Recommended: Crashes or Glitches? A Free Driver Scan Usually Finds the Culprit →Recommended: PC Feels Slow? A Free Scan Shows What's Dragging Windows Down →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
You can mount a TV on a ceiling if the ceiling mount is compatible with the TV and its fasteners transfer the load into sound structural framing or suitable concrete. Drywall, plaster, suspended-ceiling tiles, and the mount’s weight rating alone are not enough. Check the TV’s weight and VESA pattern, identify the structure and concealed services, and follow the exact mount and TV instructions before drilling.
Can your TV and ceiling support a ceiling mount?
Start with two separate checks: whether the mount fits the TV, and whether the ceiling can support the complete installation. A mount’s rated capacity does not make weak framing or damaged concrete safe. The relevant load includes the TV and mount; a long pole or extended arm also adds leverage when the TV is adjusted.
- TV weight: Use the TV’s weight without its stand and compare it with the mount’s stated limit. Do not choose by screen size alone or plan to operate at the limit unless the manufacturer’s instructions say it is suitable.
- VESA pattern: VESA is the horizontal-by-vertical spacing, in millimeters, between the threaded mounting holes on the TV. Common patterns include 200 × 200, 400 × 200, and 600 × 400 mm. Check the TV specifications or measure between hole centers, then verify that the mount supports that exact pattern.
- TV hardware and clearance: Confirm the required screw diameter and length, whether spacers are needed, and whether the brackets will block ports or ventilation. A screw that is too long can bottom out in the TV; one that is too short may not secure the bracket. Follow the TV and mount manuals rather than guessing.
- Ceiling structure: The plate must fasten into an appropriate joist, beam, engineered blocking, or sound concrete using the specified hardware. A stud finder can help locate framing, but do not treat its reading as proof if the structure is uncertain.
- Room and viewing position: Measure ceiling height, seating distance, screen position, and the clearance needed for tilt, swivel, cables, lights, fans, cabinets, and sprinklers. A TV high overhead can be uncomfortable to view, and a low ceiling may leave too little room for a pole or adjustment.
Ceiling mounting can solve a lack of usable wall space or serve a room with several viewing positions. It may be a poor choice where the screen would hang over people and the structure is uncertain, where heat, moisture, vibration, or impact is a concern, or where a large TV would need reinforcement. If you cannot identify the framing or confirm the ceiling’s condition, stop and get a qualified installer’s assessment.
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Choose a mount for the ceiling and viewing position
- Fixed or low-profile: A simple option for a flat ceiling and one viewing position. It offers little adjustment and can make access to ports and cables harder.
- Tilt or swivel: Tilting can improve an overhead viewing angle or reduce glare; swiveling helps when viewers sit in different places. Check the product’s actual adjustment range and whether cables can move with it.
- Articulating or adjustable-height: Useful when the TV needs repositioning or lowering, but moving parts and a longer drop call for careful installation and cable slack.
- Extension-pole mount: Often useful for tall or vaulted rooms and commercial spaces. Measure the finished screen height before buying; a longer drop increases leverage and may need stronger structural support.
Not every mount fits every ceiling. Some are intended for flat ceilings; others are designed for sloped surfaces. A suspended ceiling tile or grid is not a structural support: a mount there needs a separate system that transfers its load to the building structure above. Metal joists, trusses, and engineered I-joists may need reinforcement or a professional’s assessment.
#1 Best Overall
Sale
PERLESMITH Ceiling TV Mount for 26-65 inch Flat Screen Displays, Max VESA 400x400mm, Hanging Adjustable Ceiling TV Bracket Fits Most LCD LED OLED 4K TVs, Pole Ceiling Mount Holds up to 110lbs, PSCM2
- WIDE COMPATIBILITY- This TV ceiling mount fits most 26-65 inch flat screen TVs with VESA 100×100 mm (4"×4") to 400×400 mm (16"×16"), holding up to 110 lbs/50 kg, Please check the TV weight, VESA pattern before purchase. Compatible with wood stud, concrete, and brick wall mounting. Do not install the mount on drywall alone.
- HEIGHT ADJUSTMENT- This ceiling mount TV bracket comes with a very sturdy construction TV pole mount allowing the screen display to extend 20.47”to 29.92”from ceiling to center of TV plate for the perfect viewing angle, NOT flip down or fold down.
- 360° OF SWIVEL- The full motion ceiling TV mount can tilt +5°/-15° to reduce glare and swivels 360° to direct the screen toward your position for a more comfortable experience. Level the TV +/-3° after installation to perfectly tune the TV’s position. The ceiling mount is out of the way of everything and a good option to set up various viewing angles.
- DURABLE & SAVING SPACE- Perfect for commercial use in restaurant, coffee shop, gym, grocery stores, airport, shopping mall and your home (gazebo church basement attic outdoor patio back porch fireplace) and more Needn’t to drill through the fireplace rock or inserting it in the ceiling and securing it in the sloped ceiling attic is the best option.
- WIRE MANAGEMENT&10 YEAR SERVICE- Heavy duty construction allowing for cables to be hidden in the center tube makes it appear extremely professional and clean comes with all needed hardware for mounting on a variety of surfaces as well as fitting a large variety of television backs.
Manufacturer specifications illustrate why compatibility must be checked model by model. For example, VIVO lists the VC02A for 17- to 55-inch TVs up to 44 pounds and the VC90-5 for 37- to 90-inch TVs up to 110 pounds, with different VESA ranges and ceiling compatibility. These are product-specific listings, not a general recommendation: confirm current specifications and your TV’s details on the VC02A or VC90-5 product page and in the installation manual.
Tools and supplies
Gather the mount and its complete hardware kit, tape measure, pencil, level, drill and the specified wood or masonry bits, socket wrench or ratchet, screwdriver, and any required hex keys. You will also need a stable ladder or work platform, safety glasses, and a helper to lift and secure the TV. A stud-finding method, attic access, or inspection camera can help verify the structure and check for obstructions.
Rank #2
WALI Ceiling TV Mount for Most 26-65 inch LCD LED 4K TVs, up to 110 lbs
- Universal Compatibility：WALI ceiling tv mount up down fits most displays up to 65 inches and 110 lbs. Supported mounting hole patterns: 400×400 mm (16"×16"), 300×300 mm (12"×12"), 200×200 mm (8"×8"), 200×100 mm (8"×4"), and 100×100 mm (4"×4"). Please check if the VESA and TV weight are suitable before purchase.
- Stable & Saving Space：Steel and aluminum construction, strength tested to support up to 110 lbs with ease, you can rest assured that your TV is held safe and secure on this heavy-duty tv ceiling mount. It can be mounted on flat ceilings, sloped ceilings, vaulted ceilings, or even 90° flat against the side of a joist. Compatible with wood stud, concrete, and brick wall mounting. Do not install the mount on drywall alone !
- Full Motion Flexibility：Adjustable ceiling mount tv bracket provides 2-inch incremental height adjustment, ranging from 21.4" to 30.3" from ceiling to the center of the mounting plate, ensuring the perfect viewing angle. The flip down ceiling tv mount can be tilted down 25°, 360° left-right swivel, and 3° rotation in both directions.
- Indoor & Outdoor Use：Perfect for commercial use in restaurants, coffee shops, bars, gyms, grocery stores, airports, shopping malls, fitness centers, schools, dental and medical clinics, and department stores. The outdoor tv mount is also ideal for use in your home, such as bedroom, garage, basement, attic, terrace, patio, gazebo, back porch, or fireplace. Meets unique DIY needs, such as mounting TVs in unconventional locations like workshops, RV or campers.
- Easy Installation & Cable Managemen：Comes with all needed hardware and clear installation guide, installation is simple and hassle free. Heavy duty construction allowing for cables to be hidden in the center tube makes it appear extremely professional and clean.
Use the manufacturer-supplied fasteners or replacements that meet its stated specification. Do not substitute generic drywall anchors, ordinary wood screws, or random concrete anchors. For cables, plan suitable signal cable and an approved power solution before closing any openings.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Before drilling: check the TV, location, and ceiling
- Read both manuals. Record the mount’s supported TV size, weight, VESA range, permitted ceiling types and angles, required hole spacing, fastener and pilot-hole specifications, adjustment limits, and locking-hardware requirements. Check the TV manual for mounting orientation, screw details, and ventilation needs.
- Mark the intended screen position. Measure the viewing distance and finished screen height. Check clearance for the TV throughout its tilt and swivel range, including nearby walls, cabinets, fans, lights, and sprinklers. Make sure ports will remain accessible.
- Verify the structural mounting point. Locate the center of the appropriate joist or beam, or confirm that the concrete is sound and suitable for the specified anchors. Attic access or careful inspection may help. If the plate’s holes do not align with adequate structure, do not improvise with drywall anchors or use an arbitrary single fastener. Consider engineered blocking, another location, or professional help.
- Check for concealed services. Before drilling, look for wiring, plumbing, ducts, recessed lights, and other obstructions using the available access and appropriate detection methods. A ceiling-mount manual also advises checking for electrical and water lines before drilling; uncertainty is a reason to stop, not guess. See the example installation instructions.
How to mount a TV on the ceiling
- Position and level the ceiling plate. Use the manufacturer’s template or plate. Align every specified mounting point with the approved structural support, orient it toward the intended viewing direction, level it, and mark the holes. A level plate does not necessarily make the screen level; some mounts have a separate screen adjustment.
- Drill the specified holes. For wood, use the pilot-hole diameter and depth in the mount manual and drill straight into the structural member. For concrete, use the specified masonry bit, depth, anchor, and hole-cleaning procedure. These details are not universal: one example manual calls for 5/32-inch pilot holes 2.75 inches deep in wood and 3/8-inch holes 3 inches deep in concrete, but those dimensions apply only to that product’s instructions, not to all mounts. See the example manual.
- Fasten the ceiling plate. Start all specified fasteners before tightening, keep the plate aligned, and tighten evenly. Follow any torque requirement. Do not crush the ceiling finish beneath the plate unless the mount is specifically designed for that arrangement. Stop if a fastener spins, strips, will not seat, or meets unexpected resistance; also stop if the ceiling cracks, flexes, or pulls away.
- Assemble the pole or adjustment mechanism. Follow the manual’s sequence and install all retaining bolts. Lock any height adjustment, then set the mount within its permitted tilt, swivel, and ceiling-angle range. Use a model specifically rated for a sloped ceiling where needed.
- Attach the VESA brackets to the TV. Protect the screen on a clean, padded surface and follow both manuals. Select the specified screw diameter, test it by hand, and use the correct spacers for a recessed or uneven back. Confirm the screw engages properly without bottoming out. Keep brackets centered and clear of ports and ventilation; tighten securely, not excessively.
- Lift the TV into place with a helper. Lift from the sides, not by pressing on the panel. Engage the hooks, rails, or keyholes fully and keep fingers clear of pinch points. Install every supplied safety screw, pin, strap, or other locking device. Do not leave the TV merely resting on hooks.
- Route and connect cables. Leave enough slack for the mount’s full movement range without putting tension on the TV’s ports. Keep cables away from sharp edges and the locking mechanism, and secure them so they cannot snag or hang into a walkway. Do not conceal an ordinary TV power cord or extension cord inside a ceiling as a substitute for fixed wiring. Use an appropriate electrical solution and consult a qualified electrician when new wiring or a power relocation is needed.
- Adjust and test gradually. Check the fasteners and lock, level the screen, and move it slowly through its intended range. Verify that cables do not bind and that the TV does not slide or lift free. Turn it on and test connected devices. Recheck the installation after initial use and periodically thereafter.
Route signal and power cables safely
Signal cables and power wiring are not interchangeable. Where HDMI, Ethernet, coaxial, or other signal cables pass through a ceiling or wall, use cable rated for that concealed route and follow applicable local requirements. Keep a service loop for any movement, but do not let excess cable snag or pull on connectors.
Rank #3
Sale
AX WABER Ceiling TV Mount Adjustable Bracket for 26-65 inch LCD LED OLED 4K TVs, Pole Ceiling Mount Holds up to 110lbs,Hanging tv Mount Max VESA 400x400mm (AX11TB01), Black
- HEIGHT ADJUSTMENT-Full motion ceiling mount comes with installation template so it really simple to install with a very sturdy construction TV pole mount allows the display to extend 20.47”to 29.92”from ceiling to center of TV plate for the perfect viewing angle
- DURABLE & SAVING SPACE-It is highly suitable for commercial use in various settings such as restaurants, coffee shops, bars, gyms, grocery stores, airports, shopping malls, fitness centers, schools, dental and medical clinics, and department stores. It is also ideal for use in your home, such as on the patio, in the basement, attic, outdoor terrace,gazebo，back porch, or fireplace. hanging TV bracket can be hung on the roof, saving valuable indoor space
- 360 degree rotation and tilt function- Tilt down 25° up 5° Left-right swivel range of 360°, The height is adjustable, you can choose whether to adjust the bracket or the poles according to your actual needs
- COMPATIBILITY- Ceiling TV Mount bracket Fits26",30", 32",40",42",43",50",55",60",65" flat-panel LCD/LED TVs , Maximum Load Capacity 88 lbs. Mounting hole pattern: 400x400 400x300 400x200 300x300 200x200 200x100 100x100mm
- WIRE MANAGEMENT&10 YEAR SERVICE-Heavy duty construction allowing for cables to be hidden in the center tube makes it appear extremely professional and clean Comes with all needed hardware for mounting on a variety of surfaces as well as fitting a large variety of television backs
Do not fish a normal detachable TV power cord or extension cord through a ceiling as permanent wiring. OSHA’s construction electrical rule says flexible cords must not be used as a substitute for fixed wiring or run through holes in walls, ceilings, or floors except where specifically permitted; the applicable rules depend on the work and jurisdiction. Review the OSHA wiring rule and use a properly installed receptacle, an approved power relocation solution, or surface raceway as appropriate. For new electrical work, ask a licensed electrician about local code and inspection requirements.
Special ceiling situations
- Sloped or vaulted ceiling: Choose a mount expressly compatible with the ceiling angle and measure the drop to the final screen position. A long pole can improve viewing height but increases leverage. Do not assume a flat-ceiling model will work on a slope.
- Concrete: Use a mount and anchors approved for the specific substrate, with the specified bit size, embedment, spacing, and dust-removal procedure. Confirm the concrete is sound and thick enough. Do not drill if post-tension cables, rebar, conduits, or other embedded services may be present and their location is unknown.
- Metal framing, trusses, or engineered joists: These may need a designed adapter or reinforcement. Thin metal framing is not automatically suitable for a TV load, and drilling into a truss or engineered joist may be restricted. Seek manufacturer guidance or a qualified installer.
- Suspended ceiling: Never attach the TV to the tile or grid alone. A structural support system must transfer the load to the building structure above.
- Above a bed, seating area, or public walkway: The consequences of a failure are higher. Use positive locking hardware and have a professional verify the structure if there is any uncertainty; public or commercial installations may also require tamper-resistant hardware, cable protection, or an engineering review.
Troubleshooting and when to stop
- The TV is not level: Check the mount’s screen-level adjustment and confirm the bracket arms are installed evenly. Do not loosen a structural plate to compensate unless the manual instructs you to.
- The mount wobbles, sags, or moves unexpectedly: Stop using it. Check for missing locks, loose fasteners, incorrect anchors, damaged framing or concrete, and excessive extension. Do not try to solve movement by tightening random fasteners.
- The screws do not fit the TV: Recheck the specified diameter and length and use the required spacers. Do not force a screw or use one that bottoms out.
- The joist does not line up with the plate: Move the installation, add properly engineered blocking, or hire a professional. Do not rely on a partial attachment or drywall anchors.
- The cables pull tight or a port is blocked: Disconnect power before rerouting. Add suitable slack or revise the route and bracket arrangement; do not leave connectors under tension.
- The mount does not fit the ceiling angle: Replace it with a model rated for that surface or use an appropriate structural solution. Do not bend or modify the mount.
Hire a qualified installer when the TV is unusually large or heavy, framing is inaccessible or uncertain, metal framing or trusses are involved, the ceiling needs reinforcement, concrete may contain post-tension cables, new electrical work is required, or the installation is over a high-traffic public area. If the TV moves, the ceiling cracks, or a fastener loosens after installation, keep people clear and have the structure and mount inspected before using the TV again.
Quick Recap
SaleBestseller No. 3
SaleBestseller No. 4
Bestseller No. 5
Best Value
PERLESMITH Ceiling TV Mount for 37–75 inch TVs up to 110 lbs
- Wide Compatibility: This full motion ceiling mount is compatible with most 37” to 75” flat or curved TVs up to 99 lbs with VESA mounting patterns 200x100 to 600x400mm. Please verify the size, weight, and VESA pattern of your TV before purchase.
- Space-Saving Solution: If wall mounting is not an ideal choice, a ceiling mount TV bracket is a fantastic way to free up valuable space. Easily install this hanging TV mount on flat or sloped ceilings — ideal for both home and commercial use, from living rooms and bedrooms to attics, restaurants, bars, gyms, schools, coffee shops, and more.
- 6 Adjustable Heights: The TV ceiling mount is designed with a telescoping steel pole that can extend from 28.2” to 40” from the ceiling to the TV bracket. So you can adjust the pole based on the TV size and ceiling height to achieve the optimal viewing height.
- Ultimate Viewing Flexibility: This ceiling TV mount 75 inch allows for 360° swivel, making it easy to view from anywhere in the room. To reduce glare, tilt the screen from +5° to -15°, and after installation, you can fine-tune the TV’s position with a +/-3° level adjustment.
- Easy Installation & Cable Management: With a clear instruction manual and standard mounting hardware, this ceiling TV bracket 65 inch is easy and hassle-free to set up. The hollow tube design of this ceiling mount for TV helps keep cables out of sight, creating a tidy, organized space.
Rank #4
Sale
USX STAR Ceiling TV Mount for 26-65 inch TVs, 360° Swivel Full Motion Ceiling Mount TV Bracket, Height Adjustable, Tilt TVs Ceilings Mounts, Supports up to 110 Lbs, Max VESA 400x400mm
- CEILING TV MOUNT: With our premium tv ceiling mount, you can save valuable floor space and increase the functionality of your room. Perfect for homes, theaters, schools, hospitals, hotels and more.
- FITS 26” TO 65” TVs: This full-motion ceiling mount accommodates most 26”-65” TVs up to 110 lbs with VESA mounting patterns 50x50 to 400x400mm. Be sure to verify your TV's size, weight, and VESA pattern prior to purchase.
- FULLY ADJUSTABLE: Achieve the perfect viewing angle with our full motion design that allows for height adjustment (21.14 to 29.02 inches), tilt down up to 15 degrees, 360 degree full rotation/swivel, and up to 90 degrees of swivel at the base for angled/sloped ceilings.
- EASY INSTALLATION: With cable management holes in the bracket plate, installation is simple and hassle free. Compatible with all types of ceilings, you'll have easy access to cords and ports to keep your setup clean and organized.
Final safety check
- The mount matches the TV’s weight, VESA pattern, and required screw hardware.
- The ceiling plate is secured to verified structural support or suitable concrete—not just the finish.
- Specified fasteners and all locking screws, pins, or straps are installed.
- The TV is fully engaged, level, and clear of nearby fixtures.
- Cables remain slack through the adjustment range, and no ordinary power cord is concealed as fixed wiring.
- The mount moves only as intended, without wobble, sagging, cracking, or cable strain.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallSpecial offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
