The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →The correct PS4 connection depends on your Turtle Beach model and your console. Stealth 600 Gen 2 for PlayStation uses a USB mini-transmitter; the original Stealth 700 can use optical plus USB on an original PS4 or PS4 Pro, but uses USB only on PS4 Slim; and Recon 200 Gen 2 plugs into the controller. After connecting the hardware, PS4 audio settings must point to the right input and output device, and the microphone needs its own level check.
Use the model-specific instructions below rather than treating every Turtle Beach headset as interchangeable. The PS4 Slim has no optical output, while the original PS4 and PS4 Pro do, so an optical setup that works on one console may be impossible on another.
As an Amazon Associate I earn from qualifying purchases.
Identify your Turtle Beach model and PS4 first
Look at the label on the headset, transmitter, packaging or quick-start card. “Stealth 600,” “Stealth 700,” and “Recon 200” describe different connection systems, and generations can change the steps. The PlayStation version also matters: a similarly named Xbox headset may not use the same transmitter or console settings.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →| Representative model | Connection to PS4 | Optical cable needed? | PS4 headphone-routing setting in the cited guide |
|---|---|---|---|
| Stealth 600 Gen 2 for PlayStation | USB mini-transmitter | No | All Audio |
| Original Stealth 700 for PS4/PS4 Pro on original PS4 or Pro | USB plus optical | Yes, for the optical setup | Chat Audio |
| Original Stealth 700 on PS4 Slim | USB | No | All Audio |
| Recon 200 Gen 2 for PlayStation | 3.5 mm connection through the DualShock 4 controller | No | Controller Headset |
These are representative configurations documented by the manufacturer, not a compatibility list for every Turtle Beach generation. Check the exact model guide if your headset is not one of these. The official setup pages are the Stealth 600 Gen 2 PS guide, original Stealth 700 guide and Recon 200 Gen 2 PlayStation setup.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Know which PS4 has an optical output
| Console | Optical output | What that means for the original Stealth 700 |
|---|---|---|
| Original PS4, released in 2013 | Yes | Can follow the optical-plus-USB setup. |
| PS4 Slim, released in September 2016 | No | Use the USB-only instructions; optical-dependent features and controls may differ. |
| PS4 Pro | Yes | Can follow the optical-plus-USB setup. |
Turtle Beach documents these console differences in its Stealth 700 feature-set comparison. Do not force an optical cable into a Slim or assume that the Slim offers the same independent game/chat behavior as an optical installation.
Connect a Stealth 600 Gen 2 for PlayStation
The Stealth 600 Gen 2 uses a small USB transmitter. The headset and transmitter are paired out of the box, so normal setup does not require a manual pairing operation.
- Turn on the PS4 and plug the headset’s mini-transmitter into an available USB port on the console.
- Power on the headset. Keep it close to the transmitter while it starts.
- On the PS4 home screen, open Settings > Devices > Audio Devices.
- Set Input Device to Stealth 600 Gen 2.
- Set Output Device to Stealth 600 Gen 2.
- Set Output to Headphones to All Audio so game sound, chat and other PS4 audio are sent to the headset.
- Use the headphone-volume control, then choose Adjust Microphone Level and speak at your normal volume. Move the level until your voice is clear without constantly hitting the upper end of the meter.
The exact labels and sequence are shown in Turtle Beach’s Stealth 600 Gen 2 quick-start guide. A transmitter that double-blinks is not yet showing a completed wireless link. Connect it to the PS4, power on the headset and wait for the transmitter and headset indicators to become solid, as described in the Stealth 600 Gen 2 pairing procedure.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
If the Stealth 600 does not pair
- Turn the headset off.
- Leave the transmitter connected directly to the PS4 rather than to an unpowered hub.
- Power the headset back on and observe the transmitter. Double-blinking means it is still searching; solid indicators mean pairing has completed.
- Once the indicators are solid, return to Settings > Devices > Audio Devices and reselect the Stealth 600 for both input and output.
If the headset connects but the microphone remains silent, open Adjust Microphone Level and watch the meter while speaking. A moving meter confirms that PS4 is receiving the microphone; no movement points to the input selection, mute state or a pairing/power problem.
Set up the original Stealth 700 on an original PS4 or PS4 Pro
On an original PS4 or PS4 Pro, the original Stealth 700 guide uses both the console’s optical output and a USB connection. The optical path carries the game audio format while USB handles the headset’s console connection and chat functions.
- Connect the headset’s USB cable or USB transmitter as specified by the headset guide.
- Connect an optical cable from the PS4’s DIGITAL OUT (OPTICAL) port to the headset base or optical input used by your Stealth 700 setup.
- Open Settings > Devices > Audio Devices and choose the Turtle Beach USB headset for both Input Device and Output Device.
- Set Output to Headphones to Chat Audio, matching the optical configuration in Turtle Beach’s instructions.
- Return to the console’s audio-output settings and set Primary Output Port to Digital Out (OPTICAL).
- When the optical format choices appear, select Only Dolby Digital 5.1 ch. Do not select DTS 5.1ch for this setup.
- Set Audio Format (Priority) to Bitstream (Dolby).
- Set the headphone volume and use Adjust Microphone Level to make sure your voice reaches the desired level.
The complete menu path and format choices are in Turtle Beach’s Stealth 700 for PS4/PS4 Pro quick-start guide. The optical instructions only apply when the console actually has an optical port.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Set up the original Stealth 700 on a PS4 Slim
The PS4 Slim has no digital optical output. For that console, the original Stealth 700 instructions use USB only.
- Connect the Stealth 700’s USB connection to the PS4 Slim.
- Power on the headset.
- Open Settings > Devices > Audio Devices.
- Select the Turtle Beach USB headset as both Input Device and Output Device.
- Set Output to Headphones to All Audio.
- Set the headphone volume and run Adjust Microphone Level.
This USB-only arrangement is not identical to the optical installation. Turtle Beach’s feature comparison notes differences such as independent game/chat controls between the console paths. Therefore, a Slim can connect the headset, but you should not promise that every feature behaves exactly as it does on an original PS4 or Pro. See the official feature-set explanation before changing consoles or buying an adapter.
Using a television’s optical output with a Slim
A television can sometimes provide an optical workaround for a Slim, but it is conditional. The TV must have an optical output and audio settings that pass a compatible signal. Television models differ, so Turtle Beach does not treat this as a universal solution. Its TV optical instructions explain the requirements and limitations.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Turtle Beach also describes an HD Audio Converter route for setups that specifically need optical audio. That converter cannot pass 4K, 3D or HDR video, so it is unsuitable if your video chain depends on any of those formats. Treat it as a conditional accessory, not a requirement for every PS4 Slim owner.
Connect a Recon 200 Gen 2 through the controller
The Recon 200 Gen 2 PlayStation setup is wired: the headset connects to the DualShock 4 controller, and the PS4 routes sound and chat through that controller connection.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11- Plug the Recon 200 Gen 2’s 3.5 mm cable fully into the headset and the DualShock 4 controller.
- On the PS4, open Settings > Sound > Audio Output > Output Device.
- Select Controller Headset.
- Open Settings > Sound > Volume > Headphones and set the listening level.
- Open Settings > Sound > Microphone > Adjust Mic Level and speak while watching the meter.
Those labels come from Turtle Beach’s Recon 200 Gen 2 PlayStation setup guide. If the PS4 does not show Controller Headset, unplug and firmly reconnect the 3.5 mm plug, then revisit the Output Device menu.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Understand the PS4 audio settings
Input Device
Input Device determines which microphone the console uses. Select the named Turtle Beach USB device for wireless models, or Controller Headset for a wired controller connection. Selecting the wrong input can leave game audio working while party chat cannot hear you.
Output Device
Output Device determines where PS4 audio is sent. A wireless headset normally appears by its model name. A wired headset connected to the controller appears as Controller Headset. If the console has reverted to TV or another device, change this setting before troubleshooting the headset itself.
Output to Headphones
All Audio routes game sound and chat to the headset and is used by the cited USB-only Stealth 600 and Stealth 700 Slim setups. Chat Audio routes chat to the headset while the optical path handles the other audio in the original Stealth 700 configuration. Choose the option that matches your model’s connection guide; the labels are not interchangeable recommendations.
Adjust Microphone Level
The microphone-level screen is a diagnostic as well as a volume control. Speak normally and watch the input bar. If it moves, the PS4 has detected the microphone and you can refine the level. If it stays still, check mute controls, the selected input device, cable or transmitter connection, and headset power before raising the level.
Troubleshoot in the order the failure occurs
No wireless connection or a blinking transmitter
- Confirm that the correct PlayStation transmitter is connected directly to a working PS4 USB port.
- Power on the headset after connecting the transmitter.
- For Stealth 600 Gen 2, double-blinking indicates that pairing has not completed. Follow the pairing procedure and wait for solid indicators.
- Move the headset close to the transmitter during pairing and remove unnecessary USB devices temporarily if the console is not detecting it.
The headset appears, but there is no game audio
- Open the audio-device menu and verify both Input Device and Output Device.
- Check Output to Headphones. All Audio is required for the cited USB-only configurations; Chat Audio belongs to the original Stealth 700 optical setup.
- Raise the headset’s physical volume control and the PS4 headphone volume.
- If you are using an original Stealth 700, verify the optical cable is in the console’s optical port and that Primary Output Port is Digital Out (OPTICAL).
Friends cannot hear the microphone
- Confirm that the input device is the Turtle Beach USB headset or Controller Headset, depending on the model.
- Open Adjust Microphone Level and speak. A stationary meter means the console is not receiving the mic signal.
- Check the headset’s mute position and, for a wired model, reseat the 3.5 mm plug at both ends.
- For Stealth 600 Gen 2, power-cycle the headset and transmitter, then repeat the pairing check if the microphone still does not register. Turtle Beach includes this type of power-cycle troubleshooting in its pairing guidance.
Optical settings or features do not match the instructions
Identify the console again. A Slim lacks the optical port, so an original-PS4 optical procedure cannot work as written. On a Slim, use the USB-only Stealth 700 path or a television/converter arrangement only if the TV and video requirements are acceptable. On an original PS4 or Pro, check that Dolby Digital 5.1 only, not DTS 5.1ch, is selected for the cited optical setup.
Choose the connection path that fits your setup
| Priority | Most suitable documented path | Trade-off to expect |
|---|---|---|
| Wireless use with a simple USB installation | Stealth 600 Gen 2 for PlayStation | Requires its USB transmitter and correct pairing. |
| Optical audio on an original PS4 or PS4 Pro | Original Stealth 700 optical plus USB | More cables and several audio-format settings; the path is unavailable on Slim. |
| Wireless use on PS4 Slim | Original Stealth 700 USB-only setup | Feature behavior, including independent game/chat controls, can differ from optical operation. |
| Lowest connection complexity and no wireless pairing | Recon 200 Gen 2 through the controller | The cable must remain connected to the DualShock 4. |
Before purchasing a replacement or accessory, confirm the exact model name, PlayStation variant and PS4 revision. Turtle Beach’s older compatibility guidance also warns that headset behavior can vary among the slimmer 2016 PS4, the original console and PS4 Pro; its compatibility note is useful when an older headset is involved.
Quick Recap
Final connection checklist
- Model and generation identified, including the PlayStation version.
- Console identified as original PS4, PS4 Slim or PS4 Pro.
- USB transmitter, optical cable or controller cable connected according to that model’s path.
- Correct Input Device selected.
- Correct Output Device selected.
- Output to Headphones set to All Audio or Chat Audio as required by the setup.
- Optical users selected Digital Out (OPTICAL), Only Dolby Digital 5.1 ch and Bitstream (Dolby).
- Headphone volume set and microphone level tested with the PS4 meter.
- Wireless users waited for solid pairing indicators before testing chat.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
