Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallYes—you can connect Galaxy Buds2 Pro directly to a Nintendo Switch, Switch Lite, Switch OLED, or Nintendo Switch 2. Pairing uses the console’s built-in Bluetooth Audio menu; the Galaxy Wearable app is not required. The connection carries game sound only: Nintendo does not support Bluetooth microphone input, warns that latency may occur, limits active wireless controllers to two, and can disconnect Bluetooth audio during local wireless communication.
Before you pair
- Charge the Galaxy Buds2 Pro and their case.
- Update the console to its latest available system software. Nintendo recommends updating before pairing.
- Disconnect the earbuds from phones, tablets, computers, and televisions. Temporarily turning Bluetooth off on a nearby phone prevents it from taking the connection.
- Keep no more than two wireless controllers connected while Bluetooth audio is active.
- End any local wireless session before pairing.
Nintendo documents Bluetooth Audio support for the original Nintendo Switch, Switch Lite, and Switch OLED. Nintendo Switch 2 has a separate but similar Bluetooth Audio menu. Nintendo does not publish a model-by-model certification list for Galaxy Buds2 Pro; the earbuds use standard Bluetooth audio pairing.
Put Galaxy Buds2 Pro into pairing mode
Use Samsung’s Buds2 Pro procedure—not the case-button method used by some newer Galaxy Buds models.
- Place both earbuds in their correct slots in the charging case.
- Close the lid, then open it again.
- Leave both earbuds inside the open case.
- Touch and hold both earbuds’ touchpads at the same time for about three seconds.
- Wait for the case lights to flash, indicating pairing mode.
Samsung’s instructions are available at its Buds pairing guide. If the earbuds reconnect immediately to a phone, disconnect them there or switch that phone’s Bluetooth off temporarily.
#1 Best Overall
- Bluetooth 5.4 + Broad Compatibility - Provides Bluetooth 5.4 plus EDR technology and is backward compatible with Bluetooth V5.3/5.0/4.2/4.0/3.0/2.1/2.0/1.1.
- Faster Speed, Extended Range - Get up to 2x faster data transfer and 4x broader coverage compared to Bluetooth 4.0 — perfect for smooth audio streaming and stable connections.
- EDR and BLE Technology - This Bluetooth dongle is quipped with enhanced data rate and Bluetooth low energy, UB500 has greatly improved data transfer speed and operates at the optimal rate of power consumption
- Nano-Sized - A sleek, ultra-small design means you can insert the Nano Bluetooth receiver into any USB port and simply keep it there regardless of whether you are traveling or at home
- Plug & Play with Free Driver Support - Plug and play for Windows 8.1/10/11 (internet required). Supports Win7 (driver required and can be downloaded from website for free). Download the latest driver from TP-Link website to utilize Bluetooth 5.4
Pair with Nintendo Switch, Switch Lite, or Switch OLED
- From the HOME Menu, open System Settings.
- Scroll down and select Bluetooth Audio.
- Select Pair Device.
- Wait several seconds for the console to search.
- Select Galaxy Buds2 Pro when it appears.
- Wait for the connected status, then play a game or system sound.
Nintendo’s complete instructions are at Nintendo Support. Once connected, game audio is routed to the earbuds instead of the console speakers, television, or wired output. Adjust volume both on the console and with the earbuds’ available controls.
Pair with Nintendo Switch 2
- Open System Settings from the HOME Menu.
- Select Bluetooth Audio, then Pair Device.
- With the Buds2 Pro in pairing mode, choose their name.
- Confirm the connected status and test audio.
Switch 2 can save up to 10 Bluetooth audio devices, but only one can be used at a time. Its Bluetooth audio restrictions include a maximum of two connected wireless controllers and disconnection during local wireless communication. See Nintendo’s Switch 2 support page.
Rank #2
- 【Enjoy Wireless Streaming Music】This car Bluetooth adapter can be connected to non-Bluetooth car audio systems, home stereos, speakers, wired headphones via the 3.5mm AUX adapter; And equipped with a Bluetooth 5.0 chip for stable connection / fast transmission / wide signal range. Just pair it with your phone and start listening to your favorite music!
- 【Intelligent Noise Reduction Tech】Our Bluetooth audio receiver adopts the latest CVC8.0 Noise Cancellation and Digital Signal Processor (DSP) technologies, which can eliminate echo and block out intrusive background noise (such as wind, traffic, or crowds), providing you with crystal-clear calling sounds.
- 【Up to 16 Hours of Battery Life】The working time of this aux Bluetooth adapter is up to 16 hours when making calls or playing music. And it takes only 2.5 hours to fully charge the device by using a Type-C fast charging cable (Included in the package). In addition, this Bluetooth music adapter can be used while charging, which is very convenient.
- 【Hands-free Calling & Navigation】A built-in microphone and one “MFB” button to answer / redial / hang up / reject calls, help you make hands-free calls. And the Bluetooth audio adapter supports broadcasting voice notification from existed navigation App. You don’t have to look down the phone on the move. Make sure you drive safely!
- 【Dual Connection】The portable Bluetooth stereo adapter can be paired with 2 devices at the same time. You can enjoy your music and never worry about missing any calls. Once paired, the car receiver will automatically reconnect to your last paired Bluetooth devices, as long as they are within the wireless range.
Reconnect, disconnect, or remove the earbuds
For a saved pair on the original Switch family, open System Settings → Bluetooth Audio, select the saved Buds2 Pro entry, and choose Connect Device. To stop using them, select Disconnect Device. If the saved entry repeatedly fails, choose Remove Device and pair again as a new device. Switch 2 provides the same Bluetooth Audio device-management workflow.
What works—and what does not
| Feature | Direct Bluetooth connection |
|---|---|
| Game and system audio | Yes |
| Galaxy Wearable app on the console | No app is available or required |
| Buds2 Pro microphone for Switch Bluetooth audio | No; Nintendo does not support Bluetooth microphones |
| Voice chat through the Bluetooth microphone | No |
| Latency | Possible; Nintendo warns it varies by Bluetooth device |
| More than two wireless controllers | Not while Bluetooth audio is active |
| Local wireless communication | Bluetooth audio may disconnect |
| Two Bluetooth audio devices at once | No; only one is active |
| Samsung-only features | Not guaranteed; app- and device-dependent |
Samsung confirms that the Buds can play audio over Bluetooth with devices that do not support Galaxy Wearable. However, configure features such as ANC or Ambient Sound on a compatible phone first if you need a particular setting. Do not assume Samsung Seamless Codec, 24-bit audio, 360 Audio, Auto Switch, or every touch-control behavior will operate on the Switch connection. A nearby phone may also reclaim the earbuds automatically.
Recommended Free Tools
Rank #3
- Listen music wireless: Connect with computer speakers, home stereo systems or other speaker systems via the 3.5 mm or RCA cable, then pair with the Bluetooth audio devices such as smartphones or tablet for streaming music.
- Easy setup and automatic reconnect: There is a big bluetooth symbol button in bluetooth receiver middle. Pair your bluetooth device to this adapter with a single button press. Click once means Bluetooth Connect/Disconnect. Hold the botton 3 second mean ON/OFF. It can reconnect automatically with the previously paired device.
- Wireless range: Indoors(without obstacles) connect rang up 30-40 ft (10-12 m).
- Works with most device: Bluetooth enabled device including smartphones, tablets, computers, laptops upon and any powered PC speakers, home stereo systems and A/V receivers.
- NOTE: This adapter doesn't have built-in battery, power by AC to DC power adapter or USB cable. This product is a bluetooth receiver ONLY, not a bluetooth transmitter. Only to give Bluetooth capabilities to an existing stereo / powered speaker / PA. If you have any problems, please contact us at any time by Amazon Order, and we will speed up the process to resolve the issue.
Understand the multiplayer and latency limits
Microphone and voice chat
The Buds2 Pro microphones should not be treated as a Nintendo Switch voice-chat solution. Nintendo explicitly excludes Bluetooth microphone use. Use a supported wired or dedicated gaming setup if voice input is essential.
Wireless controllers
Bluetooth audio leaves room for no more than two wireless controllers. A pair of Joy-Con controllers counts as two, so adding a Pro Controller or another wireless controller can exceed the limit.
Rank #4
- Upgraded Bluetooth 5.3 Adapter: This bluetooth adapter for pc uses the latest upgraded Bluetooth 5.3 BR+EDR technology, greatly improves the stability of the connection data transfer speed, reduces the possibility of signal interruption and power consumption.
- Up to 5 Devices Sync Connected: UGREEN Bluetooth dongle for PC supports up to 5 different types of Bluetooth devices to be connected at the same time without interfering with each other, such as Bluetooth mouse/keyboard/mobile phone/headphones, etc. If Bluetooth audio devices of the same type (such as speakers/headphones) are connected, only one device can play music.
- Plug and Play: The Bluetooth adapter is developed for Windows systems only and does not support other systems. No driver installation is required under Windows 11/10/8.1. NOTE: Win 7, Linux and MacOS System are NOT supported.
- Mini Size: An extremely compact Bluetooth stick that you can leave on your laptop or PC without removing it.The compact size does not interfere with other USB ports. Convenient to carry, no space occupation.
- What Can I do if the Bluetooth adapter can not work?: Ensure there are no other Bluetooth devices installed on the computer. If there are, disable all existing Bluetooth devices in "Device Manager", then insert the adapter and try again. (For detailed information please read the user manual)
Local versus online multiplayer
Nintendo says Bluetooth audio disconnects when local wireless communication begins. That is different from ordinary online multiplayer over Wi-Fi, which is not described by Nintendo as automatically prohibited. Plan on wired audio or another arrangement for local wireless sessions.
Latency
Nintendo warns that Bluetooth audio latency may occur. There is no official universal millisecond figure for Buds2 Pro on Switch. Test a timing-sensitive game; if sound consistently feels late, consider wired audio or a transmitter rather than assuming a different console setting will eliminate the delay.
Best Value
- INSTANT BLUETOOTH ACCESS: Bluetooth dongle adapter receiver for PCs converts non-Bluetooth devices into Bluetooth-capable with simple USB connection
- WIDE COMPATIBILITY: Supports Bluetooth 5.4 and is backwards compatible with Bluetooth 5.3/5.2/5.1/5.0/V4.2/4.0/3.0/2.1/2.0/1.1; ONLY works with Windows 8.1, 10, and 11
- MULTI-DEVICE CONNECTION: Connect up to 6 devices simultaneously; Not compatible with all other operation systems e.g. Mac, Linux, Chrome, Unix, Playstation(PS), Windows 7 and below; Nano bluetooth receiver can be plugged in via any standard USB port
- ENHANCED PERFORMANCE: EDR and BLE technology offers enhanced data rate/transfer speed and low energy consumption
- SYSTEM REQUIREMENTS: Not compatible with all other operation systems e.g. Mac, Linux, Chrome, Unix, Playstation(PS), Windows 7 and below; Disable any built-in Bluetooth of the device before use this product, refer to the user manual for detail
Troubleshoot pairing and sound problems
The Buds2 Pro do not appear
- Reseat both earbuds in the case, close and reopen the lid, and hold both touchpads for about three seconds.
- Turn off Bluetooth on the phone or tablet that normally connects to the Buds.
- Confirm the case and earbuds are charged.
- Restart and update the console.
- Return to System Settings → Bluetooth Audio → Pair Device.
- Move the open case close to the console and reduce obstructions or nearby electronics.
- Disconnect extra wireless controllers so no more than two remain.
These checks follow Nintendo’s Bluetooth pairing troubleshooting.
The earbuds are saved but will not reconnect
- Make sure another nearby device is not connected to the Buds.
- Place the earbuds in the case, reopen it, and restart the console.
- Open System Settings → Bluetooth Audio, select the saved Buds2 Pro entry, and choose Connect Device.
- If it still fails, remove the saved device and pair again.
Nintendo describes this remove-and-repair process in its saved-device support guidance.
Audio comes from the wrong device or there is no sound
- Disconnect the Buds from phones, tablets, and computers.
- Confirm the console lists them as connected, not merely saved.
- Reconnect from the Bluetooth Audio menu.
- Raise volume on both the console and earbuds.
Sound drops out
- Move the earbuds closer and remove practical obstructions.
- Check whether local wireless communication has started.
- Stay within the two-controller limit.
- Restart and update both the console and earbuds.
- Check that a nearby phone has not taken the connection.
Should you use a Bluetooth transmitter?
Try native pairing first: it costs nothing and is sufficient for solo game audio when the latency and controller limits are acceptable. A USB-C transmitter is reasonable when direct pairing is unreliable, delay is distracting, or you want one accessory for several consoles. It cannot guarantee zero latency, restore Nintendo Bluetooth microphone support, or make every Samsung feature available.
Example: Creative BT-W6
Creative lists the BT-W6 as supporting Nintendo Switch and Switch 2, USB-C handheld use, Bluetooth 5.4, Classic Bluetooth, and LE Audio. Its official page lists Switch OS 5.0 or later and Switch 2 OS 20.2.0 or later for the stated platform support. The exact BT-W6-to-Galaxy-Buds2-Pro combination is not established on Creative’s product page, so verify compatibility before buying. It adds another device to charge, may require checking the correct Bluetooth mode, and a USB-A-to-C adapter is not included according to the specifications. Current price and stock are time-sensitive; check Creative’s official product page before purchase. Pairing controls and mode switching are documented at Creative Support.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →When wired or dedicated gaming audio is better
- Wired earbuds or headphones: choose these for the most predictable timing, no pairing, and long sessions without Bluetooth battery management.
- Dedicated gaming headset: choose one when a microphone, regular voice chat, or gaming-focused low-latency behavior matters more than pocketability.
Neither option is required for ordinary Switch game audio if the direct Buds2 Pro connection works acceptably.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
