Short answer: Samsung’s stock Camera app has no documented way to fire the built-in flash while the Galaxy S24 Ultra is using its 0.6x ultra-wide camera. You can select 0.6x and use the normal flash controls, but Samsung’s manuals do not describe those controls working together. For low light, Samsung documents Night mode, which works without flash. A third-party guide updated August 17, 2026 describes a root-based LSPosed and SCam Unlock modification, but it is an advanced, unverified workaround rather than a normal setting.
Can the Galaxy S24 Ultra use flash at 0.6x?
Not through a documented stock-camera setting. The S24 Ultra Camera app lets you choose the rear ultra-wide view at 0.6x, and it provides flash controls, but Samsung’s user guide treats zoom and flash as separate controls. It does not provide a procedure for combining the flash with the 0.6x view.
As an Amazon Associate I earn from qualifying purchases.
A DroidWin tutorial updated August 17, 2026 reports that Samsung’s stock Camera app does not allow flash with the ultra-wide lens. That is a third-party report, not an official Samsung statement and not a result independently tested for this article. The safest conclusion is therefore precise: there is no documented, supported stock-camera method for ultra-wide flash.
If the flash icon changes, disappears, or returns to an unavailable state after you select 0.6x, that behavior is consistent with the limitation reported by the tutorial. It does not mean that you have missed a hidden “ultra-wide flash” switch.
#1 Best Overall
- 6.8″ Dynamic AMOLED 2X QHD+ display with a 1–120 Hz adaptive refresh rate and up to ~2600 nits peak brightness — delivering a bright, sharp screen with smooth scrolling and great outdoor visibility.
What the camera controls actually do
Selecting the ultra-wide lens
Open Camera and use the rear-camera zoom choices above the shutter. Verizon’s S24-series camera instructions identify 0.6x as the ultra-wide angle. Selecting that value changes the field of view; it does not create a separate flash mode.
Flash choices
Depending on the camera screen and software version, Samsung’s flash control can offer Off, Auto, or On. Samsung support explains these choices generally, but says that available settings vary by model. Verizon lists the same three flash states for the S24 series. Neither source says that selecting On forces the flash to operate with 0.6x.
Consequently, do not promise that setting flash to On will illuminate an ultra-wide photograph. The documented controls establish that flash exists and that 0.6x exists; they do not establish that the two can be paired.
Free tools Windows power users keep installed
One-click scans. No signup required.
Try the supported low-light method: Night mode
For a dark scene, Samsung’s built-in alternative is Night mode. The S24 user guide describes it as: “Night: Use this to take photos in low-light conditions, without using the flash.” That wording matters: Night mode is a computational low-light mode, not a way to make the ultra-wide flash fire.
- Open Camera.
- Swipe the shooting-mode strip to More, then choose Night if it is not already visible.
- Frame the scene with the available rear-camera zoom controls. If 0.6x is offered in Night mode on your software, select it; if it is not offered, use the widest available view.
- Hold the phone steady for the capture period shown on screen. Movement during a longer exposure can soften the result.
- Press the shutter and keep the phone still until processing finishes.
Night mode can brighten a scene without a flash, but it cannot freeze fast movement in the same way a short burst of artificial light might. For people or moving subjects, stabilize the phone, ask the subject to remain still, or add continuous room lighting.
What Night mode can and cannot solve
- It can: provide Samsung’s documented low-light option while avoiding the unavailable flash-and-0.6x combination.
- It cannot: turn the flash back on, guarantee that 0.6x appears in every software version, or reproduce the look of a direct flash.
- It may require a steadier phone: the camera can take longer to capture and process a dark scene, so movement from the phone or subject can reduce sharpness.
If Night mode does not show 0.6x, that is a mode-specific control difference rather than evidence that a flash setting is hidden elsewhere. Use the widest view the mode presents, or return to Photo mode and verify which lens controls are available there.
Stock Camera versus the root-based workaround
| Path | What you can do | Main limitation |
|---|---|---|
| Stock Camera app | Select the 0.6x ultra-wide view, use the ordinary flash menu where it is available, or try Night mode for low light. | No documented stock setting combines 0.6x with the built-in flash. Night mode is explicitly flash-free. |
| Root-based modification | A third-party guide describes using LSPosed and SCam Unlock to alter the stock Camera app. | Requires rooting and additional software. It is not a normal Samsung setting, is not endorsed by Samsung in the cited material, and has not been independently verified here. |
For most owners, the first path is the practical choice. The second is a specialist modification for people who already understand rooted Android and accept the consequences of changing the phone’s software environment.
Rank #2
- 6.8″ Dynamic AMOLED 2X QHD+ display with a 1–120 Hz adaptive refresh rate and up to ~2600 nits peak brightness — delivering a bright, sharp screen with smooth scrolling and great outdoor visibility.
What the reported LSPosed and SCam Unlock method involves
The DroidWin guide describes a workaround based on root access, the LSPosed framework, and an add-on called SCam Unlock for Samsung’s Camera app. This is not a setting that can be enabled from Camera, Settings, or the normal Galaxy Store. It changes how the camera software operates.
The available material does not establish that the modification works on every S24 Ultra firmware, camera build, region, or Android release. It also does not provide an official Samsung guarantee. Treat the guide as an experimental third-party procedure, not as a universal fix.
Before considering it
- Confirm that the 0.6x-plus-flash capability is important enough to justify modifying the operating system.
- Back up photos and other irreplaceable data before making any system change.
- Read the complete, current instructions for your exact S24 Ultra model and firmware; do not assume a guide for another model applies.
- Understand how you would recover if the camera app stops working or the phone no longer behaves normally.
- Plan for the possibility that future updates or a different camera version could change compatibility.
The guide’s own caution is significant: rooting the phone solely for this feature may not be worthwhile. Because this method was not independently tested for this article, there is no responsible basis for promising that it will enable flash at 0.6x on your device.
What not to infer
Installing a root framework does not make rooting necessary for ordinary S24 Ultra photography. The stock Camera app remains the supported way to take regular photographs. Nor does the existence of a modification prove that Samsung officially supports ultra-wide flash; it only shows that a third party reports a possible software alteration.
Step-by-step checks in the stock app
Check whether your camera offers 0.6x in the current mode
- Open Camera and switch to the rear camera.
- Look at the zoom row above the shutter.
- Tap 0.6x for the ultra-wide lens when that option is shown.
- If 0.6x is absent in a particular mode, return to Photo and check again. Samsung does not promise identical controls in every shooting mode.
Check the flash menu without assuming compatibility
- In the rear-camera view, tap the flash icon or expand the camera controls if the icon is hidden.
- Note whether the menu shows Off, Auto, or On.
- Selecting On can test the ordinary flash control, but it is not evidence that the flash will fire at 0.6x.
- Tap 0.6x and observe whether the flash control remains available. If it becomes unavailable, use Night mode or another lighting approach instead of repeatedly changing the same setting.
Check Night mode
- Open the mode strip and choose Night, usually through More.
- Try the widest lens option that the mode presents.
- Keep the phone steady through the capture and compare the result with a regular Photo-mode image.
Record what your phone actually shows
When troubleshooting, note the Android version, camera-app version, shooting mode, selected lens, and whether the flash menu says Off, Auto, On, or is unavailable. Those details are more useful than assuming every S24 Ultra has the same layout. A change after an update can alter labels or placement without adding a documented ultra-wide flash function.
Why the menus may differ on your S24 Ultra
Samsung’s general camera support page says that available settings can vary by model. Samsung Canada’s S24 Ultra support page lists user manuals for Android 14, Android 15, and Android 16, so two S24 Ultra phones can show different wording or mode layouts after software updates or in different regions.
That variation affects where a control appears; it does not create an official ultra-wide flash procedure that the manuals omit. Use the manual matching your Android version and the menus currently shown on your phone. If a newer update changes the camera interface, verify the behavior in the app rather than relying on an older screenshot.
Rank #3
- 6.8″ Dynamic AMOLED 2X QHD+ display with a 1–120 Hz adaptive refresh rate and up to ~2600 nits peak brightness — delivering a bright, sharp screen with smooth scrolling and great outdoor visibility.
Regional and version checks
- Confirm the exact model designation before applying instructions written for another S24-series device.
- Check whether your phone is running Android 14, 15, or 16, since Samsung lists separate manuals for those releases.
- Expect labels, the location of the flash icon, and the modes shown under More to vary.
- Do not interpret a different menu as proof that a hidden flash switch exists; Samsung’s documentation still does not describe pairing flash with 0.6x.
Troubleshooting common expectations
“Flash is set to On, but it does not fire at 0.6x.”
This is the central limitation reported for the stock app. Flash being set to On does not establish that Samsung supports the combination with the ultra-wide lens. Switch to Night mode for a flash-free low-light exposure, or use a different lens and composition.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →“The flash icon disappears when I choose ultra-wide.”
Camera controls can change by lens and mode. The disappearance is consistent with the reported stock-app restriction. Check the rear-camera Photo mode once, then stop searching for a hidden pairing control if 0.6x still removes the flash option.
“The flash icon is present, but the photo is still dark.”
The icon’s presence alone does not document that the flash is firing through the ultra-wide camera. Verify which lens is selected, take a controlled test in Photo mode, and compare it with the same scene using a lens that keeps the flash control. If 0.6x removes or disables flash, Night mode is the supported built-in alternative.
“Night mode did not look like a flash photograph.”
That is expected. Samsung defines Night mode as operating without flash. It brightens the exposure through the camera’s low-light processing rather than illuminating the subject with the phone’s flash.
“0.6x is missing in Night mode.”
Samsung’s controls can differ by shooting mode and software version. Use the widest angle that Night mode offers, then check Photo mode separately. There is no documented step that adds 0.6x flash to Night mode.
Recommended Free Tools
“A tutorial promises the root method, but my phone behaves differently.”
Compatibility is not established across every firmware and region. Confirm the exact Android version, camera app build, device model, and module versions before proceeding. Do not treat a result shown on another phone as a guarantee for yours.
Practical alternatives when you need a wider, brighter shot
Use Night mode at the widest supported setting
This is the only built-in low-light path explicitly documented by Samsung for operation without flash. It is the least disruptive option and keeps the phone within its normal software configuration.
Rank #4
- 6.8″ Dynamic AMOLED 2X QHD+ display with a 1–120 Hz adaptive refresh rate and up to ~2600 nits peak brightness — delivering a bright, sharp screen with smooth scrolling and great outdoor visibility.
Change the composition instead of forcing 0.6x
If the scene is too wide for the main camera, step backward where safe, remove nearby obstructions, or take several overlapping photographs for a later panorama. These approaches do not activate ultra-wide flash, but they avoid modifying the phone.
Add continuous light
A room light or external continuous lamp can brighten a subject while the phone uses 0.6x. This is separate illumination, not a way to enable the S24 Ultra’s built-in flash with the ultra-wide lens. Keep the light positioned to avoid glare and harsh shadows.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesUse a different lens in low light
If flash illumination is more important than the widest field of view, try the rear camera view that retains the flash control, then reframe from a safer distance. The exact lens availability depends on the mode and software version shown by your phone.
About accessories and cost
No verified physical accessory or Samsung setting was established that makes the built-in flash operate with 0.6x. An external continuous light can illuminate a subject, but it does not unlock the phone feature. The only described path specifically aimed at changing this behavior is software-based and root-dependent, so avoid buying an accessory advertised as a guaranteed ultra-wide-flash enabler.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.A sensible decision rule
- Need a normal, supported solution: use 0.6x when available and choose Night mode for dark scenes.
- Need actual flash illumination: use a camera/lens combination in which the stock app keeps the flash control, or add continuous light.
- Considering root only for 0.6x flash: weigh the reported benefit against backup, compatibility, recovery, and software-maintenance work. The third-party author specifically cautions that this may not be worthwhile.
- Seeing different controls after an update: consult the manual for your Android version and treat the current on-screen behavior as authoritative for your device.
Bottom line
You cannot enable the Galaxy S24 Ultra’s built-in flash at the 0.6x ultra-wide setting through a documented Samsung Camera option. Samsung documents flash and zoom separately, and a third-party guide reports that the stock app blocks the combination. Use Night mode for supported low-light ultra-wide photography, remembering that it does not use flash. A root-based LSPosed and SCam Unlock modification is described by that guide, but it is advanced, unendorsed, firmware-dependent, and unverified; it should not be presented as a routine fix.
Frequently Asked Questions
Can I use flash at 0.6x on the Galaxy S24 Ultra?
There is no documented Samsung Camera setting that combines the 0.6x ultra-wide view with the built-in flash. A third-party tutorial reports that the stock app blocks the combination.
Why does flash turn off when I select the ultra-wide camera?
Samsung documents flash and rear-camera zoom separately, and the reported stock-app behavior is that flash is unavailable with the ultra-wide lens. The exact icon behavior can vary by mode and software version.
Best Value
- 6.8″ Dynamic AMOLED 2X QHD+ display with a 1–120 Hz adaptive refresh rate and up to ~2600 nits peak brightness — delivering a bright, sharp screen with smooth scrolling and great outdoor visibility.
Does setting flash to On force it to work at 0.6x?
No. Off, Auto, and On are general flash choices; Samsung and Verizon do not document On as a way to force flash with 0.6x.
Does Night mode use the flash?
No. Samsung’s user guide defines Night mode as taking low-light photos without using the flash. It is a computational low-light option, not a flash workaround.
Is rooting required to take ordinary S24 Ultra photos?
No. Rooting is mentioned only for the advanced third-party LSPosed and SCam Unlock workaround. Normal Camera operation does not require root.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Will the LSPosed and SCam Unlock workaround work on every S24 Ultra?
That is not established. Compatibility can depend on the exact model, Android release, firmware, camera build, region, and module versions, and the method has not been independently verified here.
Can an external light enable the phone’s ultra-wide flash?
No. A room light or continuous lamp can illuminate a subject while you shoot at 0.6x, but it does not activate the S24 Ultra’s built-in flash with that lens.
Why are my menus different from another S24 Ultra?
Samsung says camera settings can vary by model, and S24 Ultra manuals are listed for Android 14, 15, and 16. Regional releases and updates can change labels and menu placement.
The Bottom Line
The stock Galaxy S24 Ultra Camera app has no documented way to fire its flash at 0.6x ultra-wide. Use Night mode without flash, or choose another lighting and lens approach. Root-based LSPosed and SCam Unlock instructions are advanced third-party modifications with unverified, firmware-dependent compatibility.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallQuick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
