Freedom251 › Audio Analysis Software
RME DigiCheck NG
Plans
| Plan | Billed and limits | Price |
|---|---|---|
| DigiCheck NG | Free to users of supported RME hardware · RME audio interface required · macOS 10.15+ with Metal hardware · Windows release in beta | Free |
As rme-audio.de lists them, read 15 Oct 2026. The maker's own page has the final word.
Facts from RME DigiCheck NG's own pages
- Company headquarters
- Audio AG’s stated address is Am Pfanderling 60, 85778 Haimhausen, Germany. · rme-audio.de, 15 Oct 2026
- Company legal name
- RME’s imprint identifies Audio AG as the legal entity, registered in Munich as HRB 142967. · rme-audio.de, 15 Oct 2026
- Company status
- Crunchbase describes RME as a private, for-profit company headquartered in Haimhausen, Bavaria, and shows no funding amount. · crunchbase.com, 15 Oct 2026
- Distributor description
- Audio AG describes itself as the worldwide exclusive distributor for RME and ALVA products, providing sales, support and service through distributors. · audioag.com, 15 Oct 2026
- Download requirements
- The v0.93 Windows download requires Windows 10 or later and a Direct3D 12-capable graphics card. · rme-audio.de, 15 Oct 2026
- Driver data paths
- The manual says DigiCheck NG can run alongside other software; DriverKit exposes input and playback data, while the kernel-extension driver exposes input data. · rme-audio.de, 15 Oct 2026
- Founded
- RME’s archived company page says the German developer team was founded in 1996. · archiv.rme-audio.de, 15 Oct 2026
- Global meter
- The global meter gives an overview of all channels on the interface. · rme-audio.de, 15 Oct 2026
- Hardware integration
- The application communicates directly with RME interfaces for precise readings while keeping CPU use low. · rme-audio.de, 15 Oct 2026
- Independent feature report
- MusicNetwork reported that v0.93 added Spectroscope and listed peak, RMS, VU, spectrum, goniometer, bit-statistics and EBU R128 tools. · musicnetwork.ch, 15 Oct 2026
- Independent preview report
- Gearnews described the 2020 preview as a ground-up rewrite and reported that the Windows version was planned but not yet available then. · gearnews.de, 15 Oct 2026
- Limit: hardware lock
- SoundWorksK found that non-RME hardware such as a TASCAM interface was not available for selection. · soundworksk.net, 15 Oct 2026
- Limit: input configuration
- A Steinberg forum user reported difficulty routing the original signal around SoundID Reference before finding a multi-output-device workaround. · forums.steinberg.net, 15 Oct 2026
- Limit: loudness controls
- SoundWorksK reported that the beta had few loudness settings and fixed the small loudness display’s lower bound at -10 LUFS. · soundworksk.net, 15 Oct 2026
- Limit: systemwide routing
- A Sonarworks community user reported that SoundID Reference could feed DigiCheck the already-corrected signal, requiring third-party routing to analyze the original signal. · support.sonarworks.com, 15 Oct 2026
- macOS support
- The official product page lists macOS 10.15 or later and Metal-capable hardware. · rme-audio.de, 15 Oct 2026
- Multichannel meter
- The multichannel meter displays as many as eight channels simultaneously. · rme-audio.de, 15 Oct 2026
- Notable update
- Recording.de reported on 11 January 2025 that an update for macOS and Windows added the requested VU meter. · recording.de, 15 Oct 2026
- Oscilloscope
- The oscilloscope offers triggered waveform viewing, afterglow and multichannel operation. · rme-audio.de, 15 Oct 2026
- Praise: analyzer breadth
- A SoundWorksK reviewer praised the spectrum analyzer and vector scope as reducing the need for separate DAW analyzer plug-ins. · soundworksk.net, 15 Oct 2026
- Praise: interface redesign
- All4Sound described the Windows update as cleaner and more intuitive than the older engineering-oriented interface. · hp.all4sound.com, 15 Oct 2026
- Purpose
- DigiCheck NG is RME’s rewritten suite for measuring, analyzing and visualizing digital audio signals. · rme-audio.de, 15 Oct 2026
- RME-only requirement
- DigiCheck NG requires an RME interface because its metering depends on proprietary FPGA hardware. · rme-audio.de, 15 Oct 2026
- Setup workflow
- All4Sound said setup involves TotalMix routing or loopback, with device selection in the Audio Device Setup screen and per-meter input selection. · hp.all4sound.com, 15 Oct 2026
Where RME DigiCheck NG stands on Freedom251
- Audio Analysis Software#14 of 43