗎𝗂𝖾𝗍𝗌 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝗌𝗅𝖾𝖾𝗉 𝖻𝖾𝗍𝗍𝖾𝗋. 𝖨𝗍𝗌 𝗋𝖾𝗌𝗍𝖿𝗎𝗅 𝖽𝖾𝗌𝗂𝗀𝗇 𝖺𝗇𝖽 𝗈𝗋𝗂𝗀𝗂𝗇𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝗌𝗎𝗉𝗉𝗈𝗋𝗍 𝖺 𝗌𝖼𝗋𝖾𝖾𝗇-𝖿𝗋𝖾𝖾 𝖻𝖾𝖽𝗋𝗈𝗈𝗆 𝖺𝗍 𝗇𝗂𝗀𝗁𝗍.
- 𝗛𝗮𝘁𝗰𝗵+ 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻: 𝖯𝗎𝗋𝖼𝗁𝖺𝗌𝖾 𝗂𝗇𝖼𝗅𝗎𝖽𝖾𝗌 𝟥𝟢-𝖽𝖺𝗒 𝖿𝗋𝖾𝖾 𝗍𝗋𝗂𝖺𝗅 𝗈𝖿 𝖧𝖺𝗍𝖼𝗁+ 𝗉𝗋𝖾𝗆𝗂𝗎𝗆 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝖺𝗇𝖽 𝖿𝖾𝖺𝗍𝗎𝗋𝖾𝗌, 𝖿𝗈𝗋 𝗇𝖾𝗐 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝖻𝖾𝗋𝗌 𝗈𝗇𝗅𝗒. 𝖠𝖿𝗍𝖾𝗋 𝗍𝗋𝗂𝖺𝗅, 𝖧𝖺𝗍𝖼𝗁+ 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝗉𝗍𝗂𝗈𝗇 𝖼𝗈𝗌𝗍𝗌 $𝟧.𝟫𝟫/𝗆𝗈𝗇𝗍𝗁 𝗈𝗋 $𝟧𝟫.𝟫𝟫/𝗒𝖾𝖺𝗋. 𝖢𝖺𝗇𝖼𝖾𝗅 𝖺𝗇𝗒𝗍𝗂𝗆𝖾.
- 𝗨𝗻𝘄𝗶𝗻𝗱 𝗻𝗶𝗴𝗵𝘁𝗹𝘆: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝖿𝖺𝗅𝗅 𝖺𝗌𝗅𝖾𝖾𝗉 𝖾𝖺𝗌𝗂𝖾𝗋 𝖺𝗇𝖽 𝖿𝖺𝗌𝗍𝖾𝗋. 𝖯𝗋𝖾𝗉𝖺𝗋𝖾 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝖿𝗈𝗋 𝗌𝗅𝖾𝖾𝗉 𝖺𝗇𝖽 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺𝗇 𝗈𝗉𝗍𝗂𝗆𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖾𝗇𝗏𝗂𝗋𝗈𝗇𝗆𝖾𝗇𝗍 𝗐𝗂𝗍𝗁 𝖼𝗎𝗌𝗍𝗈𝗆𝗂𝗓𝖺𝖻𝗅𝖾 𝗅𝗂𝗀𝗁𝗍 𝖺𝗇𝖽 𝖺𝗎𝖽𝗂𝗈 𝗉𝖺𝗂𝗋𝗂𝗇𝗀𝗌, 𝗅𝗂𝗄𝖾 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗏𝖾 𝖦𝗈𝗅𝖽 𝖺𝗇𝖽 𝖴𝗇𝖼𝗈𝗇𝗏𝖾𝗇𝗍𝗂𝗈𝗇𝖺𝗅 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗈𝗇𝗌.
- 𝗦𝗹𝗲𝗲𝗽 𝗱𝗲𝗲𝗽𝗹𝘆: 𝖨𝗆𝗉𝗋𝗈𝗏𝖾 𝗌𝗅𝖾𝖾𝗉 𝗊𝗎𝖺𝗅𝗂𝗍𝗒 𝖺𝗇𝖽 𝗍𝗎𝗇𝖾 𝗈𝗎𝗍 𝖽𝗂𝗌𝗋𝗎𝗉𝗍𝗂𝗈𝗇𝗌 𝗐𝗂𝗍𝗁 𝟪𝟢+ 𝗌𝖼𝗂𝖾𝗇𝖼𝖾-𝖻𝖺𝖼𝗄𝖾𝖽 𝗌𝗅𝖾𝖾𝗉 𝗌𝗈𝗎𝗇𝖽𝗌 𝖺𝗇𝖽 𝖺 𝖽𝗂𝗆𝗆𝖺𝖻𝗅𝖾 𝖼𝗅𝗈𝖼𝗄 𝖽𝖾𝗌𝗂𝗀𝗇 𝗍𝗁𝖺𝗍 𝗄𝖾𝖾𝗉𝗌 𝗒𝗈𝗎𝗋 𝗋𝗈𝗈𝗆 𝖽𝖺𝗋𝗄.
- 𝗪𝗮𝗸𝗲 𝗴𝗲𝗻𝘁𝗹𝘆: 𝖠 𝗌𝗎𝗇𝗋𝗂𝗌𝖾 𝖺𝗅𝖺𝗋𝗆 𝖼𝗅𝗈𝖼𝗄 𝗌𝗎𝗉𝗉𝗈𝗋𝗍𝗌 𝗒𝗈𝗎𝗋 𝗇𝖺𝗍𝗎𝗋𝖺𝗅 𝖼𝗂𝗋𝖼𝖺𝖽𝗂𝖺𝗇 𝗋𝗁𝗒𝗍𝗁𝗆 𝖺𝗇𝖽 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝗐𝖺𝗄𝖾 𝗎𝗉 𝗋𝖾𝖿𝗋𝖾𝗌𝗁𝖾𝖽 𝗂𝗇 𝗍𝗁𝖾 𝗆𝗈𝗋𝗇𝗂𝗇𝗀. 𝖭𝗈 𝗆𝗈𝗋𝖾 𝗃𝖺𝗋𝗋𝗂𝗇𝗀 𝖺𝗅𝖺𝗋𝗆𝗌.
Keep the app open while the initial connection completes. Once the device appears in the app, open its home screen and confirm that the Restore 3 is the clock you intend to configure. The setup sequence is the same whether you plan to use only a sunrise alarm, only a bedtime routine, or both.
Build your first bedtime routine
Hatch presents three routine types in the app:
| Routine type | Purpose | Typical content |
|---|---|---|
| Unwind | Helps you settle down before sleep | Sound, light, or a combination |
| Sleep | Runs after you are in bed | Restful sound options and optional light |
| Alarm | Wakes you at a chosen time | Gradual light plus an optional sound |
During the first routine setup, answer the app’s questions about your sleep needs. Review the sleep-style result, then inspect the routine the app suggests. The suggestion is a starting point, not a required schedule; you can change its steps, content and timing before saving.
Think of Unwind and Sleep as two different jobs rather than two mandatory stages. Unwind is the transition from an active evening toward bed. Sleep is for whatever you want to continue after you are lying down. You can create a routine with both, use only Unwind, or use only Sleep. The useful comparison is purpose: choose the category that matches when you want a sound or light step to run.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Add a step to Unwind or Sleep
- Open the Restore 3 in Hatch Sleep and connect to the device.
- Under either Unwind or Sleep, tap Add step.
- Choose the step’s sound, light, or both.
- Set the duration. Preview the step if you want to hear or see it before saving.
- Save the step and repeat the process for any additional stages.
Every step is a small design decision. A sound-only step keeps the room dark; a light-only step gives you a visual transition without audio; using both combines the two. Duration controls how long that stage lasts, so review the sequence as a whole rather than evaluating one step in isolation. Hatch’s guides document these controls but do not identify one universally best sound, light, combination or duration.
After saving, reopen the routine and check the order of its steps. Previewing is useful for catching an unwanted sound, an overly bright light or a duration that does not fit your evening. If you change your mind, edit the existing step instead of adding a second copy with similar settings.
Edit or remove a step
In the routine editor, tap the three-dot control beside the step. From there, change the sound, light and duration, preview the result, and save. This is also where you adjust an existing step rather than creating a duplicate. If a step no longer belongs in the routine, use the same step controls to remove or replace it when that option is shown by the app.
Add a sunset light effect
- Open the step editor and enable the light.
- Tap See More to browse the available light effects.
- Open Sunsets and select an effect.
- Save the step.
A sunset effect is an optional visual transition. You can use it with audio, by itself, or omit light entirely. It belongs to a routine step, so select the step whose timing should contain the effect and verify the saved duration afterward.
Rank #2
- 𝗖𝗿𝗲𝗮𝘁𝗲 𝗵𝗲𝗮𝗹𝘁𝗵𝘆 𝘀𝗹𝗲𝗲𝗽 𝗵𝗮𝗯𝗶𝘁𝘀: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝟥 𝗂𝗌 𝖽𝖾𝗌𝗂𝗀𝗇𝖾𝖽 𝗍𝗈 𝗁𝖾𝗅𝗉 𝗒𝗈𝗎 𝖻𝗎𝗂𝗅𝖽 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗍𝗁𝖺𝗍 𝗊𝗎𝗂𝖾𝗍𝗌 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝗌𝗅𝖾𝖾𝗉 𝖻𝖾𝗍𝗍𝖾𝗋. 𝖨𝗍𝗌 𝗋𝖾𝗌𝗍𝖿𝗎𝗅 𝖽𝖾𝗌𝗂𝗀𝗇 𝖺𝗇𝖽 𝗈𝗋𝗂𝗀𝗂𝗇𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝗌𝗎𝗉𝗉𝗈𝗋𝗍 𝖺 𝗌𝖼𝗋𝖾𝖾𝗇-𝖿𝗋𝖾𝖾 𝖻𝖾𝖽𝗋𝗈𝗈𝗆 𝖺𝗍 𝗇𝗂𝗀𝗁𝗍.
- 𝗛𝗮𝘁𝗰𝗵+ 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻: 𝖯𝗎𝗋𝖼𝗁𝖺𝗌𝖾 𝗂𝗇𝖼𝗅𝗎𝖽𝖾𝗌 𝟥𝟢-𝖽𝖺𝗒 𝖿𝗋𝖾𝖾 𝗍𝗋𝗂𝖺𝗅 𝗈𝖿 𝖧𝖺𝗍𝖼𝗁+ 𝗉𝗋𝖾𝗆𝗂𝗎𝗆 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝖺𝗇𝖽 𝖿𝖾𝖺𝗍𝗎𝗋𝖾𝗌, 𝖿𝗈𝗋 𝗇𝖾𝗐 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝖻𝖾𝗋𝗌 𝗈𝗇𝗅𝗒. 𝖠𝖿𝗍𝖾𝗋 𝗍𝗋𝗂𝖺𝗅, 𝖧𝖺𝗍𝖼𝗁+ 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝗉𝗍𝗂𝗈𝗇 𝖼𝗈𝗌𝗍𝗌 $𝟧.𝟫𝟫/𝗆𝗈𝗇𝗍𝗁 𝗈𝗋 $𝟧𝟫.𝟫𝟫/𝗒𝖾𝖺𝗋. 𝖢𝖺𝗇𝖼𝖾𝗅 𝖺𝗇𝗒𝗍𝗂𝗆𝖾.
- 𝗨𝗻𝘄𝗶𝗻𝗱 𝗻𝗶𝗴𝗵𝘁𝗹𝘆: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝖿𝖺𝗅𝗅 𝖺𝗌𝗅𝖾𝖾𝗉 𝖾𝖺𝗌𝗂𝖾𝗋 𝖺𝗇𝖽 𝖿𝖺𝗌𝗍𝖾𝗋. 𝖯𝗋𝖾𝗉𝖺𝗋𝖾 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝖿𝗈𝗋 𝗌𝗅𝖾𝖾𝗉 𝖺𝗇𝖽 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺𝗇 𝗈𝗉𝗍𝗂𝗆𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖾𝗇𝗏𝗂𝗋𝗈𝗇𝗆𝖾𝗇𝗍 𝗐𝗂𝗍𝗁 𝖼𝗎𝗌𝗍𝗈𝗆𝗂𝗓𝖺𝖻𝗅𝖾 𝗅𝗂𝗀𝗁𝗍 𝖺𝗇𝖽 𝖺𝗎𝖽𝗂𝗈 𝗉𝖺𝗂𝗋𝗂𝗇𝗀𝗌, 𝗅𝗂𝗄𝖾 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗏𝖾 𝖦𝗈𝗅𝖽 𝖺𝗇𝖽 𝖴𝗇𝖼𝗈𝗇𝗏𝖾𝗇𝗍𝗂𝗈𝗇𝖺𝗅 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗈𝗇𝗌.
- 𝗦𝗹𝗲𝗲𝗽 𝗱𝗲𝗲𝗽𝗹𝘆: 𝖨𝗆𝗉𝗋𝗈𝗏𝖾 𝗌𝗅𝖾𝖾𝗉 𝗊𝗎𝖺𝗅𝗂𝗍𝗒 𝖺𝗇𝖽 𝗍𝗎𝗇𝖾 𝗈𝗎𝗍 𝖽𝗂𝗌𝗋𝗎𝗉𝗍𝗂𝗈𝗇𝗌 𝗐𝗂𝗍𝗁 𝟪𝟢+ 𝗌𝖼𝗂𝖾𝗇𝖼𝖾-𝖻𝖺𝖼𝗄𝖾𝖽 𝗌𝗅𝖾𝖾𝗉 𝗌𝗈𝗎𝗇𝖽𝗌 𝖺𝗇𝖽 𝖺 𝖽𝗂𝗆𝗆𝖺𝖻𝗅𝖾 𝖼𝗅𝗈𝖼𝗄 𝖽𝖾𝗌𝗂𝗀𝗇 𝗍𝗁𝖺𝗍 𝗄𝖾𝖾𝗉𝗌 𝗒𝗈𝗎𝗋 𝗋𝗈𝗈𝗆 𝖽𝖺𝗋𝗄.
- 𝗪𝗮𝗸𝗲 𝗴𝗲𝗻𝘁𝗹𝘆: 𝖠 𝗌𝗎𝗇𝗋𝗂𝗌𝖾 𝖺𝗅𝖺𝗋𝗆 𝖼𝗅𝗈𝖼𝗄 𝗌𝗎𝗉𝗉𝗈𝗋𝗍𝗌 𝗒𝗈𝗎𝗋 𝗇𝖺𝗍𝗎𝗋𝖺𝗅 𝖼𝗂𝗋𝖼𝖺𝖽𝗂𝖺𝗇 𝗋𝗁𝗒𝗍𝗁𝗆 𝖺𝗇𝖽 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝗐𝖺𝗄𝖾 𝗎𝗉 𝗋𝖾𝖿𝗋𝖾𝗌𝗁𝖾𝖽 𝗂𝗇 𝗍𝗁𝖾 𝗆𝗈𝗋𝗇𝗂𝗇𝗀. 𝖭𝗈 𝗆𝗈𝗋𝖾 𝗃𝖺𝗋𝗋𝗂𝗇𝗀 𝖺𝗅𝖺𝗋𝗆𝗌.
Run and control the bedtime routine from the clock
After the routine is saved, you can start it without opening the app:
- Press the Big Button to start the bedtime routine.
- Tap the Big Button once to advance to the next step.
- Press and hold the Big Button to stop the routine.
- Rotate the Big Button to change volume.
- Press the Pause button to pause or resume audio.
This is the phone-free part of the Restore 3 experience. Use the app when you need to redesign a routine; use the hardware controls when you are beginning, advancing or stopping the routine at night. A quick test before your first evening can confirm that a short press advances, a long press stops, and rotation changes volume as expected.
Pause affects audio playback, while the Big Button’s start, advance and stop actions control the routine sequence. If a visual light is running and you need to abandon the entire sequence, use the press-and-hold stop action rather than repeatedly tapping through steps.
Set up a gradual sunrise alarm
- Open the Restore 3 home screen in Hatch Sleep.
- Select Add Alarm.
- Enter a name if you want to identify the alarm later.
- Choose the alarm’s start time and the days of the week on which it should repeat.
- Select a sound and light combination. You may switch either the sound or the light off.
- Set the sunrise brightness, sunrise duration and audio volume.
- Save the alarm.
The light begins its gradual sunrise phase before the alarm time. Sound starts when the alarm is due, after that gradual phase. Hatch describes the feature as a custom light-and-sound combination intended to wake you gently; the exact experience depends on the brightness, duration, sound and volume you select. The official Restore 3 Alarm Guide, updated August 2, 2026, uses the same basic description: the feature lets you create a custom light and sound combination for waking.
Recommended Free Tools
Give the alarm a descriptive name if you plan to create more than one schedule. Names make it easier to distinguish a weekday alarm from a one-time appointment when you return to the Restore 3 home screen. Review the time and repeat days before saving; a correct sound or brightness cannot compensate for an incorrect schedule.
Create a one-time alarm
When setting the days, leave every weekday unselected. Hatch says that this creates a one-time alarm: it runs once and then deletes itself. This is useful for a single early appointment or travel day without leaving a repeating alarm active. Because the alarm removes itself after running, do not expect it to remain available as a reusable schedule the following morning.
Choose settings deliberately
| Setting | What it changes | Decision to make |
|---|---|---|
| Repeat days | Which days the alarm runs | Select only the days you need, or select none for a one-time alarm |
| Sunrise duration | How long the light ramps up before the alarm time | Use a shorter or longer ramp according to how much transition you want |
| Brightness | Intensity of the sunrise light | Set the level that is visible in your room without being distracting |
| Sound | Audio that starts at the alarm time | Choose a sound, or disable sound and use light alone |
| Volume | Loudness of the alarm audio | Set a level you can hear without making the wake-up unnecessarily abrupt |
| Light | Whether the gradual sunrise runs | Keep it on for a light-based wake-up, or turn it off for sound-only use |
There is no universally best combination in Hatch’s setup guidance. The controls let you tune the schedule and intensity; they do not establish that one brightness, duration or sound improves sleep for every user. The practical comparison is between the experience you want: light and sound together, light without sound, or sound without light.
Rank #3
- 𝗖𝗿𝗲𝗮𝘁𝗲 𝗵𝗲𝗮𝗹𝘁𝗵𝘆 𝘀𝗹𝗲𝗲𝗽 𝗵𝗮𝗯𝗶𝘁𝘀: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝟥 𝗂𝗌 𝖽𝖾𝗌𝗂𝗀𝗇𝖾𝖽 𝗍𝗈 𝗁𝖾𝗅𝗉 𝗒𝗈𝗎 𝖻𝗎𝗂𝗅𝖽 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗍𝗁𝖺𝗍 𝗊𝗎𝗂𝖾𝗍𝗌 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝗌𝗅𝖾𝖾𝗉 𝖻𝖾𝗍𝗍𝖾𝗋. 𝖨𝗍𝗌 𝗋𝖾𝗌𝗍𝖿𝗎𝗅 𝖽𝖾𝗌𝗂𝗀𝗇 𝖺𝗇𝖽 𝗈𝗋𝗂𝗀𝗂𝗇𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝗌𝗎𝗉𝗉𝗈𝗋𝗍 𝖺 𝗌𝖼𝗋𝖾𝖾𝗇-𝖿𝗋𝖾𝖾 𝖻𝖾𝖽𝗋𝗈𝗈𝗆 𝖺𝗍 𝗇𝗂𝗀𝗁𝗍.
- 𝗛𝗮𝘁𝗰𝗵+ 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻: 𝖯𝗎𝗋𝖼𝗁𝖺𝗌𝖾 𝗂𝗇𝖼𝗅𝗎𝖽𝖾𝗌 𝟥𝟢-𝖽𝖺𝗒 𝖿𝗋𝖾𝖾 𝗍𝗋𝗂𝖺𝗅 𝗈𝖿 𝖧𝖺𝗍𝖼𝗁+ 𝗉𝗋𝖾𝗆𝗂𝗎𝗆 𝖼𝗈𝗇𝗍𝖾𝗇𝗍 𝖺𝗇𝖽 𝖿𝖾𝖺𝗍𝗎𝗋𝖾𝗌, 𝖿𝗈𝗋 𝗇𝖾𝗐 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝖻𝖾𝗋𝗌 𝗈𝗇𝗅𝗒. 𝖠𝖿𝗍𝖾𝗋 𝗍𝗋𝗂𝖺𝗅, 𝖧𝖺𝗍𝖼𝗁+ 𝗌𝗎𝖻𝗌𝖼𝗋𝗂𝗉𝗍𝗂𝗈𝗇 𝖼𝗈𝗌𝗍𝗌 $𝟧.𝟫𝟫/𝗆𝗈𝗇𝗍𝗁 𝗈𝗋 $𝟧𝟫.𝟫𝟫/𝗒𝖾𝖺𝗋. 𝖢𝖺𝗇𝖼𝖾𝗅 𝖺𝗇𝗒𝗍𝗂𝗆𝖾.
- 𝗨𝗻𝘄𝗶𝗻𝗱 𝗻𝗶𝗴𝗵𝘁𝗹𝘆: 𝖱𝖾𝗌𝗍𝗈𝗋𝖾 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗌𝗈 𝗒𝗈𝗎 𝖼𝖺𝗇 𝖿𝖺𝗅𝗅 𝖺𝗌𝗅𝖾𝖾𝗉 𝖾𝖺𝗌𝗂𝖾𝗋 𝖺𝗇𝖽 𝖿𝖺𝗌𝗍𝖾𝗋. 𝖯𝗋𝖾𝗉𝖺𝗋𝖾 𝗒𝗈𝗎𝗋 𝗆𝗂𝗇𝖽 𝖿𝗈𝗋 𝗌𝗅𝖾𝖾𝗉 𝖺𝗇𝖽 𝖼𝗋𝖾𝖺𝗍𝖾 𝖺𝗇 𝗈𝗉𝗍𝗂𝗆𝖺𝗅 𝗌𝗅𝖾𝖾𝗉 𝖾𝗇𝗏𝗂𝗋𝗈𝗇𝗆𝖾𝗇𝗍 𝗐𝗂𝗍𝗁 𝖼𝗎𝗌𝗍𝗈𝗆𝗂𝗓𝖺𝖻𝗅𝖾 𝗅𝗂𝗀𝗁𝗍 𝖺𝗇𝖽 𝖺𝗎𝖽𝗂𝗈 𝗉𝖺𝗂𝗋𝗂𝗇𝗀𝗌, 𝗅𝗂𝗄𝖾 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗏𝖾 𝖦𝗈𝗅𝖽 𝖺𝗇𝖽 𝖴𝗇𝖼𝗈𝗇𝗏𝖾𝗇𝗍𝗂𝗈𝗇𝖺𝗅 𝖬𝖾𝖽𝗂𝗍𝖺𝗍𝗂𝗈𝗇𝗌.
- 𝗦𝗹𝗲𝗲𝗽 𝗱𝗲𝗲𝗽𝗹𝘆: 𝖨𝗆𝗉𝗋𝗈𝗏𝖾 𝗌𝗅𝖾𝖾𝗉 𝗊𝗎𝖺𝗅𝗂𝗍𝗒 𝖺𝗇𝖽 𝗍𝗎𝗇𝖾 𝗈𝗎𝗍 𝖽𝗂𝗌𝗋𝗎𝗉𝗍𝗂𝗈𝗇𝗌 𝗐𝗂𝗍𝗁 𝟪𝟢+ 𝗌𝖼𝗂𝖾𝗇𝖼𝖾-𝖻𝖺𝖼𝗄𝖾𝖽 𝗌𝗅𝖾𝖾𝗉 𝗌𝗈𝗎𝗇𝖽𝗌 𝖺𝗇𝖽 𝖺 𝖽𝗂𝗆𝗆𝖺𝖻𝗅𝖾 𝖼𝗅𝗈𝖼𝗄 𝖽𝖾𝗌𝗂𝗀𝗇 𝗍𝗁𝖺𝗍 𝗄𝖾𝖾𝗉𝗌 𝗒𝗈𝗎𝗋 𝗋𝗈𝗈𝗆 𝖽𝖺𝗋𝗄.
- 𝗪𝗮𝗸𝗲 𝗴𝗲𝗻𝘁𝗹𝘆: 𝖠 𝗌𝗎𝗇𝗋𝗂𝗌𝖾 𝖺𝗅𝖺𝗋𝗆 𝖼𝗅𝗈𝖼𝗄 𝗌𝗎𝗉𝗉𝗈𝗋𝗍𝗌 𝗒𝗈𝗎𝗋 𝗇𝖺𝗍𝗎𝗋𝖺𝗅 𝖼𝗂𝗋𝖼𝖺𝖽𝗂𝖺𝗇 𝗋𝗁𝗒𝗍𝗁𝗆 𝖺𝗇𝖽 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝗐𝖺𝗄𝖾 𝗎𝗉 𝗋𝖾𝖿𝗋𝖾𝗌𝗁𝖾𝖽 𝗂𝗇 𝗍𝗁𝖾 𝗆𝗈𝗋𝗇𝗂𝗇𝗀. 𝖭𝗈 𝗆𝗈𝗋𝖾 𝗃𝖺𝗋𝗋𝗂𝗇𝗀 𝖺𝗅𝖺𝗋𝗆𝗌.
After saving, inspect the alarm entry once more. Confirm that the light setting is not accidentally disabled, that the volume is appropriate, and that the sunrise duration is attached to the intended start time. If you create several alarms, check each one individually rather than assuming that changing one changes all of them.
Use the alarm when it goes off
- Tap the Big Button to snooze for nine minutes.
- Press and hold the Big Button to stop the alarm.
- Use the side alarm toggle to enable or disable all scheduled alarms.
The side toggle is a master control. If you want to disable only one alarm while leaving other schedules active, turn that individual alarm off in the Hatch Sleep app instead of using the hardware toggle. This distinction is a common source of confusion: the side switch does not selectively silence one schedule.
If you snooze, the alarm returns after nine minutes. If you stop it with a press and hold, the current alarm ends. Use the app later if you need to change tomorrow’s schedule, repeat days, light, sound or volume.
Free content, Hatch+ and current pricing
Hatch’s alarm guide identifies free selections, so a subscription is not required to complete the basic setup sequence or create an alarm with the available free options. Additional audio and other content are associated with Hatch+; check the current catalog in the app before assuming a particular sound or light effect is included.
Hatch’s product page currently displays the Restore 3 at $169.99. The displayed price and availability can change. Hatch describes Hatch+ as $5.99 per month or $59.99 per year and says a 30-day free trial comes with Restore; those are vendor terms that may change, so confirm the offer in the app or at checkout before subscribing. You can complete the core connection, routine and alarm steps with the free choices identified by Hatch.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteIf you are evaluating the purchase, the relevant cost is the clock plus any optional Hatch+ subscription, not a required accessory bundle. No separate speaker, lamp, cable, replacement tool or physical book is specified for setup. Product price, subscription pricing, trial availability and content access are time-sensitive vendor details.
What can be done without the phone?
| Task | Restore 3 controls | Hatch Sleep app |
|---|---|---|
| Start the saved bedtime routine | Yes — press the Big Button | Yes |
| Advance to the next routine step | Yes — tap the Big Button | Yes |
| Stop a running routine | Yes — hold the Big Button | Yes |
| Pause or resume audio | Yes — Pause button | Yes |
| Adjust volume during playback | Yes — rotate the Big Button | Yes |
| Snooze or stop a sounding alarm | Yes — tap or hold the Big Button | Yes |
| Create or redesign steps | No | Yes |
| Change schedule, sunrise duration or alarm content | No | Yes |
| Disable one alarm while keeping others | No | Yes |
The practical division is simple: configure in the app, operate the saved routine on the clock. The phone is needed when you add, edit or reschedule content, but the documented start, advance, pause, volume, snooze and stop actions are available on the device itself.
Rank #4
- Gentle Wake Up with Sunrise Alarm Clock: The sunrise simulation gradually brightens over a customizable 5-60 minutes before your set alarm time, aligning with your circadian rhythm for a peaceful, stress-free start to your day.
- Soothing Sound Machine for Better Sleep: Choose from 25 calming sounds, including white/pink/brown/blue noise and natural sounds like waves and rain. Set the sleep timer for a restful slumber.
- Immersive Bluetooth Audio: Stream music, podcasts, or audiobooks via Bluetooth. The 5W stereo speaker delivers clear sound quality, creating an immersive listening experience.
- 0-100% Dimmable Digital Clock & Night Light: Adjust the clock’s display to the perfect brightness with a full-range dimmer. The soft night light features 12 color options including a sunset light, perfect for reading or relaxing before bed.
- Personalize Your Wake-Up Experience: Customize your morning with 7 alarm sounds and adjustable volume. Choose from 3 wake-up modes: gentle light + sound, just the alarm, or sunrise light without sound for a natural wake-up experience.
Troubleshoot the common setup and alarm problems
The app cannot connect to the Restore 3
- Confirm the clock is plugged into power.
- Turn on Bluetooth on the phone or tablet running Hatch Sleep.
- Connect through a 2.4 GHz Wi‑Fi network, as specified by Hatch’s control guide.
- Return to the app’s device setup flow and complete every on-screen step before trying to build a routine.
If your router presents separate network names, choose the one identified as 2.4 GHz. If it presents one combined name, consult the router’s network controls to ensure a 2.4 GHz connection is available during setup. These checks address the requirements Hatch documents; they do not change the device’s need to remain plugged in.
The alarm did not run
- Check that the alarm was saved with the correct start time and repeat days.
- Check the side alarm toggle. If it is off, all scheduled alarms are disabled.
- If only one alarm is missing, open the app and verify that individual alarm is enabled rather than relying on the master toggle.
- For a one-time alarm, remember that Hatch deletes it after its single run; it will not appear as a continuing schedule.
The alarm is too bright or too loud
Open the alarm in Hatch Sleep and adjust brightness, sunrise duration or volume. You can also switch sound or light off independently, allowing a light-only or sound-only wake-up. Save the revised alarm and verify the entry again before relying on it for the next morning.
The routine does not progress as expected
Tap the Big Button to advance manually. If you need to abandon the sequence, hold the Big Button to stop it, then use the app to inspect each step’s duration and saved content. Preview each edited step so you can distinguish a control action from a content or timing choice.
You cannot find a particular sound or effect
Check whether the item is among Hatch’s free selections or associated with Hatch+. The alarm guide identifies free choices, while additional content may require the subscription. Availability and catalog organization can change, so use the current app listing rather than assuming that every item is included.
What is known about Restore sleep outcomes?
Hatch reports results from a biannual Sleep Wellness Impact survey of 1,000 Restore and Restore 2 customers conducted in October 2023: 10% said their sleep had improved, 12% said they enjoyed waking up more, and 11% said they felt better rested. These are vendor-reported survey results, not independent clinical findings. The published information does not provide enough methodology to generalize the percentages to all users or to Restore 3 specifically. They should be treated as product-survey context, not a promise that a particular routine or alarm setting will produce the same result.
Restore 3 setup checklist
- Power cable connected and clock left plugged in.
- Hatch Sleep installed on an Apple or Android device.
- Bluetooth enabled on that device.
- 2.4 GHz Wi‑Fi available for setup.
- Initial pairing completed in the app.
- Unwind and Sleep steps added, edited and saved as needed.
- Sound, light and duration choices previewed where useful.
- Alarm time, repeat days, sunrise duration, brightness, sound and volume reviewed.
- Side alarm toggle checked before bed.
- Big Button controls tested: start, advance, snooze, stop and volume.
Once those checks are complete, the Restore 3 is ready to run the saved bedtime sequence and deliver the scheduled sunrise alarm from its own controls. Revisit the app whenever you want to change the routine, alter an alarm schedule, select different content or disable one alarm without affecting the others.
Free tools Windows power users keep installed
One-click scans. No signup required.
Frequently Asked Questions
Does the Hatch Restore 3 need to stay plugged in?
Yes. Hatch says to keep the Restore 3 plugged in at all times, so place it near a suitable outlet.
Best Value
- 𝖠 𝖽𝗂𝖿𝖿𝖾𝗋𝖾𝗇𝗍 𝗍𝗒𝗉𝖾 𝗈𝖿 𝗌𝗅𝖾𝖾𝗉 𝗍𝗋𝖺𝖼𝗄𝖾𝗋 𝗍𝗁𝖺𝗍’𝗌 𝖽𝖾𝗌𝗂𝗀𝗇𝖾𝖽 𝗍𝗈 𝗀𝖾𝗍 𝗒𝗈𝗎 𝗍𝗈 𝗌𝗅𝖾𝖾𝗉: 𝖧𝖺𝗍𝖼𝗁 𝖲𝗅𝖾𝖾𝗉 𝖢𝗅𝗈𝖼𝗄 𝗆𝖺𝗄𝖾𝗌 𝗒𝗈𝗎𝗋 𝗌𝗅𝖾𝖾𝗉 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝖼𝗈𝗇𝗌𝗂𝗌𝗍𝖾𝗇𝗍 𝖺𝗇𝖽 𝖾𝗇𝗃𝗈𝗒𝖺𝖻𝗅𝖾 𝗐𝗂𝗍𝗁 𝖼𝗈𝗇𝗍𝖺𝖼𝗍𝗅𝖾𝗌𝗌 𝗌𝗅𝖾𝖾𝗉 𝗍𝗋𝖺𝖼𝗄𝗂𝗇𝗀, 𝗉𝖾𝗋𝗌𝗈𝗇𝖺𝗅𝗂𝗓𝖾𝖽 𝗂𝗇𝗌𝗂𝗀𝗁𝗍𝗌, 𝖺𝗇𝖽 𝖼𝗂𝗋𝖼𝖺𝖽𝗂𝖺𝗇-𝖻𝖺𝖼𝗄𝖾𝖽 𝗅𝗂𝗀𝗁𝗍 𝖺𝗇𝖽 𝗌𝗈𝗎𝗇𝖽.
- 𝖳𝗋𝖺𝖼𝗄 𝗒𝗈𝗎𝗋 𝗌𝗅𝖾𝖾𝗉, 𝖾𝖿𝖿𝗈𝗋𝗍𝗅𝖾𝗌𝗌𝗅𝗒: 𝖧𝖺𝗍𝖼𝗁 𝖲𝗅𝖾𝖾𝗉 𝖢𝗅𝗈𝖼𝗄 𝗅𝖾𝖺𝗋𝗇𝗌 𝗁𝗈𝗐 𝗒𝗈𝗎 𝗌𝗅𝖾𝖾𝗉 𝖺𝗇𝖽 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝗌𝗅𝖾𝖾𝗉 𝖻𝖾𝗍𝗍𝖾𝗋 𝖻𝗒 𝗎𝗌𝗂𝗇𝗀 𝗒𝗈𝗎𝗋 𝗌𝗅𝖾𝖾𝗉 𝗉𝖺𝗍𝗍𝖾𝗋𝗇𝗌 𝗍𝗈 𝗌𝗁𝗈𝗐 𝗒𝗈𝗎 𝗐𝗁𝖺𝗍’𝗌 𝗐𝗈𝗋𝗄𝗂𝗇𝗀 𝖺𝗇𝖽 𝗐𝗁𝖺𝗍 𝗍𝗈 𝗍𝗋𝗒 𝗍𝗈𝗇𝗂𝗀𝗁𝗍. 𝖸𝗈𝗎 𝖼𝗁𝗈𝗈𝗌𝖾 𝗐𝗁𝖾𝗇 𝗒𝗈𝗎 𝗐𝖺𝗇𝗍 𝗍𝗈 𝗀𝖾𝗍 𝗂𝗇𝗍𝗈 𝖻𝖾𝖽 𝖺𝗇𝖽 𝗁𝗈𝗐 𝗒𝗈𝗎 𝖿𝖺𝗅𝗅 𝖺𝗌𝗅𝖾𝖾𝗉, 𝖿𝗂𝗇𝖽𝗂𝗇𝗀 𝗐𝗁𝖺𝗍 𝗌𝗅𝖾𝖾𝗉 𝗋𝗈𝗎𝗍𝗂𝗇𝖾 𝗐𝗈r𝗄𝗌 𝖻𝖾𝗌𝗍 𝖿𝗈𝗋 𝗒𝗈𝗎.
- 𝖠𝖼𝖼𝗎𝗋𝖺𝗍𝖾 & 𝗉𝗋𝖾𝖼𝗂𝗌𝖾 𝖽𝖺𝗍𝖺: 𝖲𝖺𝖿𝖾 𝖺𝗇𝖽 𝗌𝖾𝖼𝗎𝗋𝖾 𝗌𝖾𝗇𝗌𝗈𝗋𝗌 𝖽𝖾𝗍𝖾𝖼𝗍 𝗒𝗈𝗎𝗋 𝗆𝗂𝖼𝗋𝗈-𝗆𝗈𝗏𝖾𝗆𝖾𝗇𝗍𝗌 𝖺𝗇𝖽 𝖻𝗋𝖾𝖺𝗍𝗁𝗂𝗇𝗀 𝗉𝖺𝗍𝗍𝖾𝗋𝗇𝗌 𝗐𝗂𝗍𝗁 𝟫𝟩% 𝖺𝖼𝖼𝗎𝗋𝖺𝖼𝗒. 𝖦𝖾𝗍 𝗋𝖾𝗅𝗂𝖺𝖻𝗅𝖾 𝗌𝗅𝖾𝖾𝗉 𝖽𝖺𝗍𝖺 𝖾𝗏𝖾𝗋𝗒 𝗇𝗂𝗀𝗁𝗍, 𝗐𝗂𝗍𝗁𝗈𝗎𝗍 𝖾𝗏𝖾𝗋 𝗉𝗎𝗍𝗍𝗂𝗇𝗀 𝖺𝗇𝗒𝗍𝗁𝗂𝗇𝗀 𝗈𝗇. 𝖭𝗈𝗍𝗁𝗂𝗇𝗀 𝗍𝗈 𝗐𝖾𝖺𝗋, 𝗇𝗈𝗍𝗁𝗂𝗇𝗀 𝗍𝗈 𝖼𝗁𝖺𝗋𝗀𝖾. 𝖨𝗍 𝖺𝗅𝗅 𝗐𝗈𝗋𝗄𝗌 𝖿𝗋𝗈𝗆 𝗒𝗈𝗎𝗋 𝗇𝗂𝗀𝗁𝗍𝗌𝗍𝖺𝗇𝖽.
- 𝖯𝖾𝗋𝗌𝗈𝗇𝖺𝗅𝗂𝗓𝖾𝖽 𝗂𝗇𝗌𝗂𝗀𝗁𝗍𝗌 𝖾𝗏𝖾𝗋𝗒 𝗆𝗈𝗋𝗇𝗂𝗇𝗀: 𝖲𝖾𝖾 𝗁𝗈𝗐 𝗒𝗈𝗎 𝗌𝗅𝖾𝗉𝗍, 𝗅𝖾𝖺𝗋𝗇 𝗐𝗁𝖺𝗍'𝗌 𝗐𝗈𝗋𝗄𝗂𝗇𝗀, 𝖺𝗇𝖽 𝗀𝖾𝗍 𝗉𝖾𝗋𝗌𝗈𝗇𝖺𝗅𝗂𝗓𝖾𝖽 𝗇𝖾𝗑𝗍 𝗌𝗍𝖾𝗉𝗌 𝗍𝖺𝗂𝗅𝗈𝗋𝖾𝖽 𝗍𝗈 𝗒𝗈𝗎𝗋 𝗌𝗅𝖾𝖾𝗉 𝗉𝖺𝗍𝗍𝖾𝗋𝗇𝗌. 𝖭𝗈 𝗃𝗎𝖽𝗀𝗆𝖾𝗇𝗍, 𝗇𝗈 𝗌𝗅𝖾𝖾𝗉 𝗌𝖼𝗈𝗋𝖾 — 𝗃𝗎𝗌𝗍 𝗀𝗎𝗂𝖽𝖺𝗇𝖼𝖾 𝗍𝗁𝖺𝗍 𝗁𝖾𝗅𝗉𝗌 𝗒𝗈𝗎 𝗌𝗅𝖾𝖾𝗉 𝖻𝖾𝗍𝗍𝖾𝗋 𝗈𝗏𝖾𝗋 𝗍𝗂𝗆𝖾.
- 𝖳𝗋𝖺𝗇𝗌𝖿𝗈𝗋𝗆 𝗒𝗈𝗎𝗋 𝗋𝗈𝗈𝗆 𝖿𝗈𝗋 𝗌𝗅𝖾𝖾𝗉: 𝖬𝗈𝗋𝖾 𝗍𝗁𝖺𝗇 𝗃𝗎𝗌𝗍 𝖺 𝗌𝗈𝗎𝗇𝖽 𝗆𝖺𝖼𝗁𝗂𝗇𝖾, 𝖧𝖺𝗍𝖼𝗁 𝖲𝗅𝖾𝖾𝗉 𝖢𝗅𝗈𝖼𝗄 𝗉𝖺𝗂𝗋𝗌 𝖼𝗂𝗋𝖼𝖺𝖽𝗂𝖺𝗇-𝖻𝖺𝖼𝗄𝖾𝖽 𝗅𝗂𝗀𝗁𝗍 𝗐𝗂𝗍𝗁 𝖺𝗇 𝖾𝗏𝖾𝗋𝗀𝗋𝗈𝗐𝗂𝗇𝗀 𝗅𝗂𝖻𝗋𝖺𝗋𝗒 𝗈𝖿 𝗌𝗅𝖾𝖾𝗉 𝗌𝗈𝗎𝗇𝖽𝗌 𝖺𝗇𝖽 𝖺𝗎𝖽𝗂𝗈 𝗍𝗈 𝗍𝗎𝗋𝗇 𝗒𝗈𝗎𝗋 𝖻𝖾𝖽𝗋𝗈𝗈𝗆 𝗂𝗇𝗍𝗈 𝖺 𝗌𝗉𝖺𝖼𝖾 𝖻𝗎𝗂𝗅𝗍 𝖿𝗈𝗋 𝗋𝖾𝗌𝗍. 𝖣𝗒𝗇𝖺𝗆𝗂𝖼 𝖻𝖾𝖽𝗍𝗂𝗆𝖾 𝗋𝖾𝗆𝗂𝗇𝖽𝖾𝗋𝗌 𝖺𝗇𝖽 𝖺 𝗀𝖾𝗇𝗍𝗅𝖾 𝗌𝗎𝗇𝗋𝗂𝗌𝖾 𝖺𝗅𝖺𝗋𝗆 𝖼𝗅𝗈𝖼𝗄 𝗐𝗈𝗋𝗄 𝗐𝗂𝗍𝗁 𝗒𝗈𝗎𝗋 𝗇𝖺𝗍𝗎𝗋𝖺𝗅 𝗋𝗁𝗒𝗍𝗁𝗆, 𝗇𝗈𝗍 𝖺𝗀𝖺𝗂𝗇𝗌𝗍 𝗂𝗍.
What Wi‑Fi and phone requirements apply during setup?
Hatch’s control guide specifies 2.4 GHz Wi‑Fi and a Bluetooth-enabled phone or tablet. Install Hatch Sleep from the Apple App Store or Google Play Store.
Can I run a bedtime routine without my phone nearby?
Yes. After setup, press the Big Button to start the saved routine, tap it to advance, hold it to stop, rotate it for volume, and use Pause to pause or resume audio.
How do I make the sunrise alarm one-time?
When creating the alarm, leave every weekday unselected. Hatch says it will run once and then delete itself.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsCan I turn off just one alarm?
Yes, disable that individual alarm in the Hatch Sleep app. The side alarm toggle is a master control that enables or disables all scheduled alarms.
Is Hatch+ required for a sunrise alarm?
No. Hatch’s alarm guide identifies free selections, so the basic setup and an alarm using available free content do not require Hatch+. Additional content may be associated with the subscription.
How long is the Restore 3 snooze?
Tapping the Big Button while the alarm sounds snoozes it for nine minutes. Press and hold the button to stop it.
What does the sunrise duration control?
It controls how long the light ramps up before the alarm time. Brightness controls intensity, while volume controls the alarm audio loudness; sound and light can each be switched off independently.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →The Bottom Line
Connect the plugged-in Restore 3 through Hatch Sleep using Bluetooth and 2.4 GHz Wi‑Fi, build Unwind, Sleep and Alarm steps in the app, then use the Big Button and other clock controls for nightly operation. A sunrise alarm can use light, sound or both, repeat on selected days, or run once when no weekday is selected. Free content supports the basic setup; Hatch+ is optional and prices or offers can change.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
