Yes. Use a receiver, integrated amplifier, or powered-speaker system with compatible inputs, then select the turntable, TV, or phone as the source. The critical check is the turntable’s phono stage: either the record player or the receiving system must provide one. For a television, HDMI ARC/eARC is usually the most convenient connection when both devices have matching ports; optical or analog audio can work when they do not. A phone can connect by Bluetooth or another method explicitly supported by the system.
Compatibility is model-specific. Read the manuals and inspect the rear-panel labels before buying cables, adapters, or a separate preamp.
As an Amazon Associate I earn from qualifying purchases.
What the shared system needs
A shared setup has three source devices feeding one control point and one speaker pair. A receiver or integrated amplifier acts as that control point: you connect each source to a different input, choose the source on the front panel or remote, and hear it through the same speakers.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Passive speakers need an amplifier. A receiver or integrated amplifier supplies that power, provided its speaker outputs match the speakers’ requirements. Powered speakers have amplification built in, so they do not need a separate power amplifier; they do, however, need the right source inputs or an adapter that provides them.
#1 Best Overall
- 【Strong Adsorption】The inspiration of the silicone phone suction case comes from the adhesive force of the octopus. Each suction cup phone mount is 3.15 inches long and 2.17 inches wide, with 24 independent suction cups providing a stronger and more stable suction force, so you don't have to worry about your phone falling during use.
- 【Back of Phone Suction Grip】Remove the adhesive film on the phone suction cup and stick it on the phone case. You can then fix the phone on any smooth surface, which is very convenient. (The phone suction cup cannot be removed and reused after being attached to the phone case. It is recommended to attach it to a regular phone case, not a valuable one.)
- 【Widely Used】Our non-slip silicone phone sticky grip mount attaches to almost any flat phone case and make it compatible with common mobile phones such as iPhone and Android.You can shoot, watch videos or video calls in the kitchen, gym, dance studio, bathroom and other places.
- 【Capture the Wonderful Picture】Whether you are a TikTok creator or just like to share videos and photos, this phone suction cup can help you hands-free capture wonderful videos and photos for sharing with friends.
- 【Note】You can fix the phone suction cup on a smooth surface such as a mirror or glass. If necessary, wipe the suction cup with a damp cloth to obtain stronger suction. Before releasing your hand, make sure the phone is firmly fixed. (Not applicable to rough walls, wooden surfaces, and other uneven surfaces)
| Source | Connection to verify | Common failure if it is missing |
|---|---|---|
| Turntable | PHONO input, or a line input fed by a turntable’s built-in preamp or an external phono preamp | Very quiet, thin sound when a raw phono signal is connected to AUX or another line input |
| TV | HDMI ARC/eARC on both devices, or a matching optical or analog output/input | No audio because the cable is in a non-ARC HDMI socket or the TV output format is incompatible |
| Phone | Bluetooth playback or another wired/network method listed in the system’s manual | The phone sees no compatible playback device or pairs but cannot start audio |
| Speakers | Amplification built into the system or supplied for passive speakers | Sources appear connected, but the speakers produce no sound |
These are connection requirements, not guarantees that every receiver or speaker system includes every feature. A model’s specifications and manual are the final authority.
Connect the turntable correctly
Understand the phono stage
A cartridge produces a phono-level signal. It needs equalization and gain before a normal line input can use it. Sony’s support guidance states: “To connect a turntable to a stereo system, the stereo system should have a PHONO input.” When a PHONO input is unavailable, Sony says the turntable needs a built-in amplifier or an in-line amplifier before connecting to another input.
There are three workable arrangements:
- Receiver PHONO input: Connect a turntable configured for PHONO output to the receiver’s PHONO input. The receiver supplies the phono stage.
- Turntable with built-in preamp: Set the turntable to LINE output and connect it to an AUX, CD, or other line input. The turntable supplies the phono stage.
- External phono preamp: Connect a turntable without a built-in preamp to the preamp’s input, then connect the preamp’s line output to an AUX or other line input.
Do not run a signal through two phono stages. For example, a turntable set to LINE should not feed a receiver’s PHONO input, and a raw PHONO output should not feed a line input unless a separate preamp is in between.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Wire and ground it
- Turn the amplifier and turntable off.
- Connect the left and right RCA plugs to the matching left and right input jacks. Keep the channel colors consistent.
- Set the turntable’s output switch to PHONO when using a receiver’s PHONO input, or to LINE when using AUX or another line input. Some models label the equivalent setting as an EQ switch; follow that model’s manual.
- If the turntable has a thin ground wire and the receiver or phono preamp has a ground terminal, attach the wire and tighten the terminal. This can reduce hum.
- Select the corresponding input on the receiver and start playback at low volume.
An external phono preamp is conditional, not automatic. You need one only when the turntable lacks a built-in preamp and the receiver or amplifier lacks a PHONO input.
Rank #2
- SUPERIOR COMFORT — Unlike traditional circular ear buds, the design of EarPods is defined by the geometry of the ear. Which makes them more comfortable for more people than any other ear bud–style headphones.
- HIGH-QUALITY AUDIO — The speakers inside EarPods have been engineered to maximize sound output and minimize sound loss, which means you get high-quality audio.
- BUILT-IN REMOTE — EarPods with USB-C plug also include a built-in remote that lets you adjust the volume, control the playback of music and video, and answer or end calls with a pinch of the cord.
- COMPATIBILITY — Works with all devices that have a USB-C port.
- INTEGRATED MICROPHONE — A built-in microphone precisely captures your voice while you’re on the phone, taking a FaceTime call, or summoning Siri — so you’re always heard loud and clear.
Send TV audio to the same speakers
HDMI ARC or eARC
When the TV and receiver or speaker system both have HDMI ARC/eARC ports, run a cable from the television’s port labeled ARC or eARC to the system’s matching ARC/eARC port. Select that input on the system. Do not assume that every HDMI socket carries return audio; use the labeled port on each device.
Some systems also require a TV audio-output setting. Technics, for example, instructs users of the SC-CX700 to select PCM for its HDMI ARC connection. If ARC is connected but silent, check the TV’s digital-audio format options and try the mode specified by the receiving system’s manual.
Optical or analog alternatives
If ARC/eARC is unavailable, check for an optical output on the TV and a matching optical input on the receiver or speakers. A TV’s analog audio output can also work with a matching analog input, but the exact connector and volume behavior vary by model. Choose an input that the receiving device explicitly supports; do not buy an adapter until you have confirmed the ports on both sides.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →After cabling, select the optical or analog input on the system and set the TV’s sound output to that connection if the television requires manual selection. Keep the TV’s internal speakers from masking the test by confirming that audio is routed to the external output.
Rank #3
- Secure Hold: Our PopSockets adhesive phone grip gives your cell phone a secure, comfortable hold in hand to help prevent drops while texting, taking photos, or scrolling on the go. Designed to stick firmly to most phone cases and devices.
- Hands-Free Made Easy: Easily turn your PopSocket into a phone stand to prop up your phone anywhere, perfect for watching videos, video calls, or following recipes. A must-have phone holder that keeps your device secure and ready for anything.
- Compatibility: Works with all phones, tablets, and Kindles. Sticks best to smooth, hard plastic cases and may not adhere to silicone or textured cases. Easily swap your PopTop to change up your style.
- Black PopSockets: Simple, refined, and endlessly versatile. A timeless essential for any phone.
- Travel Must-Have for People On the Go: A must-have travel accessory for flights, flying, airports, air travel, airplanes, planes, international trips, cruises, and long travel days. Key gadget for your airport haul, travel accessories and must-haves.
Connect the phone
Bluetooth playback
Bluetooth is the simplest wireless option when the receiver or powered speakers support Bluetooth playback. Put the system in Bluetooth pairing mode, choose its name in the phone’s Bluetooth settings, and select the Bluetooth source on the system. Start with the phone’s volume at a moderate level, then adjust listening volume on the receiver or speakers.
Bluetooth availability is not universal. A device may include Bluetooth for a different function or omit it entirely, so verify that the manual specifically describes Bluetooth audio playback. Denon’s AVR-X2900H manual is an example of documentation that covers Bluetooth playback and source selection; that single model does not establish that every receiver offers the same feature.
Wired and network options
Some systems accept a phone through a line input, a USB connection, or app-based/network streaming. The phone may need a port adapter, and the system may support only certain protocols. Use the connection method listed for the exact phone and system rather than assuming that a charging cable will carry audio.
Recommended Free Tools
Step-by-step setup for all three sources
- Inventory the equipment. Write down every port on the turntable, TV, receiver or powered speakers, and phone. Identify whether the turntable output is PHONO or LINE and whether the speakers are passive or powered.
- Choose the control point. Use a receiver or integrated amplifier when you want several physical inputs and amplification for passive speakers. Use powered speakers when you prefer fewer boxes and the speakers include the required source connections.
- Plan the input map. Reserve the PHONO input for a raw phono signal, a line input for a turntable already set to LINE or for an external preamp, ARC/eARC or optical for the TV, and Bluetooth or another supported method for the phone.
- Connect the turntable. Follow the PHONO-versus-LINE procedure above, attach the ground wire when provided, and avoid two phono stages.
- Connect the TV. Use ARC/eARC on both devices when available. Otherwise use a matching optical or analog path and set the TV’s output format as required by the system.
- Pair or wire the phone. Enable the system’s Bluetooth playback mode and pair the phone, or use the exact wired/network method documented for both devices.
- Connect speakers and power. Passive speakers must be connected to the amplifier’s speaker terminals with correct polarity. Powered speakers connect to their own power and source inputs; do not connect powered speakers to speaker-level outputs unless their manual explicitly permits it.
- Test one source at a time. Start with the receiver or speaker volume low. Test a record, then TV audio, then phone playback, changing only one input at a time so a fault is easy to isolate.
- Label the inputs. If the receiver permits custom names, label them “Turntable,” “TV,” and “Phone.” This prevents selecting the wrong socket later.
Receiver versus powered speakers
Neither architecture is automatically better; the right choice depends on your existing equipment and the connections you need.
Rank #4
- [360 ° Flexible Rotation Design] Comes with a rotatable lanyard ring that supports 360 ° free rotation, effectively solving the problem of twisted and tangled lanyards
- [Wide compatibility] The ultra-thin 0.02-inch design does not block the charging port at all, and both wired and wireless charging can be used directly without removing the pad. Compatible with most smartphones such as iPhone, compatible with various wristbands, lanyards, crossbody straps, and keychains
- [Durable and Portable Material] Premium rust-resistant stainless steel material with good flexibility, which not only avoids scratching the phone case, but also has excellent anti rust and anti fading performance
- [Multi scenario Practical] Paired with a lanyard or wristband, hands-free use can be achieved. The phone is within reach and not easily dropped, ideal for daily commuting and outdoor activities. Suitable for full coverage phone cases, does not support half coverage phone cases
- [Quality Service] If you find any damage or other issues with the product upon receipt, please contact us immediately. We will handle it quickly
| Consideration | Receiver or integrated amplifier | Powered-speaker system |
|---|---|---|
| Passive speakers | Designed to power them, subject to the amplifier’s specifications | Not required; amplification is built into the speakers |
| Number of physical sources | Often offers several selectable inputs, but the exact mix is model-specific | May be simpler, with fewer inputs; verify the exact model |
| Turntable support | Look for PHONO, or use a line input with a preamp | Look for a PHONO input or a compatible line input and add a preamp only if needed |
| TV support | HDMI ARC/eARC or optical are common possibilities, not universal features | Some systems include TV-oriented inputs; confirm ARC/eARC or optical support |
| Phone support | Bluetooth or network playback may be included | Bluetooth or network playback may be included |
| Separate boxes and wiring | Can require an amplifier, speakers, and possibly a preamp | Can reduce component count, but adapters may still be necessary |
Official setup examples show both multi-source receivers and integrated systems that accept a turntable and TV. Treat those examples as illustrations, not promises about every product in a category.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Common problems and fixes
The turntable is extremely quiet
The usual cause is a raw PHONO output connected to AUX, CD, or another line input. Move it to a PHONO input, or enable the turntable’s built-in preamp and set it to LINE. If neither device has a phono stage, insert an external phono preamp between the turntable and the line input.
The turntable sounds distorted or unusually loud
A phono stage may be running twice. Set the turntable to PHONO when using the receiver’s PHONO input, or set it to LINE only when the receiving input is a normal line input. Never use LINE into PHONO.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsThere is a low hum
With the equipment powered down, connect the turntable’s ground wire to the receiver or preamp ground terminal if both provide one. Recheck that the RCA plugs are fully seated and keep signal cables away from power cables where practical.
Best Value
- 【PKYAA Double Sided Silicone Suction Phone Case Mount】PKYAA With Double Sided 40 Strong and Reliable individual suction cups, PKYAA provides a thicken and upgraded universal silicon suction mount for your phone.
- 【Friendly to Content Creators】If you are a content creator or an online influencer, you can create videos anywhere with this suction mount completely hands free with this silicone cell phone mount for cases.
- 【HANDS-FREE & Adhere to Mirrors】This Double Sided silicone suction phone case mount allows you to stick your phone to the mirror easily. No longer holding your phone in one hand to watch video tutorials while making up.
- 【Strong Grip on the Smooth Surface】You can easily hang your phone anywhere with a smooth surface. All you do is you clean off your phone and smooth surface. It is STURDY and it not only sticks to mirrors, it also sticks to windows, it sticks to refrigerators, tiles and other clean, flat surfaces.
- 【Press Down Firmly Every 30 Minutes】Use your palm or fingers to press the phone down firmly and check it's secure before letting go. Apply even pressure for a few seconds to allow the suction cup to adhere properly. To maintain the grip and prevent accidental falls, it's a good practice to periodically reapply pressure to the suction cup.
The TV shows an ARC connection but produces no sound
Confirm that the cable is in the TV’s ARC/eARC socket and the system’s corresponding socket, select the ARC input, and check the TV’s digital-audio format. Try PCM when the receiving system’s instructions call for it. If ARC is not available on both devices, switch to a matching optical or analog connection instead.
The phone pairs but audio comes from the wrong place
Select Bluetooth as the active source on the receiver or speakers and confirm that the phone’s output device is the system, not its internal speaker or another previously paired product. If the system does not advertise Bluetooth audio playback in its manual, use a supported wired or network method instead.
Nothing plays through the speakers
Check the selected input, mute state, speaker wiring, and amplification arrangement. Passive speakers must be connected to an amplifier; powered speakers must be switched on and connected to their own power. Inspect each connection at the device label rather than relying on the cable’s appearance.
Free tools Windows power users keep installed
One-click scans. No signup required.
Buying checklist
A practical search phrase is “AV receiver with phono input and HDMI ARC.” Before purchasing, verify all of these points for the exact model:
- It has a PHONO input, or you have a turntable with a built-in preamp or budget for an external one.
- Its TV input matches the television: HDMI ARC/eARC on both sides, optical on both sides, or compatible analog connectors.
- It supports the phone method you intend to use, such as Bluetooth playback.
- It can power your passive speakers, or it is explicitly designed to work with your powered speakers.
- The available input count leaves room for other sources you may add later.
- The manual describes the required TV audio settings and any pairing procedure.
Manufacturer manuals from Sony, Yamaha, NAD, Denon, Sonos, Technics, Klipsch, and Samsung all illustrate why checking the actual model matters: port names, preamp arrangements, and TV settings differ.
Bottom line
One pair of speakers can serve a turntable, TV, and phone. Build the system around a receiver, integrated amplifier, or powered speakers that provide one compatible path for each source. Confirm the turntable’s phono stage first, use ARC/eARC when both TV and system support it, and treat Bluetooth as a feature to verify rather than assume. Once the ports, signal levels, and speaker amplification match, switching among records, television audio, and phone playback is straightforward.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
