ReaderSense Edge + MDM
What ReaderSense Edge + MDM is
ReaderSense Edge + MDM combines RFID middleware running on Identium fixed readers with a cloud console for managing reader fleets. Edge runs on an industrial quad-core ARM64 Linux board with 2 GB of RAM and eMMC storage. A browser interface served by the reader can be opened from a laptop or phone on the local network, without an installer or on-site PC. Reads are stored on the device and queued events are sent in order when the network returns, including after reboots. Rules can react to input changes or tag events by pulsing a relay, sounding an alarm, triggering a read burst, or calling a webhook. MDM reports reader health and telemetry and supports remote sessions, configuration changes, and firmware updates through an encrypted outbound connection. Scoped, time-limited enrollment tokens and individual device revocation support fleet administration, while remote actions are logged. Tracking reports zones typically at 1–3 m, direction, and radial speed; camera-fused positioning is limited to camera view. The product is intended for deployments such as warehouse gates, production stations, and store exits. Pricing is on request.
Who it suits
It is intended for organizations deploying Identium fixed readers at locations such as warehouse gates, production stations, or store exits. MDM is suited to managing enrolled reader fleets across sites.
What it does well
- Reader interface works on the local network
- Queues reads during outages and after reboots
- Rules can trigger relays, alarms, bursts, or webhooks
- MDM supports remote configuration and firmware updates
- Individual devices can be revoked
What to know first
- Requires an Identium fixed reader
- Whole-floor item coordinates are not supported
- Angle-of-arrival positioning is not supported
- Pricing is available on request
Limits
Tracking is zone-level, typically 1–3 m, with direction and radial speed; camera-fused position is available within camera view. It does not support whole-floor item coordinates, angle-of-arrival positioning, or phase ranging in the stated band.
Getting started
- Visit https://www.identiumone.com/ReaderSense-Edge-MDM/.
- Arrange pricing through a quotation.
- Deploy Edge on an Identium fixed reader with the stated Linux board requirements.
- Open the reader’s browser interface from a laptop or phone on the local network.
- Enroll readers in MDM using scoped, time-boxed enrollment tokens.
- Consider the maker’s one-month pilot for one Edge reader on one gate.
Verdict
ReaderSense Edge + MDM combines local RFID processing and fleet administration, with offline event handling and remote management. Its tracking is zone-level rather than whole-floor item positioning, and pricing is provided on request.
Questions
What does ReaderSense Edge + MDM do?
Edge is RFID middleware that runs on the Linux board inside Identium fixed readers. MDM is a cloud console for managing enrolled readers.
What does it cost?
The product page gives no price. Pricing is provided on request and stated on the quotation.
What platforms does it support?
The listed platforms are Linux and web. The browser interface is served by the reader and can be accessed from a laptop or phone on the local network.
Does it need an Identium account for integrations?
The maker says HTTP or WebSocket uploads, MQTT with TLS, rules-triggered webhooks, and RS485 Modbus RTU do not require an Identium account.
What tracking does it provide?
It reports zone-level tracking typically at 1–3 m, direction, and radial speed. Camera-fused position is available within camera view.
Who makes ReaderSense Edge + MDM?
The product is from Identium, whose headquarters are listed in New Delhi, India.
Facts from ReaderSense Edge + MDM's own pages
- Browser interface
- The reader serves its own browser interface on port 80, accessible from a laptop or phone on the local network without an installer or on-site PC. · identiumone.com, 5 Oct 2026
- Enrollment and revocation
- MDM uses scoped, time-boxed enrollment tokens and lets administrators revoke an individual device; remote actions are recorded in hub and device audit logs. · identiumone.com, 5 Oct 2026
- Fleet management
- MDM reports reader health and telemetry and supports live remote sessions, configuration pushes and firmware updates through each reader’s outbound tunnel. · identiumone.com, 5 Oct 2026
- Hardware requirements
- Edge runs on an Identium fixed reader’s quad-core ARM64 Linux board with 2 GB RAM and eMMC storage, plus Ethernet, serial ports, USB, and industrial I/O. · identiumone.com, 5 Oct 2026
- Headquarters
- New Delhi, India · identiumone.com, 28 Sept 2026
- Integrations
- The product supports HTTP or WebSocket data upload, MQTT with TLS, rules-triggered webhooks, and RS485 Modbus RTU; the maker says these paths do not require an Identium account. · identiumone.com, 5 Oct 2026
- Intended users
- The maker describes the product for reader deployments such as warehouse gates, production stations, and store exits, with MDM for managing fleets across sites. · identiumone.com, 5 Oct 2026
- I/O
- The board has four isolated inputs and four outputs, including three relays and one driver, for equipment such as barriers, stack lights and PLC handshakes. · identiumone.com, 5 Oct 2026
- Location limits
- The product reports zone-level tracking typically at 1–3 m, direction and radial speed, but says it cannot provide whole-floor item coordinates, angle-of-arrival positioning or phase ranging in the stated band. · identiumone.com, 5 Oct 2026
- MDM enrollment and audit
- MDM enrollment tokens are scoped and time-boxed; devices can be revoked individually, and remote actions are recorded in hub and device logs. · identiumone.com, 5 Oct 2026
- MDM remote access
- Readers connect to MDM through an outbound encrypted WebSocket, allowing remote sessions, configuration pushes, and firmware updates without opening inbound network ports. · identiumone.com, 5 Oct 2026
- Offline operation
- Reads are stored in SQLite on the board’s eMMC and queued events drain in order when the network returns, including after reboots. · identiumone.com, 5 Oct 2026
- On-reader interface
- The reader serves a browser interface on its own address, accessible from a laptop or phone on the LAN without an installer or on-site PC. · identiumone.com, 5 Oct 2026
- Pilot
- The maker invites customers to pilot one Edge reader on one gate for a month. · identiumone.com, 5 Oct 2026
- Pricing and licensing
- The product page gives no price; the maker’s export page says software is included or licensed depending on the product and stated on the quotation. · identiumone.com, 5 Oct 2026
- Purpose
- ReaderSense Edge is RFID middleware that runs on a fixed reader’s Linux board, while MDM provides a cloud console for managing the reader fleet. · identiumone.com, 5 Oct 2026
- Reader hardware
- Edge runs on an industrial Linux board with quad-core ARM64, 2 GB RAM and eMMC storage, built into Identium fixed readers. · identiumone.com, 5 Oct 2026
- Rules and alerts
- Rules can trigger relay pulses, alarm patterns, read bursts or webhooks, and alerts remain available after network outages. · identiumone.com, 5 Oct 2026
- Rules and I/O
- Rules can respond to input edges or tag events by pulsing a relay, sounding an alarm, triggering a read burst, or calling a webhook. · identiumone.com, 5 Oct 2026
- Security controls
- The maker states that each unit uses a signed hardware-bound license key and supports multi-user roles, a forced first-login password change, and an audit trail. · identiumone.com, 5 Oct 2026
- Support
- Identium says its Delhi-based team responds to project enquiries within one business day. · identiumone.com, 5 Oct 2026
- Tracking limits
- The product reports zone-level tracking typically at 1–3 m, direction and radial speed, and camera-fused position within camera view; it does not support whole-floor item coordinates, angle-of-arrival positioning, or phase ranging in the stated band. · identiumone.com, 5 Oct 2026
- What it does
- ReaderSense Edge is on-device RFID middleware that runs on the Linux board inside Identium fixed readers; ReaderSense MDM provides a cloud console for managing enrolled readers. · identiumone.com, 5 Oct 2026
Where ReaderSense Edge + MDM stands on Freedom251
- RFID Software#22 of 26