To monitor a Hindi relaxation stream in OBS, select your listening device under Settings → Audio, then set the relevant source’s monitoring behavior in Audio Mixer → Edit → Advanced Audio Properties. Listen locally, check that the source is not captured twice, and separately verify what reaches YouTube: hearing audio through OBS monitoring alone does not confirm viewers can hear it.
Set up OBS audio monitoring for your Hindi relaxation stream
Hindi language and relaxation content do not require a special OBS monitoring control. The right setup depends on your operating system, the audio sources in your scene, and the device you want to listen through. Include the actual music, ambience, and any Hindi speech you plan to use when testing so you can judge the routing and balance under representative conditions.
As an Amazon Associate I earn from qualifying purchases.
- Choose the monitoring device. In OBS, open Settings → Audio and select the device you intend to hear audio through. Connect it first if it is not already available. OBS’s Audio Mixer Guide explains that the mixer’s monitor button plays a source through the monitoring device configured in Settings.
- Choose which source to monitor. In the Audio Mixer, open Edit → Advanced Audio Properties. For each source you want to check, select the monitoring behavior appropriate to your setup. Monitor only the sources you need to hear; monitoring is a local listening route, separate from sending audio to the stream.
- Play the source and check the signal. Confirm that the relevant mixer meter moves and that the sound is audible through the selected device. If the sound is too quiet or loud, check the source level first, then the operating-system level and OBS fader as appropriate. Volume behavior can vary by device, so test rather than assume that one control affects every route.
- Check for duplicate capture. OBS warns that echo can occur if the same device is captured as an Audio Input/Output Capture source and is also selected globally in Settings → Audio. If you use a scene-specific device source, disable the matching global device. See OBS’s Audio Sources guidance.
- Record and listen back. Record a representative session and play the file before going live. OBS specifically recommends recording a session as usual and listening back before a broadcast. This can reveal missing, duplicated, or unbalanced audio that a local monitoring check may not catch.
Read the OBS mixer meters without treating them as a loudness guarantee
OBS describes green as a typical range for background music and sound effects, yellow for speech, and red as close to clipping. These are qualitative cues, not a guarantee of how loud the audio will sound to viewers. OBS notes that sounds that appear to have similar meter levels may still sound louder to an audience. Listen to the recording as well as watching the meter.
Recommended Free Tools
The OBS Mixer Guide says the meter’s top dot retains the loudest reading over 20 seconds. Use the meter to spot signal and potential clipping while you test, not as a substitute for listening to the actual mix.
#1 Best Overall
- [XLR Mic Input] One XLR microphone input interface is set on the gaming audio mixer, which is great to up your audio quality with your XLR setup. The XLR mixer is a stepping stone to upgrade your live streaming. Audio mixer offered built-in 48V phantom power which opens up more choices for mics. Directly use it with your condenser microphone but do not solve added peripherals. (NOT available for USB mic)
- [Individual Channel Control] Gaming audio mixer for one mic recording with smooth volume slider fader take your streaming recording to a whole new level with full pleasure. Four independent channels set on the DJ mixer give audio volume of the MICROPHONE, LINE IN, HEADPHONE, and LINE OUT channels individual control. Configurable on the PC audio mixer instead of just operating on your game or streaming software.
- [Mute and Monitor] The front mute and monitor buttons but not at the back, make it easier to get the audio interface use. Ability to mute audio, the audio mixer for streaming prevents background noise from damaging your live broadcast. Real-time feedback between speaking and hearing will not distract your attention, which encourage you to speak more confidently. The sturdy-built control button allow you to operate freely and easily during live streaming.
- [Sound Effects] The computer sound mixer supports four pre-recorded customized button that can be recorded and activated at the press of button to post production. 6 kinds of voice changing modes change your output style. 12 auto tune changes the tone of your voice. The podcast mixer being able to add different and fun effects is a huge bonus for your streaming or game voice.
- [Controllable Vibrant RGB] RGB button on the audio mixer DJ meets different live streaming themes. Lights on the video mixer is vibrant but not harsh on your eyes. Flowing or frozen RGB color rotation in a decent pace presents a greatly strong impression as a "light show" to your audience. Even a streaming equipment accessory will not be dull looking when video production.
Use YouTube’s audio settings for the delivery format
Monitoring settings govern what you hear locally; encoder settings govern the audio format sent to YouTube. YouTube’s live encoder settings guidance lists AAC or MP3 audio for RTMP/RTMPS and specifies AAC for 5.1 surround support. Its recommended advanced settings are:
| Delivery format | Sample rate | Audio bitrate |
|---|---|---|
| Stereo | 44.1 kHz | 128 kbps |
| 5.1 surround | 48 kHz | 384 kbps |
These are YouTube’s published recommendations retrieved on 2026-10-03; the page does not display a publication date. A typical stereo relaxation stream should use the stereo values unless its actual delivery format is 5.1. They are not Hindi-specific settings.
Rank #2
- Analog mixing and equalization for pure sound
- Direct mixing of PC/gaming sounds into the streaming output
- Ultra-low noise analog mixer for streaming, podcasting and recording
- Stereo USB audio interface to connect your computer or mobile device
Verify the audio viewers receive before going live
Local monitoring proves only that OBS can play a selected source through your configured device. It does not by itself prove that the source is routed into the live output or that YouTube receives it correctly. After checking the local monitor, make a recording and listen to it; when possible, run a pre-live test with audio and video movement similar to the planned broadcast. Check the received audio and YouTube’s stream health during the event. YouTube recommends representative testing and monitoring stream health.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →- Confirm that the intended music, ambience, and speech are present in the recording or test stream.
- Listen for silence, clipping, echo, or an unintended second copy of a source.
- Check the YouTube stream’s received audio and health separately from OBS’s local monitor.
Troubleshooting OBS monitoring problems
The meter moves, but you hear nothing
Check that the intended device is selected in Settings → Audio, is connected and available to the operating system, and is the device you are actually listening through. In Edit → Advanced Audio Properties, confirm that the source’s monitoring behavior is enabled as intended. Test the device and system volume because their behavior can vary by device.
Rank #3
- Compact, feature-rich livestreaming USB audio mixer provides high-quality sound for desktop audio production
- Plug-and-play connectivity to computer or mobile device (no special drivers required)
- Loopback function makes it easy to mix mic and instrument inputs with background music, game sounds, or other audio input from a computer – and send the stereo mix back to the computer for streaming
- High-performance A/D converter with resolution up to 24-bit/192 kHz provides crystal-clear output for voice and instruments
- Equipped with a single mic input (XLR or ¼"), two LINE inputs for guitar and keyboard, and USB-C input for connecting to a computer
You hear an echo or doubled audio
Look for the same device being captured both globally in Settings → Audio and as an Audio Input/Output Capture source in a scene. OBS identifies this overlap as a possible cause of echo. Disable the duplicate route and test again.
You hear the audio locally, but it is missing from the stream
Monitoring is not proof of stream routing. Record and listen back, then make a representative pre-live test and verify the audio received by YouTube. Check that the intended source is included in the stream output, rather than relying on what you hear through the monitoring device.
Rank #4
- Pro performance with great pre-amps - Achieve a brighter recording thanks to the high performing mic pre-amps of the Scarlett 3rd Gen. A switchable Air mode will add extra clarity to your acoustic instruments when recording with your Solo 3rd Gen
- Get the perfect guitar and vocal take with - With two high-headroom instrument inputs to plug in your guitar or bass so that they shine through. Capture your voice and instruments without any unwanted clipping or distortion thanks to our Gain Halos
- Studio quality recording for your music & podcasts - Achieve pro sounding recordings with Scarlett 3rd Gen’s high-performance converters enabling you to record and mix at up to 24-bit/192kHz. Your recordings will retain all of their sonic qualities
- Low-noise for crystal clear listening - 2 low-noise balanced outputs provide clean audio playback with 3rd Gen. Hear all the nuances of your tracks or music from Spotify, Apple & Amazon Music. Plug-in headphones for private listening in high-fidelity
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
The stream sounds louder or harsher than the meter suggests
Do not use meter color as a delivered-loudness promise. Listen to a representative recording or test stream, adjust the source and OBS levels as needed, and check that the signal is not approaching clipping.
Or let it run in the cloud
If the goal is to keep uploaded relaxation videos playing as a 24/7 YouTube stream, StreamNeo is a cloud option: upload a recording or build a playlist, add your YouTube stream key, and go live. It keeps looping with your computer off, supports the uploaded quality up to 4K 60fps at one price per slot, and automatically recovers if YouTube drops the stream. The first day is free with no card. Monthly pricing is $9.99 per month.
Best Value
- 10 channel mixer with USB and SPX digital effects
- Featuring studio grade discrete class A D PRE amps with inverted Darlington circuit providing fat, natural sounding bass and smooth, soaring highs
- 3 band EQ and high pass filters give you maximum control and eliminate unwanted noise, resulting in a cleaner mix
- 1 knob compressors allow easy control resulting in livelier guitars, punchier bass lines, a tighter snare and a cleaner vocal sound
- MG Series mixers feature a rugged, impact resistant, powder coated metal chassis; Equivalent input noise 128 dBu, residual output noise 102 dBu
StreamNeo is for uploaded videos rather than going live from a camera, and it streams to YouTube only. To try it, start your free day with StreamNeo.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
