Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallThere is no single monthly price: multiply the setup’s average power draw at the wall by 720 hours, divide by 1,000, then multiply by your electricity rate per kilowatt-hour (kWh). In a 30-day month, a continuous 5-watt load uses 3.6 kWh; 10 watts uses 7.2 kWh. Those are example calculations, not measured results for a Raspberry Pi 5 running FFmpeg.
Estimate the monthly electricity cost
Use this formula for a 30-day month:
Monthly electricity cost = average watts ÷ 1,000 × 720 hours × your marginal price per kWh
As an Amazon Associate I earn from qualifying purchases.
For other periods, replace 720 with the actual number of streaming hours. The marginal rate is the per-kWh charge that applies to additional consumption on your bill; taxes, fixed charges and other billing rules may affect the final total.
| Average wall draw | Energy in 30 days at 24 hours/day | Cost calculation |
|---|---|---|
| 5 W | 3.6 kWh | 3.6 × your price per kWh |
| 10 W | 7.2 kWh | 7.2 × your price per kWh |
For a 365-day year, the same continuous loads use 43.8 kWh at 5 W or 87.6 kWh at 10 W. To turn any of these energy amounts into money, use your local electricity rate; without your location and tariff, a currency estimate would be misleading.
#1 Best Overall
- Includes Raspberry Pi 5 with 2.4Ghz 64-bit quad-core CPU (8GB RAM)
- Includes 128GB Micro SD Card pre-loaded with 64-bit Raspberry Pi OS, USB MicroSD Card Reader
- CanaKit Turbine Black Case for the Raspberry Pi 5
- CanaKit Low Noise Bearing System Fan
- Mega Heat Sink - Black Anodized
Why the Pi 5 power-supply rating is not its electricity use
Raspberry Pi recommends a 27 W USB-C power supply for the Pi 5, but that rating is the supply’s capacity, not a claim that the computer continuously draws 27 W. Raspberry Pi’s hardware documentation gives 800 mA as typical active current consumption for the bare board and notes that peripherals change power demand. It also says a 3 A supply limits downstream USB current to 600 mA. See Raspberry Pi’s hardware documentation and setup guidance.
Raspberry Pi’s 2023 launch article says consumption can reach around 12 W under the most intensive, pathological workloads. That is a peak reference for extreme workloads, not an expected average for FFmpeg streaming. The article also describes the optional Active Cooler for uncased operation under continuous heavy load; cooling should be chosen for the workload and setup, not assumed to reduce electricity use. See Raspberry Pi’s Pi 5 launch article.
Rank #2
- Includes Raspberry Pi 5 16GB with 2.4Ghz 64-bit quad-core CPU (16GB RAM)
- Includes 128GB Micro SD Card pre-loaded with 64-bit Raspberry Pi OS, USB MicroSD Card Reader
- CanaKit Turbine Black Case for the Raspberry Pi 5
- CanaKit Low Noise Bearing System Fan
- Mega Heat Sink - Black Anodized
Measure your actual streaming setup
The most useful estimate comes from measuring the complete setup while it is doing the work. A plug-in energy monitor at the wall captures the board, power-supply conversion losses, fan, storage and attached devices together.
Free tools Windows power users keep installed
One-click scans. No signup required.
- Connect the assembled Pi 5 setup through a plug-in energy monitor.
- Run the actual FFmpeg stream, including the resolution, frame rate, encoding workload and peripherals you plan to use.
- Record energy over a representative period. A longer interval is preferable if encoding load or fan activity varies.
- If the monitor reports average watts, multiply by streaming hours and divide by 1,000 to calculate kWh. If it reports accumulated kWh directly, use that reading for the measured interval and scale only when the interval is representative.
- Multiply the resulting kWh by your applicable marginal energy rate.
The 800 mA bare-board typical active-current figure and the around-12 W intensive-workload peak are reference points, not substitutes for measuring your assembled system. Your actual FFmpeg command, storage, cooling and peripherals determine the result.
Rank #3
- CanaKit Raspberry Pi 5 Essentials Starter Kit
Include network costs separately
Resolution and bitrate affect the sustained upload capacity and data transfer needed for a stream; they do not directly determine the Pi’s electricity bill. YouTube’s encoder guidance recommends RTMP or RTMPS, constant bitrate, and a two-second keyframe interval. For 30 fps, it lists 2–6 Mbps for 720p and 4–10 Mbps for 1080p. Check YouTube’s live encoder settings and make sure your connection can sustain the chosen upload rate.
Any data-cap overage or network charge depends on your ISP plan, so check that contract separately from your power bill. No universal data cost follows from the video settings alone.
Rank #4
- All-in-One Complete Kit: This SANOOV RPi 5 bundle comes with Raspberry Pi 5 4GB RAM single board, active cooler, durable ABS case and screwdriver. No extra parts needed, ready to use right out of the box for beginners and hobbyists
- Powerful Single Board Computer: Equipped with 4GB RAM and high-performance processor, delivers fast running speed for 4K playback, AI projects, programming and daily computing tasks. SANOOV for raspberry pi 5 4GB is equipped with broadcom 64 quad-core Arm Cortex A76 processor with gigabit ethernet and upgraded with IEEE 802.11ac Wi-Fi, Bluetooth 5.0 dual-band 2.4Ghz and 5Ghz and Power Over Ethernet (POE). Upgrading delivers 2-3 x speed vs Pi 4, redefining the experience
- Efficient Active Cooler: Effectively lowers operating temperature and prevents performance throttling. Runs quietly even under long-time heavy load, ensures stable operation all day long. SANOOV RPi 5 4GB kit offer an active cooler, which combines an aluminium heatsink with a high-performance PWM fan. Active cooler is fully compatible with the Pi OS, which can effectively reduce the temperature of RPi5 and ensure its good performance during long-term high load operation
- Sturdy ABS Protective Case: Well-fitted for Raspberry Pi 5 board, can be secured with 4 screws to effectively protect the Pi 5 motherboard from damage, reserves full access to all ports and buttons. SANOOV uses ABS material to produce the case, which has a softer texture and feel. Meanwhile, SANOOV case adopts a layered design for easy disassembly and installation. (Tip: The Case cannot install M.2 HAT Add on Board and Solid State Drive!)
- Wide Application & Full Compatibility: Seamlessly compatible with official OS and mainstream peripheral accessories for Raspberry Pi 5. Whether you are a beginner, student, electronics hobbyist or professional developer, this all-in-one kit meets your diverse needs. It excels in IoT projects, robotics design, retro gaming devices, home media servers and other DIY creations. Backed by a large global community, you can easily find guides, technical support and shared projects online
Or let it run in the cloud
If you would rather not keep a Pi, computer or home connection running, StreamNeo keeps an uploaded video or playlist streaming to YouTube from the cloud. Upload your recording, add your YouTube stream key, then go live. Nothing has to stay on at home; uploaded video streams as made, up to 4K 60fps, at one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card required. A monthly slot costs $9.99 per month.
Recommended Free Tools
Quick Recap
Best Value
- 【What you Get】You will get 1*Pi 5 8GB Single Board,1*RasTech Case,1*Active Cooler,1*Screwdriver,1*Installation instructions,12-month free warranty, lifetime service, 24-hour prompt and friendly response.
- 【More Connectors】There are two USB 3.0 ports(5Gbps simultaneously) and two USB 2.0 ports, which triple total bandwidth ,support any combination of up to two cameras or displays. Peak SD card performance is doubled through support for the SDR104 high-speed mode. It provides a smooth desktop experience for you. Offer Gigabit Ethernet and a PCIe interface, along with dual-band Wi-Fi and Bluetooth 5.0/BLE wireless capability. The RasTech Pi 5 Kit use the new 27W 5.1V 5A USB-C power connector.
- 【 Support Dual 4Kp60 Display 】Each of the two microHDMI sockets can control a 4K display at 60 Hertz, now support HDR, offering super HD video for media streaming projects. RPi 5 is the first RPi model that comes with a PCI Express port (PCIe 2.0 x1 with 500 MB/s) to attach SSDs (requires separate M.2 HAT).
- 【 Excellent Chips And Applications】Pi 5 is a full-size Pi computer using silicon built in-house at Pi. The RP1 “southbridge” provides the bulk of the I/O capabilities for Pi 5. Pi 5 is more friendly and convenient in the development of Internet of Things, Web development, machine identification, automatic control and other electronic equipment applications and network.
- 【 Faster CPU, Better GPU 】 Pi 5 features a Broadcom BCM2712 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, it delivers a 2–3× increase in CPU performance relative to RaspberryPi 4. The 800MHz VideoCore VII GPU is compatible to OpenGL ES 3.1 and Vulkan 1.2, substantial uplift in graphics performance. Pi 5 Offers lightning-fast CPU speed, a PCI Express interface, a Real Time Clock (RTC) and a power button and runs significantly cooler than Pi 4.
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
