Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
The Onkyo TX-NR575 remains a capable choice for a tested, low-cost 4K/60 home-theater system: it supports Dolby Atmos up to 5.2.2, DTS:X, Dolby Vision and HDR10 pass-through, and has a phono input and powered Zone 2. Its key limitation is age: it is not an HDMI 2.1/eARC receiver, so it cannot switch 4K/120 gaming video. Buy one used only after checking its HDMI, speaker outputs and stability under load.
What the Onkyo TX-NR575 is
The TX-NR575 is a 2017-era, network-connected 7.2-channel A/V receiver. It can handle a conventional home theater, music from network or wireless sources, television audio, and a second powered audio zone. Onkyo’s official product specifications describe its features and connectivity; it is a legacy model rather than a current retail receiver.
| # | Preview | Product | Price | |
|---|---|---|---|---|
| 1 |
|
Replacement for ONKYO AV Receiver Remote Controller - RC-911R RC911R | $7.95 | Buy on Amazon |
| 2 |
|
Onkyo TX-NR6100 7.2 Channel THX Certified Network AV Receiver - Black | $649.00 | Buy on Amazon |
| 3 |
|
Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver | $1,049.95 | Buy on Amazon |
“7.2” describes seven amplifier channels and two subwoofer pre-outs; it does not mean the receiver can run seven ear-level speakers plus four Atmos height speakers. Its Atmos ceiling is 5.2.2. Regional versions such as the TX-NR575E may differ, so check the suffix and the manual for the exact unit rather than assuming U.S. specifications apply.
TX-NR575 specifications
| Feature | Published specification |
|---|---|
| Amplifier channels | 7.2 |
| FTC power rating | 80 W per channel, 8 ohms, 20 Hz–20 kHz, two channels driven, 0.08% THD |
| Other power figure | 170 W per channel, 6 ohms, 1 kHz, one channel driven, 10% THD |
| Speaker impedance | 4–16 ohms |
| Surround formats | Dolby Atmos up to 5.2.2; DTS:X |
| Room setup | AccuEQ with AccuReflex |
| HDMI | Six inputs, one output; 4K/60 pass-through, HDCP 2.2, HDR10, Dolby Vision, ARC |
| Other audio connections | Phono input, six analog audio inputs, two optical and one coaxial digital input, rear USB |
| Subwoofer outputs | Two pre-outs |
| Network and wireless | Ethernet, dual-band 802.11a/b/g/n Wi-Fi, Bluetooth 4.1 + Low Energy |
| Multi-room and zones | FlareConnect; powered Zone 2 and Zone 2 line output |
| Dimensions and weight | 17 1/8 × 6 13/16 × 14 7/8 inches; 20.7 lb |
| Power consumption | 460 W listed consumption; 0.15 W listed standby consumption |
These specifications are from Onkyo’s product page and product sheet. The 80 W figure is the more useful comparison for ordinary two-channel listening. The 170 W headline figure uses a different, less demanding test condition and should not be read as normal output with multiple channels playing. Power ratings are comparable only when their test conditions match.
#1 Best Overall
- Perfect replacement for ONKYO AV remote control, the new RC-911R RC911R remote control, without any program.
- This is the best replacement remote when your original remote is broke or got lost.
- It is easy to operate and use without programming or pairing, and the keys are sensitive.
- High quality alternative remote control, suitable for HT-S7800 TX-NR555 TX-NR575 TX-NR585 TX-NR656 TX-NR686 TX-NR676 TX-NR757 TX-NR777 TX-NR787 TX-RZ610 TX-RZ710 TX-RZ720 remoteen
- If you have any problems during the process, please contact us via Amazon messenger, we promise to solve the problem for you within 24 hours!
Sound, speakers and Atmos layouts
Choosing a speaker layout
The receiver can power up to seven main channels. Common arrangements include 5.1 (five main speakers and a subwoofer), 7.1 (seven main speakers and a subwoofer), or 5.2.2 (five ear-level speakers, up to two subwoofers, and two height channels). For Atmos, select the matching layout in the receiver’s speaker setup and connect height speakers to the designated terminals. The owner’s manual includes wiring and layout diagrams.
AccuEQ measures speakers and room response during setup; AccuReflex helps align Dolby Atmos-enabled elevation speakers. The receiver also offers Dolby Surround and DTS Neural:X upmixing, along with Direct and Pure listening modes and other sound-processing features. These are useful options, but AccuEQ should not be mistaken for a newer premium correction system such as Dirac Live or Audyssey MultEQ XT32.
Onkyo lists a 4–16-ohm speaker range. That is not a guarantee that every difficult 4-ohm speaker can be driven loudly without strain: low impedance, sustained high volume, several active channels and poor ventilation can stress an older receiver. The two subwoofer jacks are pre-outs, not two separately calibrated bass channels.
HDMI, 4K, HDR and gaming compatibility
For sources that output at 4K/60 or below, the TX-NR575 has useful modern-for-its-generation support: HDCP 2.2, HDR10, Dolby Vision and BT.2020 compatibility are listed, alongside ARC and HDMI-CEC-related control. It can suit a 4K Blu-ray player, streaming box, cable box or older game console, subject to correct settings throughout the source, receiver and display chain.
It is not an HDMI 2.1/eARC receiver according to the published specification. It therefore cannot switch 4K/120 video or pass through VRR and ALLM as a modern gaming receiver would. A PS5, Xbox Series X or gaming PC can instead connect directly to a compatible TV, with audio returned to the receiver over ARC where the TV and format allow. That arrangement avoids using the receiver as a 4K/120 switch, but ARC does not offer the same audio-return capability as eARC. If eARC or receiver-based 4K/120 switching is essential, choose a newer model.
Inputs, turntables and multi-room use
The dedicated phono input is convenient for a moving-magnet turntable. If the turntable has a built-in phono preamp set to line output, connect it to a line-level analog input rather than the receiver’s phono input. Other connections include optical and coaxial digital audio, analog inputs, rear USB, Ethernet and two subwoofer pre-outs. There is no front HDMI input or full set of multichannel analog pre-outs listed.
Powered Zone 2 can drive speakers in another room, while a Zone 2 line output supports a separate external amplifier. The receiver also lists FlareConnect for multi-room audio. Check the manual for source and output restrictions before planning a particular combination of main-room and second-zone playback.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Rank #2
- 210 W/Ch THX Certified Select Dynamic Audio Amplification system
- 5.2.2-channel Dolby Atmos and DTS:X playback
- 8K with HDMI 2.1 40Gbps (3 ins)
- THX Select Certification
- Discrete Zone 2 Audio and Video
Streaming and firmware-dependent features
Onkyo lists Spotify Connect, Tidal, internet radio, PC/network and USB playback, AirPlay and Bluetooth. Chromecast built-in and FlareConnect functionality were added or expanded through firmware updates. The receiver’s hardware capability does not guarantee that every listed service, app or authentication method still works in a given region in 2026: providers can change or discontinue services independently.
Onkyo’s April 1, 2024 firmware notes list security improvements, Deezer HiFi support and minor fixes and stability improvements. This is a dated reference, not confirmation that it is the newest release. Consult the TX-NR575 support page for current documentation and available updates.
Initial setup and firmware update
Connect and calibrate the system
- Place the receiver where its ventilation openings are unobstructed. Power it off before connecting speakers.
- Wire speakers to the terminals for the layout you intend to use, checking polarity and ensuring no loose copper strands can touch another terminal.
- Connect the TV to the receiver’s HDMI output, then connect source devices to the HDMI inputs. For TV audio return, use the TV’s ARC-labeled HDMI port.
- Connect the supplied AccuEQ microphone at the listening position and follow the on-screen initial setup. Select the actual speaker layout, then run AccuEQ and AccuReflex if using compatible Atmos-enabled speakers.
- Confirm the TV picture, source audio format and network connection. If a network service or HDMI feature behaves unexpectedly, check for an available firmware update before concluding that the receiver lacks the function.
The manual’s original package contents list the RC-911R remote, batteries, setup microphone, FM antenna, AM loop antenna and setup materials. For a used purchase, the remote and microphone are especially useful for normal operation and calibration.
Update firmware
The receiver’s menu path is Setup → Misc. → Firmware Update. Onkyo’s firmware update instructions cover the network and USB methods.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitches- Check the model and regional suffix, then note the installed version under Setup → Misc. → Firmware Update.
- For a network update, use a stable connection; Ethernet avoids some Wi-Fi interruptions. Network updates can take longer or fail because of connection conditions.
- For USB updating, follow the official instructions for the exact firmware package. They require the receiver to be disconnected from wired or wireless networking and a FAT-formatted USB drive with at least 128 MB available. Put the extracted files in the required location on the drive.
- Start the update and do not power off the receiver while it runs. The instructions say a USB update may take approximately 30 minutes.
- If the update errors, freezes or fails repeatedly, stop rather than trying firmware for another model. Recheck the official instructions and contact support if needed.
Network-service availability can vary by region and change over time, as the manual notes. An update cannot guarantee that a third-party service remains available.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Used-buying checklist
There is no verified current market price established here for a TX-NR575, so judge an offer against the unit’s condition, completeness, return terms and the cost of a newer receiver—not its historical launch price. A secondary listing records an original U.S. price of about $549, which is historical context, not a 2026 used valuation (HiFi Engine specification listing).
What to test before paying
- Ask for a cold start and confirm the on-screen setup menu appears.
- Test HDMI picture and sound from the inputs you need, using a known-good cable and display; ideally test every input and the output.
- Confirm sound from each speaker channel and both subwoofer outputs.
- Test the phono input if it matters to you, then pair a Bluetooth device and check network access or a streaming function.
- Operate the remote and check that the AccuEQ microphone is included.
- Run the receiver at moderate volume for 30–60 minutes and watch for shutdown, distortion or protection warnings.
- Inspect ventilation openings and ask whether it was used in a closed cabinet. Heat exposure and operational instability matter more than cosmetic wear alone.
Intermittent HDMI handshaking, shutdowns, liquid damage, corrosion or repaired HDMI-board faults are reasons to walk away or negotiate heavily. Owner anecdotes can identify symptoms worth checking, but do not establish a model-wide failure rate.
Rank #3
Common problems and first checks
“Check SP Wire” or sudden shutdown
Turn the receiver off and inspect for stray wire strands, loose connections or incorrectly wired speakers. Disconnect all speaker wires, then reconnect and test one speaker at a time at moderate volume. Improve ventilation. If protection behavior returns with speakers disconnected, an internal amplifier or power-supply fault is possible; do not try to bypass protection circuits.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
No picture through HDMI
Confirm the selected receiver and TV inputs, check the cable and source resolution, and verify HDCP compatibility. If using TV audio return, connect to the TV’s ARC port and enable the appropriate control settings. Try the source directly on the display to isolate the problem. A 4K/120 source is beyond the receiver’s switching capability, not something a different cable can fix.
No Dolby Atmos
Check that the source soundtrack carries Atmos, the player sends a compatible bitstream rather than forcing stereo PCM, the receiver layout includes height channels, and the speakers use the designated terminals. Check the receiver’s information display for the incoming format. A 5.1 soundtrack does not become discrete Atmos simply because height speakers are connected.
No subwoofer in stereo
Verify the subwoofer is connected to a subwoofer pre-out and powered on. Check speaker size, crossover and bass-management settings, and make sure the listening mode is not bypassing bass management.
Network or streaming trouble
Check firmware, try Ethernet, verify Wi-Fi credentials and router isolation settings, and see whether the service still works in your region. Test the service on another device to distinguish receiver or network trouble from a provider-side change.
Recommended Free Tools
Is the TX-NR575 worth buying in 2026?
It is a sensible used option when the price is substantially below a current receiver, the unit passes a real functional test, and the system needs 4K/60 rather than 4K/120. It is particularly useful if 5.2.2 Atmos, a phono input or powered Zone 2 match the planned setup. No current used price can be recommended without checking the specific listing, condition and return policy.
Choose a current receiver if you need 4K/120, VRR, eARC, longer-term app support or warranty-backed reliability. The TX-NR6100 is an Onkyo alternative; Denon’s AVR-X1800H and Yamaha’s RX-V6A are other current-platform options to investigate. Compare the exact connectivity, room-correction system, software support and local warranty on each manufacturer’s page rather than assuming a newer model is automatically better in sound quality. See Onkyo TX-NR6100, Denon X-series receivers and Yamaha RX-V6A.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
