Free tools Windows power users keep installed
One-click scans. No signup required.
To tell whether your Wi-Fi is strong, check the signal where you actually use your device—not just beside the router. The Wi-Fi bars are a quick clue; a router’s client details or a Wi-Fi analyzer can show a more precise reading called RSSI, measured in dBm. RSSI values are usually negative, and the closer the number is to zero, the stronger the received signal: -55 dBm is stronger than -70 dBm. Treat common dBm ranges as guidance rather than universal pass-or-fail limits, and consider reliability and speed alongside signal.
How to check Wi-Fi signal strength
Start with the Wi-Fi indicator
Look at the Wi-Fi icon on your phone or computer while standing in the room where the connection is normally used. Bars are convenient, but their meaning is not standardized across devices, so use them as a quick comparison rather than a precise measurement.
As an Amazon Associate I earn from qualifying purchases.
Get an RSSI reading
For a numeric reading, check your router or access point’s connected-client details, or use a Wi-Fi analyzer app. Depending on the product, the router interface or companion app may expose RSSI. Microsoft recommends analyzer apps for checking signal around the home; NHS England Digital identifies professional survey tools as an option for accurate RSSI measurement.
RSSI is measured in dBm and commonly appears as a negative number. A less-negative value means a stronger received signal. It describes signal level, not internet speed.
#1 Best Overall
- Wi-Fi 6 Mesh Wi-Fi - Next-gen Wi-Fi 6 AX3000 whole home mesh system to eliminate weak Wi-Fi for good(2×2/HE160 2402 Mbps plus 2×2 574 Mbps)
- Whole Home WiFi Coverage - Covers up to 6500 square feet with seamless high-performance Wi-Fi 6 and eliminate dead zones and buffering. Better than traditional WiFi booster and Range Extenders
- Connect More Devices - Deco X55(3-pack) is strong enough to connect up to 150 devices with strong and reliable Wi-Fi
- Our Cybersecurity Commitment - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement
- More Gigabit Ports - Each Deco X55 has 3 Gigabit Ethernet ports(6 in total for a 2-pack) and supports Wired Ethernet Backhaul for better speeds. Any of them can work as a Wi-Fi Router
Compare the places you use Wi-Fi
Take readings in several rooms, especially where you notice trouble. Record the readings and run the same speed or reliability check in each place. Repeat after changing the router’s position or moving the device so you can see whether coverage improved. Microsoft Support recommends recording results in different parts of the home before and after changes.
What counts as a strong Wi-Fi signal?
There is no single cutoff that applies to every device, band, router, or activity. The following figures are examples from vendor guidance, not a universal grading standard.
Rank #2
- A New Way to WiFi: Deco Mesh technology gives you a better WiFi experience in all directions with faster WiFi speeds and strong WiFi signal to cover your whole home.
- Better Coverage than traditional WiFi routers: Deco S4 three units work seamlessly to create a WiFi mesh network that can cover homes up to 5, 500 square feet. No dead zone anymore.
- Seamless and Stable WiFi Mesh: Rather than wifi range extender that need multiple network names and passwords, Deco S4 allows you to enjoy seamless roaming throughout the house, with a single network name and password.
- Incredibly fast 3× 3 6 Stream AC1900 speeds makes the deco capable of providing connectivity for up to 100 devices.
- With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
| RSSI reading | How the cited guidance describes it | Context |
|---|---|---|
| Above -60 dBm | Excellent | Ubiquiti WiFi Troubleshooting Guide |
| -60 to -70 dBm | Acceptable in Ubiquiti’s guide; TP-Link labels -61 to -70 dBm fair | Descriptions vary by vendor |
| -71 to -80 dBm | TP-Link labels this poor; Ubiquiti says clients should begin roaming around -70 to -75 dBm | Different vendor guidance and use contexts |
| Below -80 dBm | Ubiquiti says instability is likely; TP-Link labels -81 dBm or lower very weak | Vendor guidance, not a guarantee of a specific outcome |
Ubiquiti’s separate connectivity guidance says -70 dBm or better is required for stable connections in its cited context. These thresholds can help orient you, but your own readings across rooms and the connection’s behavior matter more than treating one number as a definitive verdict. (Ubiquiti WiFi Troubleshooting Guide; TP-Link troubleshooting guidance; Ubiquiti connectivity guidance)
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →What to do if the signal is weak
- Compare with a nearby reading. Check RSSI near the router and again in the problem area. If it improves substantially nearby, local coverage or obstacles may be contributing to the problem.
- Improve placement. If practical, put the router or access point in a central, open, higher location and reduce obstacles between it and the devices. Retest in the rooms where you use Wi-Fi. Microsoft and TP-Link both recommend considering placement when troubleshooting coverage.
- Check mesh backhaul. If you use a mesh system, check the wireless signal between the router and the mesh access point. A weak link between nodes can limit the connection; adjust node placement and retest.
- Consider added coverage only if needed. If one area remains weak and you cannot conveniently move the router or device, an extender may help extend coverage. In a mesh setup, first check node placement and the backhaul link.
- Look beyond signal if performance remains poor. Strong RSSI does not rule out channel congestion, interference, device problems, or an issue with the internet connection. TP-Link recommends checking channel congestion and testing a wired connection when troubleshooting persistent instability.
Why a strong reading may not mean a good connection
Signal strength is only one part of Wi-Fi quality. NHS England Digital cautions that a single metric cannot determine overall performance or definitively identify every user problem. Congestion, interference, device behavior, and the upstream internet connection can all affect what you experience. Microsoft Support puts the practical point plainly: “A stronger signal gives you a better chance of a reliable Wi-Fi connection.”
Rank #3
- 𝐃𝐞𝐜𝐨 𝟕 𝐒𝐮𝐩𝐞𝐫𝐜𝐡𝐚𝐫𝐠𝐞𝐝 𝐰𝐢𝐭𝐡 𝟒-𝐒𝐭𝐫𝐞𝐚𝐦 𝐁𝐄𝟓𝟎𝟎𝟎 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢𝐅𝐢 𝟕: Delivers up to 4324 Mbps (5 GHz) and 688 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming, and more◇. Performance varies by conditions, distance to devices, & obstacles such as walls.
- 𝐒𝐞𝐚𝐦𝐥𝐞𝐬𝐬 𝐖𝐡𝐨𝐥𝐞-𝐇𝐨𝐦𝐞 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞: Covers up to 6,600 sq. ft. for over 150 devices with the option to expand anytime by adding another Deco router. All Deco routers work together.
- 𝐒𝐢𝐦𝐮𝐥𝐭𝐚𝐧𝐞𝐨𝐮𝐬 𝐖𝐢𝐫𝐞𝐝 & 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐁𝐚𝐜𝐤𝐡𝐚𝐮𝐥: Wi-Fi 7 and 2.5G Ethernet work together to balance traffic between Deco units for faster, more stable whole-home coverage. Backhaul requires at least two Deco units.§
- 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 & 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭: Set up and control your network in minutes with the Deco App. Keep your WiFi performing at its best by keeping the firmware updated through the App. All Wi-Fi routers require a separate modem. ⌂
- 𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Use RSSI to identify where reception is weaker, then compare it with the speed and reliability you actually get there. A reading is most useful as a location-by-location clue and as a before-and-after check—not as a promise of a particular speed.
Quick Recap
Best Value
- 𝐅𝐞𝐚𝐭𝐮𝐫𝐞-𝐑𝐢𝐜𝐡 𝐖𝐢-𝐅𝐢 𝐁𝐮𝐢𝐥𝐭 𝐭𝐨 𝐋𝐚𝐬𝐭: Get expansive whole-home coverage, fast Wi-Fi 7 speeds, and a future-ready 10G WAN/LAN port that stays ahead as your network grows. Ideal for both everyday users and performance-focused homeowners.
- 𝗩𝗮𝘀𝘁 𝗠𝗲𝘀𝗵 𝗖𝗼𝘃𝗲𝗿𝗮𝗴𝗲 & 𝗗𝗲𝘃𝗶𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The 3-pack mesh system covers up to a vast 7,600 sq.ft. and supports over 200 devices without compromising performance, ensuring seamless connectivity.
- 𝐁𝐄𝟏𝟎𝟎𝟎𝟎 𝐓𝐫𝐢-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝟕 𝐒𝐩𝐞𝐞𝐝𝐬: Delivers up to 5,188 Mbps (6 GHz), 4,324 Mbps (5 GHz), and 574 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming, and more. Performance varies by conditions, distance to devices, & obstacles such as walls.
- 𝗙𝗼𝘂𝗿 𝟮.𝟱𝗚 𝗪𝗔𝗡/𝗟𝗔𝗡 𝗣𝗼𝗿𝘁𝘀: Includes four 2.5G WAN/LAN ports and a USB 3.0 port, making it an ideal choice for future-proofing your home network.
- 𝐒𝐢𝐦𝐮𝐥𝐭𝐚𝐧𝐞𝐨𝐮𝐬 𝐖𝐢𝐫𝐞𝐝 & 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐁𝐚𝐜𝐤𝐡𝐚𝐮𝐥: Tri-band Wi-Fi 7 and 10G Ethernet work together to balance traffic between Deco units for faster, more stable whole-home coverage. Backhaul requires at least two Deco units.
Rank #4
- OUR MOST AFFORDABLE WI-FI 7 ROUTER - eero 7 helps you future-proof your network and make the most of Wi-Fi 7 performance starting today.
- SAY GOODBYE TO DEAD SPOTS - eero 7 minimizes network disruptions to help ensure you have fast, reliable wifi in every room of your home.
- FULL SPEED AHEAD - Support for internet plans up to 2.5 Gbps with two auto-sensing 2.5 GbE ports and wireless speeds up to 1.8 Gbps.
- HIGHLY CONNECTED - Three eero 7s support 120+ devices and 6,000 sq. ft. of coverage, so there’s plenty of reliable Wi-Fi 7 performance to go around.
- BACKWARD COMPATIBLE - eero 7 is backward compatible with all previous generations of eero and compatible with eero Built-in on select Amazon Echo devices.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
